• Journal of Powder Materials
• /
• v.11 no.3
• /
• pp.217-223
• /
• 2004

Submicron nickel powders were prepared from aqueous solution under hydrothermal condition. The experimental conditions including the types of protective agents, concentration of the solution and the pH were studied in detail. Starting concentration of nickel ion is a dominant factor affecting particle size. It was shown that the subsequent addition of Poly Vinyl Pyrrolidone(PVP) and Sodium Dodecyle Sulfate(SDS) can help to disperse the nickel powder. X-ray diffraction and SEM were employed to characterize the products.

• Macromolecular Research
• /
• v.17 no.11
• /
• pp.907-911
• /
• 2009

To improve the moisture stability of the $CaS:Eu^{2+}$ red phosphor, surface coatings with silica nanoparticles were performed using five different methods, i.e., $P_1$, $P_2$, $P_3$, $P_4$, and $P_5$. The phosphors were coated with silica nanoparticles using a dip coating method ($P_1$) and sol-gel method ($P_2$). The phosphors were coated using a solution containing silica nanoparticles and poly(1-vinyl-2-pyrrolidone), PVP, $(P_3$). The phosphors were also coated with silica nanoparticles by reacting with the 1-vinyl-2-pyrrolidone (VP) monomer ($P_4$) or by reacting with mixtures containing VP and tetraethylorthosilicate ($P_5$). A decrease in the photoluminescence (PL) intensity was observed regardless of the coating methods. However, the moisture stability of the phosphors was enhanced by the coating when aged in a temperature-controlled humidity chamber. Among these methods, the $P_4$ (or $P_5$) method exhibited the greatest increase in moisture stability of the phosphors. The coated phosphors showed a relatively constant intensity with aging time, whereas the uncoated phosphor showed a decrease.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1345-1348
• /
• 2010

Highly monodisperse polystyrene (PS) nanospheres were fabricated by surfactant-free emulsion polymerization in water using styrene, 2,2'-azobis(2-methyl propionamidine) dihydrochloride (AIBA), and poly(vinyl pyrrolidone) (PVP). The size and distribution of the PS nanospheres were systematically investigated in terms of initiator concentration, stabilizer concentration, reaction temperature, reaction time, and reactant concentration. With increasing AIBA initiator concentration, PS particle sizes are raised proportionally, and can be controlled from 120 to 380 nm. Particle sizes were reduced with increasing PVP concentration. This decrease occurs because a high PVP concentration leads to a large number of primary nuclei in the early stage of polymerization. When the reaction temperature increased, the sizes of the PS particles decrease slightly. The particles grew quickly during the initial reaction stage (1-3 h) and the growth rate became steady-state after 6 h. The PS sizes approximately doubled when the reactant (styrene, PVP, azo-initiator) concentrations were increased by a factor of eight.

• Journal of Powder Materials
• /
• v.13 no.2 s.55
• /
• pp.138-143
• /
• 2006

In this study, the effects of the dispersants, i.e., Hypermer KD-2 and poly(l-vinyl-2-pyrrolidone) (PVP), and their concentration on the dispersion stability of Ni nanoparticles ($10nm{\sim}40nm$) in ethanol were investigated by using a visual inspection, a transmission profile (Turbiscan), and a zeta potential measurement. The transmission profiles measured by Turbiscan showed that the particle size increased over the entire height of the sample for suspensions with both the dispersants without showing any particle coalescence and sedimentation. The visual inspection also confirmed that the Ni suspensions with Hypermer KD-2 and PVP were very stable for more than a year. The zeta potential values varied from positive to negative with increasing the dispersant's concentration. The dispersion stability of the suspensions was not affected by both the dispersant's concentration and the zeta potential values. The observed suspension stability of Ni nanoparticles was attributed to the steric effect for the Hypermer KD-2 and to the bridging effect for the PVP.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.390-390
• /
• 2014

Soft-lithography 기술 중의 하나인 Micro-Contact Printing (${\mu}$-CP) 기술은 패턴이 형성된 mold 위에 고분자 물질을 코팅하고 기판과 접촉시켜, 패턴 된 부분만 기판으로 전사시켜 패턴을 형성하는 방법이다. ${\mu}$-CP 기술은 Imprint 방식과 비교하여 잔여물을 제거하기 위한 ashing 공정이 필요 없으며, 상대적으로 패턴이 전사되기 위한 공정 온도와 압력이 낮은 장점이 있다. 한편, 기존의 Photolithography 기술로 유기기판에 패턴을 형성하는 것은 제한이 있으며, 자외선에 의해 유기기판의 특성이 변화될 수 있다. 또한 패턴 형성 후 고분자 패턴을 제거하는 용매가 기판이 손상 받게 된다. 본 실험에서는 poly (1H,1H,2H,2H-perfluorodecyl methacrylate) polymer (PFDMA) films을 패턴 된 poly (dimethylsiloxane) (PDMS) mold 위에 코팅하고 ${\mu}$-CP 기술을 통해 poly (methylmethacrylate) (PMMA), poly (vinyl pyrrolidone) (PVP)등과 같은 유기기판 위에 고분자 패턴 형성을 하였다. 이때 전사 가능한 온도는 상온이며, 압력은 코팅된 PFDMA films이 기판과 접촉될 수 있는 정도만 필요하다. PFDMA가 상온에서 전사 가능한 이유는 유리전이온도가 상온보다 낮기 때문이다. 또한 접촉각을 측정하여 접착력을 계산하면 PFDMA와 기판과의 접착력이 상대적으로 높기 때문이다. PFDMA는 플루오르계 용매에 제거되기 때문에 유기기판의 손상을 최소화 할 수 있다. ${\mu}$-CP 기술을 이용한 PFDMA의 패턴 형성 방법은 물질의 특성으로 flexible 및 organic device 제작에 응용 될 수 있다.

