• Korean Chemical Engineering Research
• /
• 제57권1호
• /
• pp.17-21
• /
• 2019

산화환원흐름전지(Redox Flow Battery, RFB)는 대용량 에너지 저장장치로 바나듐 산화환원흐름전지가 대표적인 RFB인데, V-RFB는 고가인 점이 문제다. 철-크롬 RFB는 저가의 활물질(철, 크롬)을 사용해 경제적인 점이 장점인데, 성능이 낮은 점이 해결해야 할 과제다. 낮은 성능의 한 원인이 활물질의 크로스오버인데, 본 연구에서 불소계막 대신 탄화수소계막인 sulfonated Poly (ether ether ketone) (sPEEK)막을 사용해 활물질 투과를 감소시키는 연구를 하였다. sPEEK막의 크롬 이온 투과도는 $1.8{\times}10^{-6}cm^2/min$으로 Nafion막에 비해 약 1/33으로 작아서 불소계막 대신 sPEEK막을 사용하면 높은 활물질 투과문제를 해결할 수 있음을 보였다. 철 이온의 sPEEK막 확산의 활성화 에너지도 24.9 kJ/mol으로 Nafion막의 약 66%로 작았다. 그리고 고분자막에 들어간 e-PTFE 지지체가 철-크롬 산화환원흐름전지(ICRFB)에서 활물질 투과도를 감소시킴을 보였다.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.183-187
• /
• 2007

The magnetron reactive ion etching (RIE) characteristics of polycrystalline (poly) 3C-SiC grown on $SiO_2$/Si substrate by APCVD were investigated. Poly 3C-SiC was etched by $CHF_3$ gas, which can form a polymer as a function of side wall protective layers, with additive $O_2$ and Ar gases. Especially, it was performed in magnetron RIE, which can etch SiC at lower ion energy than a commercial RIE system. Stable etching was achieved at 70 W and the poly 3C-SiC was undamaged. The etch rate could be controlled from $20\;{\AA}/min$ to $400\;{\AA}/min$ by the manipulation of gas flow rates, chamber pressure, RF power, and electrode gap. The best vertical structure was improved by the addition of 40 % $O_2$ and 16 % Ar with the $CHF_3$ reactive gas. Therefore, poly 3C-SiC etched by magnetron RIE can expect to be applied to M/NEMS applications.

• Journal of Pharmaceutical Investigation
• /
• 제34권6호
• /
• pp.491-497
• /
• 2004

We investigated some important factors which affect the transdermal flux of ketoprofen, a nonsteroidal anti-inflammatory agent, as a first step to provide some basic knowledge for the development of a iontophoretic transdermal patch system. Factors such as current density, polarity, buffer (HEPES) and electrolyte concentration and pH were studied using hairless mouse skin. The effect of poly(L-lysin), which is known to affect the electro-osmotic flow through skin, on flux was also studied. Passive flux was about $20\;{\mu}g/cm^2hr$ at pH 4.0, but was negligible at pH 7.4 where all ketoprofen molecules dissolved are ionized (ketoprofen pKa=5.94). At pH 4.0, application of anodal current increased the flux further above the passive level, however anodal flux at pH 7.4 was much smaller than passive flux at pH 4.0. The application of cathodal current at pH 4.0 increased the average flux to $30-40\;{\mu}g/cm^2hr$, depending on the current density applied. At pH 7.4, cathodal flux was only about $5\;{\mu}g/cm^2hr$. Decrease in buffer and electrolyte concentration increased this cathodal flux about 10 fold. However decrease in HEPES buffer concentration 100 fold did not affect the flux. Anodal flux of acetaminophen was much larger than cathodal flux, indicating that electroosmotic flow can be playing an important role in the flux. Poly(L-lysin) increased the cathodal flux at pH 7.4. These results provide some important insights into the mechanism of transdermal flux of ketoprofen and the role of electroosmotic flow.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.268-271
• /
• 2008

APU 연소기의 내부 혼합 특성을 연구하기 위하여 연소기 1/6 크기의 분할연소기를 제작하였다. 내부유동을 확인하기 위하여 연소기는 PC(Poly Carbonate)재질을 이용하였으며 실물연소기와 같은 크기와 형태로 설계/제작하였다. 제작성 및 내부유동 관찰을 용이하게 하기 위하여 3차원 연소기를 2차원화 하여 제작하였으며, 엔진의 공기유동과 유사한 조건을 모사하기 위하여 Turbo Blower 및 유량을 조정하기 위한 밸브를 설치하였다. Blower 최대 유량은 7 $m^3$/min이며 연소기 입구속도가 연소기와 같은 100 m/s 까지 가능하도록 제작되었다.

• Journal of Pharmaceutical Investigation
• /
• 제33권1호
• /
• pp.15-19
• /
• 2003

The rheological behavior of poloxamer 407 solution as function of concentration and temperature was evaluated by rotational viscometer. The viscosity of poloxamer 407 solution was increased as the concentration of poloxamer 407 and temperature increased. At $4^{\circ}C$, poloxamer 407 solution showed the Newtonian flow characteristics regardless of concentration. Upon increasing temperature the poloxamer solution changed to the pseudoplastic flow pattern. And at gelation temperature, rheological profiles showed the abrupt increase in viscosity. Gelation temperature was decreased as the concentration of poloxamer 407 increased, while it increased as the concentration of poly(ethylene glycol) 4000 increased. Poly(ethylene glycol) might be expected to reduce the driving force for hydrophobic interaction resulting in slow gelation. From the viscoelastic properties of poloxamer gel system, we obtained the storage and loss modulus depending on the shear stress and frequency. And the sol-gel transition temperature was also obtained from the viscoelastic properties of poloxamer 407 gel.

