• 융합신호처리학회논문지
• /
• 제14권4호
• /
• pp.212-216
• /
• 2013

As virtual reality technologies are advanced rapidly, how to render 3D objects across modalities is becoming an important issue. This study is therefore aimed to investigate human discriminability on the curvature of 3D polygonal surfaces with focusing on the vision and touch senses because they are most dominant when explore 3D shapes. For the study, we designed a psychophysical experiment using signal detection theory to determine curvature discrimination for three conditions: haptic only, visual only, and both haptic and visual. The results show that there is no statistically significant difference among the conditions although the threshold in the haptic condition is the lowest. The results also indicate that rendering using both visual and haptic channels could degrade the performance of discrimination on a 3D global shape. These results must be considered when a multimodal rendering system is designed in near future.

• 한국표면공학회지
• /
• 제29권1호
• /
• pp.45-59
• /
• 1996

Ultrafine powders(UFPs) of aluminum nitride(AlN) have been synthesized by chemical reactions in the nitrogen atmosphere and the gaseous aluminum evaporated from Al powders in thermal plasmas produced by a DC plasma torch. A synthesis system consisting of a plasma torch, a finely-controllable powder feeder, a reaction chamber, and a quenching-collection chamber have been designed and manufactured, and a filter for gathering AlN UFPs produced by the quenching process subsequent to the synthesis is set up. The synthesis process is interpreted by numerical analyses of the plasma-particle interaction and the chemical equilibrium state, respectively, and a fully-saturated fractional factorial test is used to find the optimum process conditions. The degrees and ultrafineness of synthesis are evaluated by means of SEM, TEM, XRD, and ESCA analyses. AlN UFPs synthesized in the optimum process conditions have polygonal shapes of the size of 5-100 nm, and their purities differ depending on collecting positions and filter types, and the maximum purity obtained is 72 wt% at the filter.

• 한국염색가공학회지
• /
• 제14권5호
• /
• pp.261-267
• /
• 2002

Cotton fabrics were immersed in aqueous solution of N-methylmorpholine N-oxide(NMMO) with various concentrations, padded by 300% of pick-up, concentrated at $90^\circ{C}$ for 30min under constant-length condition, washed, and dried, to examine a possibility of linen-like finishing by the solvent bonding between fibers. With increasing the concentration of NMMO, cross-sections of fibers changed to oval or polygonal shapes and not only the fibers but also the warp and weft were bonded each other, which produced linen-like effect on the fabrics in the aspects of appearance and mechanical properties such as the Increase of stiffness and shear properties. The thickness, moisture regain and dyeability were increased with the concentration of NMMO.

• International Journal of Ocean System Engineering
• /
• 제1권2호
• /
• pp.95-101
• /
• 2011

Perforated plates with cutouts (or holes) are widely used in structural members. These cutouts provide stress concentration in plates. Extensive studies have been carried out on stress concentration in perforated plates, which consider cutout shapes, boundary conditions, bluntness of cutouts, and more. This study presents stress concentration analyses of perforated plates with not only various cutouts and bluntness but also different cutout orientations. Especially, the effect of cutout orientation on stress concentration is emphasized since structural members have become more complicated recently. To obtain stress concentration patterns, a finite element program, ANSYS, is used. For the designated goal, three parameters are considered as follows: the shapes of polygonal cutouts (circle, triangle, and square), bluntness (a counter measure of radius ratio, r/R), and rotation of cutouts (${\theta}$). From the analyses, it is shown that, in general, as bluntness increases, the stress concentration increases, regardless of the shape and rotation. A more important finding is that the stress concentration increases as the cutouts become more oriented from the baseline, which is the positive horizontal axis (+x). This fact demonstrates that the orientation is also a relatively significant design factor to reduce stress concentration. In detail, in the case of the triangle cutout, orienting one side of the triangle cutout to be perpendicular to the applied tensile forces is preferable. Similarly, in the case of the square cutout, it is more advantageous to orient two sides of square cutout to be perpendicular to the applied tensile force. Therefore, at the design stage, determining the direction of a major tensile force is required. Then, by aligning those polygon cutouts properly, we can reduce stress concentration.

• 한국식품과학회지
• /
• 제24권5호
• /
• pp.477-481
• /
• 1992

품질이 좋은 된장을 제조하기 위한 연구의 일환으로 재래식 된장과 Aspergillus oryzae와 Bacillus natto를 혼합한 된장을 제조해서 발효기간에 따른 대두조직의 변화를 조사한 결과 가압, 가열처리에 의하여 세포벽이 붕괴되거나 ghost 상태를 보였고 표피부와 내부의 세포질은 원형질 분리가 현저한 차이가 있으며 protease에 의한 당단백 구상체의 융합과 amylase에 의하여 전분이 분해되어 작은 공포를 보였으며 발효에 의한 균침투 과정이 시일이 경과함에 따라 표피부에서 내부로 이행되어지며 Aspergillus oryzae와 Bacillus natto 혼합 된장의 표피부와 유세포에서 점질물이 보인다. 또한 발효시간이 경과함에 따라 염색성이 나빠지고 세포벽이 다각형으로 되는데 재래식 보다는 Aspergillus oryzae와 Bacillus natto 혼합구가 현저하였다.