• Macromolecular Research
• /
• v.10 no.5
• /
• pp.253-258
• /
• 2002

The multi-wall carbon nanotubes (MWNTs) with graphite crystal structure were synthesized by the catalytic decomposition of a ferrocene-xylene mixture in a quartz tube reactor to use as the conductive filler in the binary polymer matrix composed of poly(vinylidene fluoride) (PVdF) and poly(vinyl pyrrolidone) (PVP) for the EMI (electromagnetic interference) shielding applications. The yield of MWNTS was significantly dependent on the reaction temperature and the mole ratio of ferrocene to xylene, approaching to the maximum at 800 $^{\circ}C$ and 0.065 mole ratio. The electrical conductivity of the MWNTs-filled PVdF/PVP composite proportionally depended on the mass ratio of MWNTs to the binary polymer matrix, enhancing significantly from 0.56 to 26.7 S/cm with the raise of the mass ratio of MWNTs from 0.1 to 0.4. Based on the higher electrical conductivity and better EMI shielding effectiveness than the carbon nanofibers (CNFs)-filled coating materials, the MWNTs-filled binary polymer matrix showed a prospective possibility to apply to the EMI shielding materials. Moreover, the good adhesive strength confirmed that the binary polymer matrix could be used for improving the plastic properties of the EMI shielding materials.

• Journal of Radiation Industry
• /
• v.4 no.1
• /
• pp.73-77
• /
• 2010

In recent day, there is much interest in the biocidal activity of silver since silver is known to be safe and effective as disinifectant and biocidal material against coliforms and viruses. In this study, hydrogels containing silver acetate as antibacterial agent have been prepared using gamma rays irradiation. The hydrogels are composed of poly(vinyl pyrrolidone) (PVP), poly(ethylene glycol) (PEG), carrageenan and silver acetate. The concentration of solution was 9 wt%. The ratio of PVP : PEG : carrageenan was 6 : 1 : 2. The concentration of the silver acetate were 0, 0.01, 0.03, 0.05 and 0.07% and Gamma irradiation dose was 25 kGy. The Gamma irradiation dose in hydrogels with 0.01% silver acetate were 20 kGy, 35 kGy, 50 kGy, 65 kGy, and 80 kGy. The results showed that 0.01% silver acetate concentration of hydrogels by 25 kGy irradiation dose showed the highest antibacterial activity against E. coli and Staphylococcus aureus. Moreover, antibacterial activity of various Gamma irradiation dose in hydrogels treated 0.01% silver acetate showed highest 35 kGy irradiation dose against Staphylococcus aureus.

• Membrane Journal
• /
• v.16 no.4
• /
• pp.294-302
• /
• 2006

Silver polymer electrolytes are very promising membrane materials for the separation of olefin/paraffn mixtures. Olefin molecules are known to be transported through reversible complex formation with silver ions entrapped iii polymer matrix. However, they have poor long-term stability, which is very important fur the industrial application; the selectivity through the membrane decreases gradually with time mostly due to the reduction of silver ions ($Ag^+$) into silver nanoparticles ($Ag^0$). In this study, the stability of silver polymer electrolyte was investigated for poly(vinyl pyrrolidone) (PVP) and $AgBF_4$ system containing a surfactant, i.e. $C_{18}H_{35}(OCH_2CH_2)_{20}OH$ (Brij98) as a stabilizer. The reduction behavior of silver ions to silver nanoparticles in PVP was also investigated by atomic force microscopy (AFM) and UV-visible spectroscopy. It was found that the growth of silver nanoparticles was slower and selectivity of polymer electrolyte for propylene in propylene/propane was maintained longer time when Brij98 was added as a stabilizer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.399-402
• /
• 2009

폴리올프로세스에서 PVP(Poly Vinyl Pyrrolidone) 안정제와 $NaNO_3$ 첨가제를 통해 환원속도를 조절하여 6.8 nm의 나노 큐보옥타해드론을 합성하였다. 투과전자현미경을 통해 백금 나노입자의 격자구조를 관찰하였다. 전기화학적 측정방법을 통해 백금 큐보옥타해드론 촉매가 구형의 촉매보다 우수한 촉매 성능을 나타냄을 확인하였다. 순환전류법을 통해 백금 촉매의 역방향 픽과 순방향 픽의 비율이 더 높은 것을 관찰하였다. 이것은 백금 큐보옥타해드론 촉매가 반응중 생성되는 촉매독에 강하다는 것을 의미한다. 백금 큐보옥타해드론 촉매의 표면은 {111}면과 {100}면이 혼재하며 모서리가 많이 드러나 메탄올 산화반응에 더 우수한 촉매성능을 나타내는 것으로 사료된다. 백금 촉매의 모양을 조절함으로서 백금 촉매의 표면 구조를 조절하였으며 이를 통해 높은 전류밀도를 나타내는 우수한 촉매를 합성할 수 있었다. 또한 0 ~ 0.6 V(NHE) 영역에서 촉매의 안정성을 평가한 결과 더 높은 안정성을 나타냄을 확인하였다.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.307-307
• /
• 2006

The reduction behavior of silver ions to silver nanoparticles is an important research topic in polymer/silver salt complex membranes for facilitated olefin transport, because it has a significant effect on the long-term stability of membrane performance. In this study, the effects of solvent on the formation of silver nanoparticles and long-term membrane performance in polymer/silver salt complex membrane were investigated. This effect was assessed for the complexes of poly(N-vinyl pyrrolidone) $(PVP)/AgBF_{4}$ with the use of ionic liquid (IL), acetonitrile (ACN) and water as a solvent. Membrane performance test shows that long-term stability is strongly dependent on the kind of solvent and arranged: IL > ACN >> water.