• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.196-205
• /
• 2023

Water-dispersed pigment is on-going study for without air pollution in the textile and print industry. Primer treatment is essential for the substrate to improve the printing quality of eco-friendly water-dispersed pigment ink. Otherwise in the case of untreated primer, the water-dispersed pigment ink will dry onto the surface and cause defective images. This study was conducted on film substrate coating (primer) to fix eco-friendly water-dispersed pigment ink on film substrate. The drying, bleeding, and color strength of the pigment ink were examined depending on the composition and mixing ratio of the coating solution. The mixing ratio of silica gel in the coating film is increased to 0, 0.5, 1, 2 and 3 and results that DK-1-3 of silica gel ratio of 1 showed the lowest bleeding such as 52%, the letter thickness of 0.76mm and DK-1-5 of SG ratio of 3 showed the highest bleeding such as 304%, the letter thickness of 2.02mm. The mixing ratio of SPA in the coating film is increased to 2.5, 5, 7.5, SPA ratio of 7.5 has a bleeding ratio of 9% and letter thickness of 0.544mm. It showed the closest value to 0.5mm. According to the result, the optimal mixing ratio of binder, polymer coagulant, silica gel is 100:7.5:1.

• Journal of Advanced Technology Convergence
• /
• v.3 no.2
• /
• pp.25-31
• /
• 2024

In recent industrialization and development due to information and communication technology, modern women in modern society are exposed to physical and mental health due to numerous stresses. Popular inflammations are attributable to a decrease in lactic acid bacteria, frequent antibiotic use, and a decrease in immunity. It is necessary to develop products that are helpful and reflected. The inner care gel currently introduced on the market can increase beneficial bacteria and maintain a healthy y-zone. The inner gel contains a hydrogel component. 90% is made up of water, and other components act as support for supporting water and are formed through crosslinking between polymer chains. Hydroxyethyl cellulose (HEC) is a hydroxyethyl ethylenetel of cellulose. The purpose of use is to act as a binder, an emulsion stabilizer, a viscosity enhancer (water-soluble), and a film forming agent. CA (crosslinker) is a crosslinking agent and serves to bind. Hydrogel in the beauty field acts as a film forming agent that gently wraps around the skin by forming a thin film and serves as an emulsion stabilizer that helps to prevent separation of other raw materials. It also acts as a thickener by increasing viscosity in cosmetics. In addition, it is used for glucose monitoring, nursing care, cell transplantation, and wound treatment in the bio field. Currently, it is understood that no products using functional hydrogel have been released, so in this study, a Y zone care hydrogel solution was manufactured to find out the antibacterial properties of the functional hydrogel, and a new solution was developed. As a result, it was confirmed that the appropriate Ph was applied to the Y zone, and after culturing Candida albicans in PDB medium, all three products of the Y zone care hydrogel solution showed an antibacterial effect of 0.5-1.0mm

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.7-12
• /
• 2024

The durability of the catalyst support has a significant effect on the durability of proton exchange membrane fuel cells (PEMFC). The accelerated durability evaluation of the catalyst support is performed at a high voltage (1.0 to 1.5 V), and the catalyst and ionomer binder in the catalyst layer are also deteriorated, hindering the evaluation of the durability of the support. The existing protocol (DOE protocol) was improved to find conditions in which the support, which is a durability evaluation target, deteriorates further. A protocol (MDOE) was developed in which the relative humidity was lowered by 35% and the number of voltage changes was reduced. After repeating the 1.0 ↔ 1.5 V voltage change cycle, the catalyst mass activitiy (MA), electrochemical active area (ECSA), electrical double layer capacity (DLC), Pt dissolution and particle growth were analyzed. Reaching 40% reduction in mass activity, the MDOE protocol took only 500 cycles, reducing the number of voltage changes compared to the DOE method and increasing the degradation of the carbon support by 50% compared to the DOE protocol.