• Journal of Korean Neurosurgical Society
• /
• 제49권5호
• /
• pp.267-272
• /
• 2011

Objective : Although iliac crest autograft is the gold standard for lumbar fusion, the morbidity of donor site leads us to find an alternatives to replace autologous bone graft. Ceramic-based synthetic bone grafts such as hydroxyapatite (HA) and b-tricalcium phosphate (b-TCP) provide scaffolds similar to those of autologous bone, are plentiful and inexpensive, and are not associated with donor morbidity. The present report describes the use of Polybone$^{(R)}$ (Kyungwon Medical, Korea), a beta-tricalcium phosphate, for lumbar posterolateral fusion and assesses clinical and radiological efficacy as a graft material. Methods : This study retrospectively analyzed data from 32 patients (11 men, 21 women) who underwent posterolateral fusion (PLF) using PolyBone$^{(R)}$ from January to August, 2008. Back and leg pain were assessed using a Numeric Rating Scale (NRS), and clinical outcome was assessed using the Oswestry Disability Index (ODI). Serial radiological X-ray follow up were done at 1, 3, 6 12 month. A computed tomography (CT) scan was done in 12 month. Radiological fusion was assessed using simple anterior-posterior (AP) X-rays and computed tomography (CT). The changes of radiodensity of fusion mass showed on the X-ray image were analyzed into 4 stages to assess PLF status. Results : The mean NRS scores for leg pain and back pain decreased over 12 months postoperatively, from 8.0 to 1.0 and from 6.7 to 1.7, respectively. The mean ODI score also decreased from 60.5 to 17.7. X-rays and CT showed that 25 cases had stage IV fusion bridges at 12 months postoperatively (83.3% success). The radiodensity of fusion mass on X-ray AP image significantly changed at 1 and 6 months. Conclusion: The present results indicate that the use of a mixture of local autologous bone and PolyBone$^{(R)}$ results in fusion rates comparable to those using autologous bone and has the advantage of reduced morbidity. In addition, the graft radiodensity ratio significantly changed at postoperative 1 and 6 months, possibly reflecting the inflammatory response and stabilization.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.120-127
• /
• 2005

Conventional poly(methyl methacrylate) (PMMA) bone cement has been widely used as an useful biopolymeric material to fix bone using artificial prostheses. However, many patients had to be reoperated, due to the poor mechanical and thermal properties of conventional PMMA bone cement, which are derived from the presence of unreacted MMA liquid, the shrinkage and bubble formation that occur during the curing process of the bone cement, and the high curing temperature ($above 100^{\circ}C$) which has to be used. In the present study, a composite PMMA bone cement was prepared by impregnating conventional PMMA bone cement with ultra high molecular weight polyethylene (UHMWPE) powder, in order to improve its mechanical and thermal properties. The UHMWPE powder has poor adhesion with other biopolymeric materials due to the inertness of the powder surface. Therefore, the surface of the UHMWPE powder was modified with two kinds of silane coupling agent containing amino groups (3-amino propyltriethoxysilane ($TSL 8331^{R}$) and N-(2-aminoethyl)-3-(amino propyltrimethoxysilane) ($TSL 8340^{R}$)), in order to improve its bonding strength with the conventional PMMA bone cement. The tensile strengths of the composite PMMA bone cements containing $3 wt\%$ of the UHMWPE powder surface-modified with various ratios of $TSL 8331^{R}$ and $TSL 8340^{R}$ were similar or a little higher than that of the conventional PMMA bone cement. However, no significant difference in the tensile strengths between the conventional PMMA bone cement and the composite PMMA bone cements could be found. However, the curing temperatures of the composite PMMA bone cements were significantly decreased.

• IMMUNE NETWORK
• /
• 제11권5호
• /
• pp.281-287
• /
• 2011

Background: Biodegradable polymers have increasingly been recognized for various biological applications in recent years. Here we examined the immunostimulatory activities of the novel poly(aspartic acid) conjugated with L-lysine (PLA). Methods: PLA was synthesized by conjugating L-lysine to aspartic acid polymer. PLA-nanoliposomes (PLA-NLs) were prepared from PLA using a microfluidizer. The immunostimulatory activities of PLA-NLs were examined in mouse bone marrow-derived dendritic cells (BM-DCs). Results: PLA-NLs increased the number of BM-DCs when added to cultures of GM-CSF-induced DC generation on day 4 after the initiation of cultures. Examination of the phenotypic properties showed that BM-DCs generated in the presence of PLA-NLs are more mature in terms of the expression of MHC class II molecules and major co-stimulatory molecules than BM-DCs generated in the absence of PLA-NLs. In addition, the BM-DCs exhibited enhanced capability to produce cytokines, such as IL-6, IL-12, TNF-${\alpha}$ and IL-$1{\beta}$. Allogeneic mixed lymphocyte reactions also confirmed that the BMDCs were more stimulatory on allogeneic T cells. PLA- NL also induced further growth of immature BM-DCs that were harvested on day 8. Conclusion: These results show that PLA-NLs induce the generation and functional activities of BM-DCs, and suggest that PLA-NLs could be immunostimulating agents that target DCs.