• KSBB Journal
• /
• 제26권1호
• /
• pp.69-77
• /
• 2011

In this study, poly (L-lactic acid) (PLLA) microparticles containing gemcitabine hydrochloride were prepared by a supercritical fluid process, called aerosol solvent extraction system (ASES), utilizing supercritical carbon dioxide as antisolvent. The influence of process parameters such as temperature, pressure, $CO_2$ and solution flow rate, solution concentration, and feed ratio of drug to polymer on the morphology and characteristics of the microparticles was studied in detail. The gemcitabine-loaded microparticles exhibited a spherical shape with a smooth surface. The entrapment efficiency of gemcitabine increased with increasing temperature, solution concentration and $CO_2$ flow rate and with decreasing drug/polymer feed ratio. The maximum drug loading obtained from the ASES process was found to be about 11%. The ASES-processed PLLA microparticles containing gemcitabine showed a relatively high initial burst due to the presence of surface pores on the microparticles and the poor affinity between drug and polymer.

• Korean Chemical Engineering Research
• /
• 제44권5호
• /
• pp.513-519
• /
• 2006

본 연구에서는 유리(glass)와 석영(quartz)을 재질로 사용하여 MEMS(micro-electro mechanical systems) 공정을 통해 전기영동(electrophoresis)을 위한 microchip을 제작하였다. UV 광이 실리콘(silicon)을 투과하지 못하는 점에 착안하여, 다결정 실리콘(polycrystalline Si, poly-Si) 층을 채널 이외의 부분에 증착시킨 광 차단판(optical slit)에 의해 채널에만 집중된 UV 광의 신호/잡음비(signal-to-noise ratio: S/N ratio)를 크게 향상시켰다. Glass chip에서는 증착된 poly-Si 층이 식각 마스크(etch mask)의 역할을 하는 동시에 접합표면을 적절히 형성하여 양극 접합(anodic bonding)을 가능케 하 였다. Quartz 웨이퍼에 비해 불순물을 많이 포함하는 glass 웨이퍼에서는 표면이 거친 채널 내부를 형성하게 되어 시료용액의 미세한 흐름에 영향을 미치게 된다. 이에 따라, HF와 $NH_4F$ 용액에 의한 혼합 식각액(etchant)을 도입하여 표면 거칠기를 감소시켰다. 두 종류의 재질로 제작된 채널의 형태와 크기를 관찰하였고, microchip electrophoresis에 적용한 결과, quartz과 glass chip의 전기삼투 흐름속도(electroosmotic flow velocity)가 0.5와 0.36 mm/s로 측정되었다. Poly-Si 층에 의한 광 차단판의 존재에 의해, peak의 S/N ratio는 quartz chip이 약 2배 수준, glass chip이 약 3배 수준으로 향상되었고, UV 최대흡광 감도는 각각 약 1.6배 및 1.7배 정도 증가하였다.

• 대한화학회지
• /
• 제17권1호
• /
• pp.40-46
• /
• 1973

Nylon 6 의 후중합 반응을 질소흐름, 밀봉 및 감압의 세조건하에서 행하였다. 각 조건에 있어서 점도와 중합물의 감량은 반응온도 및 반응시간에 따라 증가하였고, 같은 반응온도에서의 점도는 감압, 밀봉, 질소흐름의 순서로 증가하였다. 후중합의 activation energy는 10.5kcal/mole로 계산되었다

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.234-235
• /
• 2008

The surface flatness of heteroepitaxially grown 3C-SiC thin films is a key factor affecting electronic and mechanical device applications. This paper describes the surface flatness of poly(polycrystalline) 3C-SiC thin films according to Ar flow rates and the geometric structures of reaction tube, respectively. The poly 3C-SiC thin film was deposited by APCVD (Atmospheric pressure chemical vapor deposition) at $1200^{\circ}C$ using HMDS (Hexamethyildisilane : $Si_2(CH_3)_6)$ as single precursor, and 1~10 slm Ar as the main flow gas. According to the increase of main carrier gas, surface fringes and flatness are improved. It shows the distribution of thickness is formed uniformly.

• 대한화학회지
• /
• 제39권8호
• /
• pp.604-610
• /
• 1995

3, 3'-Dipropyl oxacarbocyanine(DPC)와 poly(styrenesulfonate)(PSS)의 상호작용효과를 흡수 및 형광 분광학적 방법으로 연구하였으며, 이들 효과는 stacking model로 설명 되었다. DPC와 PSS 계의 상호작용에 대한 반응속도론적 고찰을 흡수 및 형광 정지흐름법에 의하여 연구하였다. DPP-PSS계의 이완효과는 두개의 이완과정을 가정함으로써 정량적으로 설명할 수 있었다. 또한 염효과에 의한 이완시간의 변화를 고찰하여 DPC-PSS계의 회합반응 메카니즘이 두 단계로 일어남을 설명할 수 있었다.