• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.984-986
• /
• 1999

In the case of immobilizing of glucose oxidase in organic polymer using electrosynthesis, the glucose oxidase obstructs charge transfer and mass transport during the film growth. This may lead to short chained polymer and make charge-coupling weak between the glucose oxidase and the backbone of the polymer. That is mainly due to insulating property and net chain of the glucose oxidase. Such being the case, it is useless to increase in amount of glucose oxidase more than reasonable in the synthetic solution. We establish by means of qualitative analysis that amount of immobilized glucose oxidase can be improved by adding a hole ethyl alcohol in the synthetic solution. As ethyl alcohol was added by 0.1mol $dm^{-3}$ in the synthetic solution, the faradic impedance of resultant electrode was increased about five times as much as the case of ethyl alcohol free in the solution, and mass transport was limited more than over. That is due to insulating property and net chain of the glucose oxidase. Moreover, in ultraviolet spectra of the synthetic solution, the adsorption peak at 285nm corresponding to glucose oxidase was decreased. It suggests increase in amount of immobilized glucose oxidase.

• Macromolecular Research
• /
• 제12권3호
• /
• pp.263-268
• /
• 2004

We have synthesized a water-soluble polyimide precursor, poly(amic acid) amine salt (PAD), from pyromellitic dianhydride (PMDA), 4,4'-oxydianiline, and N,N -dimethylethanolamine (DMEA) and have investigated in detail its properties with respect to the degree of salt formation (D$\_$sf/). The maximum value of D$\_$sf/ we obtained upon precipitation of the precursor solution into acetone was 79%. We synthesized a PAD having a D$\_$sf/ of 100% (PAD100) by the solid state drying of an organic solution. The precursors showed different solubility depending on the D$\_$sf/ to make up to 4 wt% solutions in water containing a small amount of DMEA. PAD100 is completely soluble in pure water. We investigated the imidization behavior of PAD in aqueous solution using various spectroscopic methods, which revealed that PAD 100 has faster imidization kinetics relative to that of the poly(amic acid)-type precursors. The resulting polyimide films prepared from an aqueous precursor solution possess almost similar physical and thermal properties as those prepared from N-methyl-2-pyrrolidone(NMP) solution. Therefore, we have demonstrated that PAD can be used as a water-based precursor of polyimide; this procedure avoids the use of toxic organic solvents, such as NMP.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.152-155
• /
• 2005

A dynamic density functional theory is presented for the observation of the phase revolutions of a solution-casting film of di- and tri-block copolymers under solvent evaporation conditions. With the evaporation of the solvent, the inverted phases, the minor part of the component becomes the continuous phase at the higher solvent evaporation rate, as observed in this experiment. Further simulation revealed that these inverted phases are converted into the normal phase and the major part of the component becomes the continuous phase, implying that the inverted phases observed in this experiment are unstable.

• Korea-Australia Rheology Journal
• /
• 제21권1호
• /
• pp.1-12
• /
• 2009

This paper reports the suitability of a domain decomposition technique for the hybrid simulation of dilute polymer solution flows using Eulerian Brownian dynamics and Radial Basis Function Networks (RBFN) based methods. The Brownian Configuration Fields (BCF) and RBFN method incorporates the features of the BCF scheme (which render both closed form constitutive equations and a particle tracking process unnecessary) and a mesh-less method (which eliminates element-based discretisation of domains). However, when dealing with large scale problems, there appear several difficulties: the high computational time associated with the Stochastic Simulation Technique (SST), and the ill-condition of the system matrix associated with the RBFN. One way to overcome these disadvantages is to use parallel domain decomposition (DD) techniques. This approach makes the BCF-RBFN method more suitable for large scale problems.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1995년도 추계 총회 및 학술발표회
• /
• pp.45-46
• /
• 1995

Generally, two different techniques have been employed for the precipitation of membranes from a polymer casting solution. In the first method, a precipitant is introduced from a vapor phase. In this case the precipitaion rate is very slow and a more or less symmetric structure is formed. In the second method, a precipitant is added to a casting solution by immersing the cast polymer film in a nonsolvent bath. In this case the precipitation rate is very fast and a skinned asymmetric membrane structure is obtained. In this study, we introduced water-vapor to PSf/NMP solution and took photographs of phase separation phenomena of polymer lean phase.

• Journal of Ship and Ocean Technology
• /
• 제9권1호
• /
• pp.27-37
• /
• 2005

An experimental study has been carried out as a basic research for the development of the friction drag reduction technology for water-borne vehicles by injecting microbubbles or polymer solution. Experimental apparatus and procedures have been devised and prepared to measure the changes of the wall friction with the injection of additives and the basic experimental data on friction drag reduction are obtained for fully developed channel flows. The effects of key controlling parameters were investigated for higher drag reduction with varying the concentration and the injection rate of additives. The frictional drag has been reduced up to $25\%$ with the microbubble injection and $50\%$ with the polymer solution injection.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1447-1449
• /
• 2009

We report the syntheses bis-(N,N-diethylaminoethyl) perylene-3,4,9,10-tetracarboxylic diimide (PDI) of lyotropic chromonic liquid crystal and it dissolves in photocurable ionic monomer solution. PDI-acrylic acid solution was observed whether liquid crystal phase appeared in each concentration. Thin film polarizer was prepared by simultaneously coating and aligning the solution of PDI-acrylic acid (in the chromonic nematic phase) onto glass substrates using a mechanical shearing force and was cured by irradiation of UV light. Also Photopatterned polarizer is manufactured by same process.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.321-329
• /
• 2019

A series of poly(hyroxyamide)s (PHAs) was prepared by direct polycondensation reaction of 4,4'-(2,3-pyridinedioxy)dibenzoic acid and/or isophthalic acid with 3,3'-dihydroxybenzidine. The yield percentages of the products were high, and the inherent viscosities of the polymer in DMAc solution at 35℃ were 0.31-0.59 dL/g. All PHA polymers were found to be soluble in polar aprotic solvents such as DMAc, DMSO, NMP, and DMF. On the other hand, LiCl was required to dissolve IPHA-1 in aprotic solvents. Poly(benzoxazole)s (PBOs) were partially soluble in conc-H₂SO₄; IPBO-4, -5, and -6 were partially soluble in NMP only when LiCl was added to the solution, and the solution was heated. The PBO polymers showed a maximum weight loss in the temperature range of 654-680℃, and the char yields at 900℃ under nitrogen atmosphere exceeded 63%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.147-150
• /
• 1999

In the case of immobilizing of glucose oxidase in organic polymer using electrosynthesis, the glucose oxidase obstructs charge transfer and mass transport during the film growth. This may lead to short chained polymer and/or make charge-coupling weak between the glucose oxidase and the backbone of the polymer. That is mainly due to insulating property and net chain of the glucose oxidase. Since being the case, it is useless to increase in amount of glucose oxidase more than reasonable in the synthetic solution. We establish qualitatively that amount of immobilization can be improved by adding a little ethanol in the synthetic solution. As ethanol was added by 0.1 rnol dm" in the synthetic solution, Michaelis-Menten constants of the resulting enzyme electrode decreased from 30.7 mmol $dm^{-3}$ to about 2 mmol $dm^{-3}$. That suggests increase in affinity of the enzyme electrode for glucose and in amount of the immobilized enzyme.zyme.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2000년도 춘계 학술발표회 논문집
• /
• pp.7-10
• /
• 2000