• 제목/요약/키워드: Poly I:C

검색결과 331건 처리시간 0.027초

활성화 폴리에틸렌/왁스/아크릴 공중합체의 블렌드에 의한 내구유연발수제의 제조에 관한 연구(I) (Preparation of Durable Softening Water Repellents by Blends of Activated Polyethylene/Wax/Acrylic Copolymer(I))

  • 신재현;김성계;박홍수
    • 한국응용과학기술학회지
    • /
    • 제13권1호
    • /
    • pp.41-46
    • /
    • 1996
  • Durable softening water repellents such as PODCWs were prepared by blending cationized compound of poly(octadecyl methacrylate-co-2-diethylaminoethyl methacrylate), of which synthetic methods were reported in the previous paper, activated polythylene, waxes, and emulsifiers. Water repellency of prepared PODCWs was measured by performing water repellent finish to various fabrics, PODCWs showed a good water repellency for P/C blended fabrics and their repelling tendency was in the order of P/C blended fabrics>cotton fabrics>nylon taffeta. The initial water repellencies of PODCW-1 and PODCW-2 were 100 and $100^{-}$ points, respectively, for P/C blended fabrics. And also, PODCW-1 and PODCW-2 were confirmed as durable water repellents with the results of making little difference of water repellency as ${\pm}5$ point after and before washing.

효율높은 cloning system을 통한 Rat Liver 전장 낙산탈수소효소 A-cDNA의 제조 및 분리동정 (Rapid and Efficient Molecular Cloning of Rat Liver Full-length LDH A-cDNA)

  • 노옥경;배석철;이승기
    • 약학회지
    • /
    • 제31권2호
    • /
    • pp.116-125
    • /
    • 1987
  • It is still difficult and time consuming to obtain cDNA sequences that contain the entire nucleotide sequence of the corresponding mRNA. A rapid and high efficient cloning method to obtain full-length cDNA segments is thus developed. The cloning procedure described here consists of the construction of oligo(dT)-tailed vector primer using pWR34 plasmid, polyadenylation of mRNA-cDNA heteroduplex using terminal deoxytransferase, and replacement of MRNA strand with DNA by RNase H and DNA polymerase I. The restriction endonuclease analysis shows that the size of inserted-cDNA is in the range of 1.5~4.0 kb long suggesting that most of cloned cDNA are full-length or nearly full-length cDNA. The plasmid-DNA recombinants obtained were 4$\times$$10^5$~$10^{6}$ per $\mu\textrm{g}$ of rat liver poly (A$^+$)mRNA, which is 4 to 10 fold higher cloning efficiency in comparison to the presently used methods for full-length cDNA cloning. The results indicate that the described cloning system is much simpler, less time consuming, and very efficient cloning method to construct a cDNA library.

  • PDF

중간주파수에서 위상이동 변화와 Langmuir흡착등온식 사이의 관계 (The Relation between the Phase-Shift Profile for the Intermediate Frequencies and the Langmuir Adsorption Isotherm)

  • 천장호;문경현;조종덕
    • 전기화학회지
    • /
    • 제3권1호
    • /
    • pp.25-30
    • /
    • 2000
  • 다결정 Pt/0.1 M $H_2SO_4$수성 전해질 계면에서 중간주파수 구간의 위상이동 변화와 Langmuir흡착등온식 사이의 관계를 교류임피던스 방법 즉 위상이동 방법을 이용하여 연구 조사하였다. 제안된 계면등가회로는 전해질저항($R_S$), Faraday저항$(R_F)$, 흡착유사용량$(C_\varphi)$의 등가회로 요소($C_P$)의 직렬접속으로 구성된다 지연되는 위상이동$(\varphi)$은 음전위(E) 및 주파수(f)에 따르며, $\varphi=-tan^{-1}[1/2{\pi}f(R_s+R_F)C_p]$이다. 중간주파수(6Hz)에서 위상이동 변화$(\varphi\;vs.\;E)$는 Langmuir흡착등온식$(\theta\;vs.\;E)$의 결정에 적용할 수 있는 실험적인 방법이다. 다결정 $Pt/0.1\;M\;H_2SO_4$ 전해질 계면에서 수소의 흡착평형 상수(K)와 흡착표준자유에너지$({\Delta}G_{ads})$는 각각 $1.8\times10^{-4}$와 21.4kJ/mol이며 과전위 수소흡착(OPD H)에 기인한다.