• Macromolecular Research
• /
• 제17권7호
• /
• pp.516-521
• /
• 2009

Techflex$^{(R)}$, a polypropylene-lined, multilayer infusion bag, was studied for its compatibility with diazepam, in comparison to the conventional infusion bag, Safeflex$^{(R)}$, which is comprised of poly(vinyl chloride) (PVC). Diazepam was diluted in 0.9% sodium chloride isotonic solution and stored in the infusion bags for 24 h. To evaluate the sorption of diazepam into the infusion bags during storage, the concentration of the drug remaining in the bag was measured using gas chromatography-mass spectroscopy. The PVC bags exhibited a marked sorption of diazepam, with a drug loss reaching up to 90% of the initial concentration after 24 h of contact, whereas Techflex$^{(R)}$ inhibited the drug sorption, showing approximately 10%, under the same conditions. The differences in the sorption behaviors of the bags are discussed in terms of solubility parameters and crystallinities of the polymers.

• 한국식품영양과학회지
• /
• 제35권3호
• /
• pp.255-261
• /
• 2006

칼슘은 한국인에게 가장 부족되기 쉬운 영양소로 섭취만큼이나 흡수가 중요한 요인이 되는 미네랄이다. 최근 칼슘흡수 증진에 효과가 있는 소재로 주목받고 있는 폴리 감마글루탐산(${\gamma}-PGA;\;poly-{\gamma}-glutamic\;acid)$이 체내 칼슘흡수에 미치는 영향을 알아보기 위해 4주령된 수컷 흰쥐(Sprague Dawley, female rats)를 이용하여 3주간 칼슘결핍식이를 급여시켜 칼슘결핍을 유도 후에, ${\gamma}-PGA$ 보충식이를 4주간 급여하였다. 실험군은 칼슘결핍군(Ca free group), 칼슘보충군(칼슘1.2% 보충군, total Ca 0.45%), 칼슘과 CPPl% 보충군(칼슘1.2%+CPP1% 보충군), 칼슘과 PGA1% 보충군(칼슘1.2%+${\gamma}-PGA1%$ 보충군), 칼슘과 CP1%+PGA1% 보충군(칼슘1.2%+CPP1%+${\gamma}-PGA1%$ 보충군), 칼슘과 PGA3% 보충군(칼슘1.2%+$\gamma$-PGA3% 보충군)으로 구분하였다. 이때 ${\gamma}-PGA$의 효과를 검증하기 위해 ${\gamma}-PGA$와 칼슘흡수 기전이 유사하고 이미 효능이 알려져 있는 casein phosphopeptide 보충군을 실험군에 추가하였다. 식이섭취량은 칼슘결핍군이 다소 낮았으나 유의적인 차이는 없었으며 칼슘섭취량도 유의적 차이 없이 비슷한 수준을 보였다. 변 및 뇨중 칼슘 배설량은 칼슘만을 섭취한 대조군에 비해 ${\gamma}-PGA$보충군에서 유의적으로 낮았다(p<0.05). 칼슘흡수율 또한 그룹간의 유의적 차이를 보여 칼슘만을 섭취한 그룹에 비해 ${\gamma}-PGA$를 함께 보충한 그룹의 흡수율이 30%더 높은 경향을 보였으며 이는 이미 효능이 알려진 CPP보다 우수한 수준이었다. 골형성 지표인 혈중 ALP를 측정한 결과 대조군에 비해 ${\gamma}-PGA$보충군이 유의적으로(p<0.05) 낮았고, 혈중 칼슘농도는 항상성을 유지하며 그룹간의 유의적 차이 없이 비슷한 수준을 보였으며 , OHPr/Cre도 유의적 차이는 없었다. 뼈 중 칼슘함량 및 강도는 칼슘결핍군이 나머지군에 비해 유의하게(p<0.03) 낮았으며, 칼슘함량의 경우 칼슘만을 보충한 그룹에 비해 ${\gamma}-PGA$를 함께 보충한 그룹이 농도 의존적으로 높은 칼슘함량을 보였고(p<0.05), 골강도의 경우는 유의적 차이는 없었으나 ${\gamma}-PGA$를 함께 보충한 그룹이 농도 의존적으로 골강도가 높은 경향을 나타내었다. 결론적으로 칼슘결핍을 유발한 흰쥐 에 칼슘만을 보충시켰을 때보다 칼슘과 함께 ${\gamma}-PGA$를 함께 보충했을 경우, 칼슘흡수 증진 및 골대사에 긍정적으로 기여함을 확인할 수 있었다. 그러나 좀 더 명확한 효과 검증을 위해서는 차후 많은 개체수와 장기간의 식이를 통한 반복실험, ${\gamma}-PGA$섭취수준에 따른 추가실험이 진행되어야 할 것으로 생각된다.

