• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.403-406
• /
• 1999

The influence of temperature variation (25～125$^{\circ}C$) on poly-Si thin-film transistors (TFT's) was investigated by examining the electrical properties change of poly-Si films formed by solid phase crystallization (SPC). The n-channel poly-Si TFT's fabricated by SPC with channel length of 1.5 and loon ,respectively, exhibit good characteristics with a high ${\mu}$$\sub$FE/ ($\geq$82 and $\geq$60$\textrm{cm}^2$/V-s in 1.5 and 10$\mu\textrm{m}$, respectively), low V$\sub$t/, ($\leq$1.52 and $\leq$ 2.75V in 1.5 and 10$\mu\textrm{m}$, respectively), low S$\sub$t/, and good ON-OFF characteristics in spite of temperature variation. Thus, poly-Si films formed by SPC can be applied for the application to poly-Si TFT liquid crystal display with peripheral integrated circuits.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.60-61
• /
• 2007

In this paper, the p-channel poly Si thin-film transistors (Poly-Si TFT's) using formed by solid phase crystallization (SPC) on glass substrate were fabricated. And we propose an ONO(Oxide-Nitride-Oxide) multilayer as the gate insulator for poly-Si TFT's to indicate non-volatile memory (NVM) effect. Poly-Si TFT is investigated by measuring the electrical properties of poly-Si films, such as I-V characteristics, on/off current ratio. NVM characteristics is showed by measuring the threshold voltage change of TFT through I-V characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.173-176
• /
• 2005

Teijin사의 HT100-B60의 폴리카보네이트(polycarbonate) $100{\mu}m$, I-Component사의 PES(polyethersulfone) $200{\mu}m$, Ferrania사의 PAR(polyacrylate) $100{\mu}m$와 $200{\mu}m$를 사용하였다 열팽창계수의 차이로 인해 공정상 기판의 가열과 냉각시 열응력이 발생하여 기판의 크랙발생의 원인이 된다. 이를 최소화하기 위해 모든 공정이 시작하기 전에 pre-annealing을 통해 plastic 기판의 시간별 공정을 실시하였다. plastic film의 annealing time은 0h, 12h, 24, 40h, 50h, 60h, 70h, 80h으로 사간을 달리하여 오븐 안의 진공상태를 조성하여 실험하였다. Thermal evaporator로 Al을 약 170nm 증착하였으며 (주)동진 세미캠의 DTFR-1011s DR LCD용 감광액을 Spin Coating Spread(500rpm/6sec), Spin(3000rpm/20sec)으로 coating하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.470-470
• /
• 2013

Recently, active materials such as amorphous silicon (a-Si), poly crystalline silicon (poly-Si), transition metal oxide semiconductors (TMO), and organic semiconductors have been demonstrated for flexible electronics. In order to apply flexible devices on the polymer substrates, all layers should require the characteristic of flexibility as well as the low temperature process. Especially, pentacene thin film transistors (TFTs) have been investigated for probable use in low-cost, large-area, flexible electronic applications such as radio frequency identification (RFID) tags, smart cards, display backplane driver circuits, and sensors. Since pentacene TFTs were studied, their electrical characteristics with varying single variable such as strain, humidity, and temperature have been reported by various groups, which must preferentially be performed in the flexible electronics. For example, the channel mobility of pentacene organic TFTs mainly led to change in device performance under mechanical deformation. While some electrical characteristics like carrier mobility and concentration of organic TFTs were significantly changed at the different temperature. However, there is no study concerning multivariable. Devices actually worked in many different kinds of the environment such as thermal, light, mechanical bending, humidity and various gases. For commercialization, not fewer than two variables of mechanism analysis have to be investigated. Analyzing the phenomenon of shifted characteristics under the change of multivariable may be able to be the importance with developing improved dielectric and encapsulation layer materials. In this study, we have fabricated flexible pentacene TFTs on polymer substrates and observed electrical characteristics of pentacene TFTs exposed to tensile and compressive strains at the different values of temperature like room temperature (RT), 40, 50, $60^{\circ}C$. Effects of bending and heating on the device performance of pentacene TFT will be discussed in detail.