The Studies of Copolymer, Poly (3-hydroxybutyrate-co-3-hydroxy valerate) Synthesis in Recombinant pha+ Escherichia coli

  • Lee, Ha-Young;Rhie, Ho-Gun
    • 한국동물학회:학술대회논문집
    • /
    • 한국동물학회 1996년도 한국생물과학협회 국제학술대회
    • /
    • pp.195.2-195
    • /
    • 1996
  • acs gene cloning was constructed by subcloning the 2.2-kb MunI-MunI restriction fragment of 638 and 639 which include acs gene from the kohara phage into the unique EcoRI site of pUC18 and pJM9131 containing the PHA biosynthesis genes. Then recombinant E. coli fadRatoC(Con) mutants containing the polyhydroxyalkanoate(PHA) biosynthesis genes are able to incoporate s significant levels of 3-hydroxyvalerate (3HV) into the copolymer [P(3HB-co-3HV)]. Quantitative determination of PHB and P(3HB-co-3HV) was performed by gas-chromatographic analysis of extracts obtained from methanolysis of lyophilized cells.

  • PDF

Rheological Properties of the Solutions of Incompatible Polymer Blends

  • Sohn, Jeong-In;Ree, Taik-Yue
    • Bulletin of the Korean Chemical Society
    • /
    • 제2권4호
    • /
    • pp.142-147
    • /
    • 1981
  • A blend polymeric system composed of poly(methyl methacrylate) (PMMA or PM) and polystyrene (PS) dissolved in chloroform was rheologically studied. The viscosities ${\eta}_{bl}$ of the blend system with various blending ratios ${\chi}$ changing from zero (pure PS solution) to unity (pure PMMA solution) were measured at $25{\circ}C$ as a function of shear rates ${\dot{s}}$ by using a Couette type viscometer. ${\eta}_{bl}$ at a given ${\dot{s}}$ decreased exponentially with ${\chi}$ reaching asymptotic constant value of ${\eta}_{bl}$ ; ${\eta}_{bl}$ at a given ${\chi}$ is greater at a smaller ${\dot{s}}$. These results are explained by using Ree-Erying's theory of viscosity, ${\eta}_{bl}=(x_1{\beta}_1/{\alpha}_1)_{b}_1+ (x_2{\beta}_2/{\alpha}_2)_{bl}[sinh^{-1}{\beta}_2(bl) {\dot{s}}]/{\beta}_2(bl){\dot{s}}$. The Gibbs activation energy ${\Delta}G_i^\neq$(i = 2 for non-Newtonian units) entering into the intrinsic relaxation time ${\beta}$ is represented by a linear combination ${\Delta}G_i^\neq(bl) ={\chi}{\Delta}G_i^{\neq}_{iPM}+(1-{\chi}){\Delta}G_i^{\neq}_{iPS}$;the intrinsic shear modulus$[[\alpha}_i]^{-1}$ is also represented by $[{\alpha}_i(bl)]^{-1}={\chi}[{\alpha}_{iPM}]^{-1}+(1-{\chi})[{\alpha}_{iPS}]^{-1}$ and the fraction of area on a shear surface occupied by the ith flow units $x_i(bl)$ is similarly represented, i.e., $x_i(bl) = {\chi}x_{iPM}+(1-{\chi})x_{iPS}$. By using these ideas the Ree-Eyring equation was rewritten which explained the experimental results satisfactorily.

Induction of Apoptotic Cell Death by a Ceramide Analog in PC-3 Prostate Cancer Cells

  • Oh, Ji-Eun;So, Kwang-Sup;Lim, Se-Jin;Kim, Mie-Young
    • Archives of Pharmacal Research
    • /
    • 제29권12호
    • /
    • pp.1140-1146
    • /
    • 2006
  • Ceramide analogs are potential chemotherapeutic agents. We report that a ceramide analog induces apoptosis in human prostate cancer cells. The ceramide analog induced cell death through an apoptotic mechanism, which was demonstrated by DNA fragmentation, the cleavage of poly ADP ribose polymerase (PARP), and a loss of membrane asymmetry. Treating the cells with ceramide analog resulted in the release of various proapoptotic mitochondrial proteins including cytochrome c and Smac/DIBLO into the cytosol, and a decrease in the mitochondrial membrane potential. In addition, the ceramide analog decreased the phospho-Akt and phospho-Bad levels. The expression of the antiapoptotic Bcl-2 decreased slightly with increasing Bax to Bcl-2 ratio. These results suggest that the ceramide analog induces apoptosis by regulating multiple signaling pathways that involve the mitochondrial pathway.

Preparation of Flexible Terpolymers using Various Metallocene Catalyst/Borate Cocatalyst System and their Epoxidation

  • Kim, Jung Soo;Choi, Jun;Kim, Dong Hyun
    • Elastomers and Composites
    • /
    • 제54권4호
    • /
    • pp.286-293
    • /
    • 2019
  • In this study, flexible poly(ethylene-ter-1-hexene-ter-divinylbenzene) was prepared using four types of metallocene catalysts (rac-Et(Ind)2ZrCl2, rac-SiMe2(Ind)2ZrCl2, rac-SiMe2(2-Me-Ind)2ZrCl2, (C5Me5)TiCl2[O-2,6-iPr2(C6H3)]) and two types of borate catalysts (trityl tetrakisborate and dimethylanilinium tetrakisborate). The yield, catalytic activity, molecular weight, structure, composition, and thermal properties of the terpolymers prepared using the various catalysts and cocatalyst systems were evaluated. Epoxidation of the terpolymers was successfully performed and this transformation was studied by 1H NMR and FTIR.