• 한국정보과학회논문지:데이타베이스
• /
• 제30권4호
• /
• pp.362-371
• /
• 2003

이 논문에서는 이미지 데이타베이스에서 모양 특징 기반 이미지 분류와 인덱싱을 위해 객체의 윤곽선 특성을 고려해 임계값을 동적으로 결정하여 최적 우세점을 추출하는 알고리즘을 제안한다. 동적 임계값결정은 원본 모양의 윤곽선 길이 비와 근사화된 다각형의 둘레 길이 비를 알고리즘 수행시 점진적으로 검사하는 방법을 사용한다. 이 알고리즘은 윤곽선 특징을 반영하여 동적인 임계값 검사를 함으로써 의사점 수를 최대한 줄이며 최소 우세점만으로 모양 특징 정보를 추출할 수 있는 장점을 보인다. 제안한 방법은 객체의 윤곽선을 이루는 n개의 점에서 m개의 최적 우세점을 찾는데 평균 O(nlogn)이 걸린다. 최적화 평가는 7가지 서로 다른 특성을 가지는 70개의 합성 모양과 1,100개의 어류 모양에 대해 알고리즘을 적용하고 피 결과에 대해 평가 함수를 구성하여 수행하였다. 최적화율은 실험 모양들에 대해 평균0.92를 보였으며 기존 알고리즘에 대해 약 14% 최적화 성능 개선을 보였다. 제안한 알고리즘을 통해 추출한 모양 특징 정보는 정규화를 통해 이미지 분류와 인덱싱, 유사도 검색에 활용할 수 있다.

• 한국방사선학회논문지
• /
• 제17권2호
• /
• pp.223-230
• /
• 2023

본 연구는 전신 방사선 조사 후 적혈구의 형태적 변화를 고찰하고자 하였다. 혈액 시료는 방사선 조사한 랫드(Rat)와 마우스의 적혈구를 사용하였다. 투과전자현미경 관찰결과, 5 Gy 조사 후 20일 지난 적혈구에서 대소부동증이 관찰되었다. 작은 적혈구에서는 삼각형, 테트라포드형의 형태가 관찰되었다. 일반적 크기의 적혈구에는 변형적혈구, 낫 모양의 겸상적혈구, 유극적혈구 등이 관찰되었다. 7 Gy 조사 후 20일 지난 적혈구는 분열적혈구가 관찰되었다. 주사전자현미경 관찰결과, 작은 적혈구들과 함께 누적적혈구가 관찰되었다. 또한 적혈구들이 서로 엉킨 상태의 군집된 형태도 확인되었다. 그 외 다각형의 모양, 반달 모양의 변형된 형태도 관찰되었다. 결론적으로 방사선 피폭에 의한 적혈구 연구는 수적 변화보다 변형된 형태의 병적 연구가 더 중요한 것으로 판단된다.

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.70-76
• /
• 2017

To synthesize copper nanoparticle a thermal decomposition was adopted. And to solve the problem of surface oxidation of the synthesized copper powder an electroless Ag plating method was used. The size and shape of synthesized Cu nanoparticle were affected by the size of copper oxalate used as a precursor, reaction solvent, reaction temperature and amount of reducing agent. Especially reaction solvent is dominant factor to control shape of Cu nano-particle which can have the shapes of sphere, polygon and rod. In case of glycerol, it produced spherical shape of about 500 nm in size. Poly ethylene produced uniform polygonal shape in about 700 nm and ethylene glycol produced both of polygon and rod having size range between 500 and 1500 nm. The silver coated copper powder showed a high electrical conductivity.

• 한국주조공학회지
• /
• 제16권2호
• /
• pp.158-164
• /
• 1996

In copper continuous casting, the soot, which is the incomplete pyrolitic product of acetylene, has been used as a mold coat. In this work, under constant acetylene pressure, the characteristics of soot and the optimum condition of sooting were investigated with different acetylene and oxygen flow rate. The soot particles deposited on the mold surface had mainly spherical shape and their sizes were about 20nm. After reaction with melt, their shapes were changed into polygonal type due to the graphitization. With increasing oxygen flow rate up to $0.6{\ell}/min$, the amount of residues of soot after heat treatment were kept nearly constant. But the amount of residues increased rapidly with further increasing oxygen flow rate. Degree of graphitization was maximum at $0.4{\ell}/min$ and $5{\ell}/min$ of oxygen and acetylene flow rate, respectively.

• 한국염색가공학회지
• /
• 제22권1호
• /
• pp.51-60
• /
• 2010

This research works on the effects of drawing conditions on the physical properties of the drawn worsted yarns. The drawn worsted yarns were made by the yarn drawing system under various drawing conditions such as concentration of reducing agent, draw ratio, setting time of drawn yarn, and concentration of oxidizing agent. The drawn worsted yarns from 2/80Nm to 2/90Nm were obtained from 2/60Nm worsted yarns, the surface and cross-sectional shapes and tensile properties of these various specimens were measured and discussed with the various drawing conditions. The drawing of worsted yarn made constituent wool fiber scratched and made it changing to polygonal cross-sectional shape. The tenacity and modulus were increased with draw ratio and concentration of reducing agent. And tensile strain was increased with draw ratio, which decreased with concentration of reducing agent.