• 한국산업융합학회 논문집
• /
• 제24권4_2호
• /
• pp.509-515
• /
• 2021

In this study, a pressure vessel for a heat pipe was fabricated by bonding a metal thin film using a polymer compound sheet. In order to confirm the applicability of the experimentally manufactured copper material thin heat pipe of 0.6 mm or less, the pressure resistance and effective thermal conductivity for pressure generated according to the type of the working fluid of the heat pipe were evaluated to suggest the commercialization potential of the thin heat pipe. As a result of evaluating the pressure resistance and effective thermal conductivity performance of the thin heat pipe, the following conclusions were drawn. 1) Using a PEEK-based polymer compound sheet, it was possible to fabricate a pressure vessel for a thin heat pipe with a pressure resistance of up to 1.0 MPa by bonding a copper thin film, and the possibility of commercialization was confirmed at a temperature below 120 ℃. 2) In the case of the effective thermal conductivity performance evaluation test, the effective thermal conductivity of ethanol was higher than that of FC72 and Novec7000, and in the case of ethanol, the maximum effective thermal conductivity was 2,851 W/mK at 3.0 W of heating.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 자동차부품 제작기술의 진보
• /
• pp.63-73
• /
• 1996

CAFE(기업평균연비) 규제의 적극적 대응책의 하나로 차체 경량화가 주목받고 있다. 이를 위해 사용되는 고분자 복합소재 중 특히 Exterior Body Panel에 많이 채택되고 있는 SMC(Sheet Molding Compound)에 대해 제조방법, 성형공정, 기술적 과제, 재활용, 적용 예 등을 살펴보았다. 1973년 GM의 Corvette로부터 본격적으로 사용되기 시작한 SMC는 미국, 유럽을 중심으로 사용량이 계속 증가되고 있으며, 자동화가 용이하고 성형Cycle이 짧아 타 열경화성 고분자복합재료 성형방법에 비해 대량생산에 유리하며, 도장 특성이 우수하며 자 동차 부품용으로 가장 보편적인 방식이다.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.647-653
• /
• 2003

An important class of short-fiber reinforced composites is the sheet molding compound, which is recently developed and currently used in many engineering applications. Fatigue failure of the composites is a subject of major concern in design and cyclic crack propagation is of particular significance in the fatigue life prediction of short fiber composites. However, research on the fatigue behavior of polymer injection weld, especially short glass fiber-filled polymer injection weld, has not been carried out. In this study the analyses of the fatigue crack growth behaviors at weld line and in the bulk are performed based on low cycle fatigue test.

• Structural Engineering and Mechanics
• /
• 제74권1호
• /
• pp.145-156
• /
• 2020

There are separate merits and demerits to wood and steel. The combination of wood and steel as a compound section is able to improve the properties of both and ultimately increase their final bearing capacity. The composite cross-section made of steel and wood has higher hardness while showing more ductility and the local buckling of steel is delayed or completely prevented. The purpose of this study is to investigate the behavior of composite columns enclosed in wooden logs and the hollow sections of steel that will be examined in a laboratory environment under the axial load to determine the final bearing capacity and sample deformation. In terms of methodology, steel sheet and carbon fiber reinforced polymer sheet (FRP) are tested to construct hollow rectangular sections and reinforce timber. Besides, the method of connecting hollow sections and timber including glue and screw has been also investigated. As a result, timber lumber enclosed with carbon fiber-reinforced polymer sheets in which fibers are horizontally located at 90° are more resistant with better ductility.

• 한국환경과학회지
• /
• 제12권7호
• /
• pp.801-807
• /
• 2003

This work aims the search of environmentally friendly pre-treatment technologies to develop chromate replacements for metal finishing industries due to its toxicological properties. Since the corrosion resistance of steel was strongly related to water permeation, galvanized steel sheets were treated with various hydrophobic silane compounds and water-suspended polymer solution. Also, plasma gas discharge was applied to modify the surface of a polymer coated-steel sheet to be hydrophobic. The surface hydrophobicity of materials was introduced by CF$_3$H plasma exposure. The corrosion property before and after the plasma treatment was investigated in a slat spray tester with 3.5 wt.% NaCl at 35$^{\circ}C$. The results showed that both silane/polymer double coatings and plasma treatment of the galvanized steel exhibited significant retardation of corrosion.