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.47-60
• /
• 1988

N-n-Propylacrylamide는 n-propyl bromide와 acrylamide로 부터 합성하였고, 합성된 N-n-propylacrylamide를 THF용매속에서 개시제로 AIBN을 사용하여 $60^{\circ}C$에서 acrylamide와 공중합시켰다. 그리고 합성된 단량체와 공중합체는 NMR과 IR에 의하여 확인하였다.

• Macromolecular Research
• /
• 제11권1호
• /
• pp.14-18
• /
• 2003

Grafting of glycidyl methacrylate (GMA) upon coralline hydroxyapatite in conjugation with demineralized bone matrix (CHA-DBM) using equal molar ratio of potassium persulfate/sodium metabisulfite redox initiating system was investigated in aqueous medium. The optimum reaction condition was standardized by varying the concentrations of backbone, monomer, initiator, temperature and time. The results obtained imply that the percent grafting was found to increase initially and then decrease in most of the cases. The optimum temperature and time were found to be 50 $^{\circ}C$ and 180 min, respectively, to obtain higher grafting yield. Fourier transform infrared (FT-IR) spectroscopy and X-ray powder diffraction (XRD) method were employed for the proof of grafting. The FT-IR spectrum of grafted CHA-DBM showed epoxy groups at 905 and 853 $cm^{-1}$ / and ester carbonyl group at 1731 $cm^{-1}$ / of poly(glycidyl methacrylate) (PGMA) in addition to the characteristic absorptions of CHA-DBM, which provides evidence of the grafting. The XRD results clearly indicated that the crystallographic structure of the grafted CHA-DBM has not changed due to the grafting reaction. Further, no phase transformation was detected by the XRD analysis, which suggests that the PGMA is grafted only on the surface of CHA-DBM backbone. The grafted CHA-DBM will have better functionality because of their surface modification and hence they may be more useful in coupling of therapeutic agents through epoxy groups apart from being used as osteogenic material.

• 한국식품영양과학회지
• /
• 제37권12호
• /
• pp.1576-1582
• /
• 2008

기존 칼슘보충용식품의 성장촉진효능을 증진시키기 위하여 칼슘흡수 관여 물질인 $\gamma$-PGA를 다량 생산하는 Bacillus subtilis SE4 균주를 선발하였다. 선발된 B. subtilis SE4의 발효대사물을 기존 칼슘보충용식품에 첨가하여 성장기 수컷 흰쥐에 28일간 경구투여 한 결과 발효대사물이 첨가된 신규칼슘보충용식품군에서 혈청 내 IGF-I 함량이 대조군이나 기존칼슘보충용식품군에 비해 유의적으로 높게 나타났다(p<0.05). 일일증체량, 일일사료섭취량, 장골길이, 장골 무게, 장골폭 등의 성장관련 지표에서도 장골의 길이와 일부 부위별 두께에서의 유의적 결과를 포함하여 전반적으로 신규칼슘보충용식품군이 대조군과 기존칼슘보충용식품군에 비해 양호한 성적을 나타내었다. 이러한 결과는 기존칼슘 보충용 식품에 발효대사물을 첨가함으로써 나타난 칼슘의 생체흡수율 증대 및 성장호르몬의 분비활성화 등 여러 성장 관련요인들이 흰쥐 성장에 긍정적으로 작용한 때문으로 생각되어진다.

• 산업식품공학
• /
• 제21권3호
• /
• pp.233-241
• /
• 2017

Scaffolds of cell substrates are biophysical platforms for cell attachment, proliferation, and differentiation. They ultimately play a leading-edge role in the regeneration of tissues. Recent studies have shown the potential of bioactive scaffolds (i.e., osteo-inductive) through 3D printing. In this study, rice bran-derived biocomposite was fabricated for fused deposition modeling (FDM)-based 3D printing as a potential bone-graft analogue. Rice bran by-product was blended with poly caprolactone (PCL), a synthetic commercial biodegradable polymer. An extruder with extrusion process molding was adopted to manufacture the newly blended "green material." Processing conditions affected the performance of these blends. Bio-filament composite was characterized using field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDX). Mechanical characterization of bio-filament composite was carried out to determine stress-strain and compressive strength. Biological behaviors of bio-filament composites were also investigated by assessing cell cytotoxicity and water contact angle. EDX results of bio-filament composites indicated the presence of organic compounds. These bio-filament composites were found to have higher tensile strength than conventional PCL filament. They exhibited positive response in cytotoxicity. Biological analysis revealed better compatibility of r-PCL with rice bran. Such rice bran blended bio-filament composite was found to have higher elongation and strength compared to control PCL.