말레에이트계 공중합체 I-l3막의 공기/물에서의 계면 특성 (The Air/water Interface Characteristics of Maleate Copolymer LB Films)

  • 신훈규;권영수;이범종;장정수;배진호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1995년도 춘계학술대회 논문집
    • /
    • pp.220-223
    • /
    • 1995
  • Stable polyion-complexed polymeric monolayrers were prepared by spreading perfluoroalkyl monomaleatd copolymers. C$_2$F$\_$8/MA-VE$_2$ and C$_2$F$\_$8/Mv-VE$_3$ on aqueous poly(allylamine) subphase. The monolayer properties have been studied by the surface pressure-area($\pi$-A) isotherms. The C$_2$F$\_$8/MA-VE$_3$containing longer oligoethyleneglycol pendant showed more expaned monolayer phase than the C$_2$F$\_$8/MA-VE$_2$ The polyion-complexed monolayers were transferable on various substrates, and the resulting Langmuir-Blodgett(LB) films were characterized b ET-IR spectroscopy and scanning electron microscopy(SEM) Two-dimensional crosslinking to from a polymer network was achieved by amide formation through heat treatment under vacuum with concurrent removel of perfluoroalkyl tails. SEM observation of this film ona porous membrane filter showed that the four layer film was sufficiently stable to cover the filter pore size of 0.1$\mu\textrm{m}$. The C$_2$F$\_$8/MA-VE$_3$revealed better covering capability than the C$_2$F$\_$8/MA-VE$_2$Immersion of this film in water or in benzend did not cause any change in its appearance and in FT-IR spectra.

  • PDF

태양전지용 ${\mu}c$-Si:H 박막의 저온증착 및 특성분석 (Low Temperature Deposition of ${\mu}c$-Si:H Thin-films for Solar Cell Application)

  • 정연식;이정철;김석기;윤경훈;송진수;박이준;권성원;임광수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 C
    • /
    • pp.1592-1594
    • /
    • 2003
  • This paper presents the deposition and characterization of microcrystalline silicon(${\mu}c$-Si:H) films by HWCVD(Hot-wire Chemical Vapor Deposition) method at low substrate($300^{\circ}C$). The filament temperature, pressure and $SiH_4$ concentration were determined to be a critical parameter for the deposition of poly-Si films. Series A was deposited under the conditions of $1380^{\circ}C$(Tf), 100 mTorr and $2{\sim}10%\{SC:SiH_4/(SiH_4+H_2)\}$ for 60 min. Series B was deposited under the conditions of $1400{\sim}1450^{\circ}(T_f)$, 30 mTorr and $2{\sim}12%$(SC) for 60 min. The physical characteristics were measured by Raman and FTIR spectroscopy, dark and photoconductivity measurements under AM1.5 illumination.

  • PDF

Modelling the Hydrogen-Bonding Interactions in a Copolymer/Biodegradable Homopolymer Blend through Excess Functions

  • Garcia-Lopera, Rosa;Monzo, Isidro S.;Campos, Agustin;Abad, Concepcion
    • Macromolecular Research
    • /
    • 제16권5호
    • /
    • pp.446-456
    • /
    • 2008
  • A recent theoretical approach based on the coupling of both the Flory-Huggins (FH) and the Association Equilibria thermodynamic (AET) theories was modified and adapted to study the miscibility properties of a multi-component system formed by two polymers (a proton-donor and a proton-acceptor) and a proton-acceptor solvent, named copolymer(A)/solvent(B)/polymer(C). Compatibility between polymers was mainly attained by hydrogen-bonding between the hydroxyl group on the phenol unit of the poly(styrene-co-vinyl phenol) (PSVPh) and the carbonyl group of the biodegradable and environmentally friendly poly(3-hydroxybutyrate) (PHB). However, the self-association of PSVPh and specific interactions between the PSVPh and the H-acceptor group (an ether oxygen atom) of the epichlorohydrin (ECH) solvent were also established in a lower extension, which competed with the polymer-polymer association. All the binary specific interactions and their dependence with the system composition as well as with the copolymer content were evaluated and quantified by means of two excess functions of the Gibbs tree energy, ${\Delta}g_{AB}$ and ${\Delta}g_{AC}$. Experimental results from fluorescence spectroscopy were consistent with the theoretical simulations derived with the model, which could also be applied and extended to predict the miscibility in solution of any polymer blend with specific interactions.