• 폴리머
• /
• 제31권6호
• /
• pp.543-549
• /
• 2007

폴리우레탄의 우수한 기계적 물성에 전기 전도성을 가질 수 있도록 은 입자와의 복합체를 제조하였다. 균일하고 우수한 물성을 나타내기 위해서는 고른 분산성이 중요하게 되는데 폴리우레탄의 hard segment와 soft segment를 바꿔가며 가장 열적 안정성이 뛰어나고 은 입자를 균일하게 분산시킬 수 있는 폴리우레탄의 구조를 파악하였다. 열적 안정성은 방향족 증가와 사슬의 hard segment 비율 증가에 따라 높아짐을 알 수 있었고 분산성에서는 hard segment의 방향족이 포함된 것이 지방족보다 우수한 분산성을 가졌다. 또한 soft segment에 따라서는 낮은 분자량에서 사슬의 motility로 인해 좋은 분산성을 나타내었다. 하지만 전기 전도성에서는 고른 분산성보다도 입자간의 inter-connection을 이룰 수 있는 형태가 가장 낮은 저항값을 나타내었으며. NDI와 낮은 분자량의 PEG로 이루처진 복합체가 가장 좋은 물성을 나타내었다.

• 접착 및 계면
• /
• 제21권3호
• /
• pp.101-106
• /
• 2020

본 연구에서는 에폭시 수지를 개질 한 변성 아크릴레이트를 합성하였으며, 이를 기존의 유리 섬유 복합소재에 사용하는 SMC 조성물에 5 phr - 15 phr을 첨가하여 SMC 소재를 제조하였다. SMC 프리프레그를 고온고압 (150 ℃, 10 bar)에서 컴프레션 몰딩방법으로 성형하여 유리섬유 복합소재를 제조하였으며, 제조된 복합소재를 가공하여 인장강도, 충격강도 등의 기계적 물성을 연구하였다. 실험 결과 합성된 변성 아크릴레이트를 5 phr을 포함하는 복합소재가 합성 아크릴레이트를 포함하지 않는 binder 샘플보다 인장강도는 약 20%, 충격강도는 약 12% 향상함을 보였으며, 이는 합성 아크릴레이트가 폴리에스터와 반응할 수 있는 4개의 아크릴 기를 가짐으로써 가교반응을 강하게 하면서 기계적 강도가 향상됨을 확인하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.276-281
• /
• 1999

The surfaces of sheets added with N-chloro-polyacrylamide (N-Cl-PAM) are analyzed using X-ray photoelectron spectroscopy (XPS) to clarify the chemical bonding involved in the paper strength development induced by N-Cl-PAM. The comparison of the observed N1s chemical shift of the sheet with those of the paper strength additives and the model compound, 1-butyryl-3-propyl urea, illustrated the presence of covalent bonds of alkyl acyl urea and urethane on the fiber surfaces. Thus the formation of the covalent bonds by N-Cl-PAM themselves and by N-Cl-PAM with cellulose and hemicellulose may be an explanation for much higher effectiveness of N-Cl-PAM on the improvement of wet strength of paper than A-PAM.

• 한국가스학회지
• /
• 제2권3호
• /
• pp.1-11
• /
• 1998

열 수축 쉬-트용 점착제의 접착성, 내한성 및 유동성을 향상시키기 위해 점착제를 구성하는 각 성분들의 종류 및 함량에 따른 물성을 평가하였다. 본 연구에서는 베이스 폴리머로서 내후성이 우수한 부틸고무를 선정하여 실험을 진행하였다. 점착부여제는 석유계 수지가 로진보다 우수한 접착력을 나타내었으며, 함량이 감소함에 따라 유동성이 저하됨을 알 수 있었다. 폴리부텐은 저 분자량보다 고 분자량의 물성이 우수하였다. 카본블랙의 경우 입자경이 클수록 물성 향상에 유리하였다. 탄산칼슘을 중량제로서 혼입할 경우 카본블랙과 함께 혼합시키는 경우가 바람직하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2684-2688
• /
• 2014

Two two-dimensional cyanide- and phenoxo-bridged heterometallic M(II)-Mn(III) (M = Ni, Pd) coordination polymers $\{[Mn(saltmen)]_4[Ni(CN)_4]\}(ClO_4)_2{\cdot}CH_3OH{\cdot}H_2O$ (1) and $\{[Mn(saltmen)]_4[Pd(CN)_4]\}(ClO_4)_2{\cdot}CH_3CN{\cdot}H_2O$ (2) ($saltmen^{2-}$ = N,N'-(1,1,2,2-tetramethylethylene)bis(salicylideneaminato)dianion) have been obtained by using $K_2[M(CN)_4]$ as building blocks and a salen-tpye Schiff-base manganese(III) compound as assembling segment. Single X-ray analysis reveals their isostrutural cyanide-bridged $MMn_4$ pentanuclear cationic structure. The four Schiff base manganese units of the pentanuclear entity are self-complementary through the phenoxo oxygen atoms from the neighboring complex, therefore forming cyanide- and phenoxo-bridged 2D sheet-like structure. Investigation over magnetic susceptibilities reveals the overall ferromagnetic coupling between the adjacent Mn(III) ions bridged by the phenoxo oxygen atoms with J = 2.13 and $2.21cm^{-1}$ for complexes 1 and 2, respectively.