• Title/Summary/Keyword: Poly I:C

검색결과 331건 처리시간 0.027초

PLR (Plastic Lithium Rechargeable) Batteries using Nanoscale Materials : A Convenient Source of Electrical Energy for the Future?$\dag$

  • G. Campet;N. Treuil;A. Poquet;S. J. Hwang;C. Labrugere;A. Deshayes;J. C. Frison;J. Portier;J. M. Reau;J. H. Choy
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권8호
    • /
    • pp.885-892
    • /
    • 1999
  • This communication describes the synthesis of : (i) non-toxic and low cost nanocrystalline electrode materials, which can be prepared advantageously at low temperature ; (ii) highly conductive electrolyte membranes formed by the nano-encapsulation within a poly(acrylonitrile)-based polymer matrix of a solution of LiPF6 in organic solvants. The performances of rechargeable PLR (Plastic Lithium Rechargeable) batteries using the above mentioned components are presented.

다결정 $Si_{1-x}Ge_x$박막 증착에 관한 연구(I) 증착변수에 따른 증착속도 및 Ge조성 변화 (A study on the Poly-$Si_{1-x}Ge_x$ thin film deposition (I) Variation of the deposition rate and Ge composition with deposition parameters)

  • 이승호;어경훈;소명기
    • 한국결정성장학회지
    • /
    • 제7권4호
    • /
    • pp.578-588
    • /
    • 1997
  • RTCVD법으로 $SiH_4$$GeH_4$ 가스를 이용하여 oxidized Si 위에 SiH$_4$: $GeH_4$ flow ratio(1 : 0.1~2 : 1), 증착온도(400~$600^{\circ}C$) 그리고 증착압력(1~50 torr)인 조건에서 다결정 $Si_{1-x}Ge_x$박막을 증착하여, 증착변수 변화에따른 $Si_{1-x}Ge_x$ 박막의 Ge 조성 변화와, Ge 조성이 증착속도에 미치는 영향 등에 대해 살펴보았다. 실험결과, 증착온도와 Ge 조성 증가에따라 증착속도는 증가하였으나 증착온도 증가에따라 Ge 조성이 감소하였다. 또한 증착압력 변화에따른 증착속도와 Ge조성 변화는, 증착압력 10 torr까지는 거의 직선적으로 증가하였으나 그이상에서는 서서히 증가함을 알 수 있었다. 이와같이 10 torr 이상의 증착압력에서 증착속도가 서서히 증가하는것은 물질전달 속도에 비해 표면반응 속도가 늦어져 나타난 현상으로 생각된다.

  • PDF

초임계 탄산가스/유기용매/이색성 염료의 혼합계를 이용한 폴리(비닐 알코올) 편광필름의 제조 및 편광특성 (Preparation and Polarization Properties of Poly(vinyl alcohol) Polarizing Film Using the Mixed System of Supercritical $CO_2$/Organic Solvents/Dichroic Dye)

  • 박기상;최이준;장진호;박일현
    • 폴리머
    • /
    • 제35권5호
    • /
    • pp.458-466
    • /
    • 2011
  • 초임계 탄산가스/유기용매 혼합계 상에서 이색성 염료인 C. I. direct black 22(DB22)로 고검화도의 폴리(비닐 알코올)(PVA)을 염색하여 내구성이 강한 편광필름을 제조하였다. 특히, 초임계 탄산가스 상으로 이색성 염료를 녹이기 위한 분산제로 에틸렌 글리콜과 디메틸 설폭사이드의 무게비=4 : 6의 혼합용매계를 사용하였을 때 염색 압력을 200 bar까지 낮출 수 있었다. 초임계 유체계의 사용으로, 최대 염색은 연신 전 투과도로 1% 미만까지, 폐수 발생량은 1/10 수준까지, 감소가 가능하였고, 이와 같이 염색된 PVA 필름을 500% 연신한 후 측정된 편광효율은 94%, 평균 투과도(single piece transmittance)는 30%로 각각 얻어졌으며, 또한 이색성 염료로서의 DB22의 한계 및 개선 방안 등도 검토하였다.

P3HT를 이용한 유기 박막 트랜지스터에 관한 연구 (Investigation on the P3HT-based Organic Thin Film Transistors)

  • 김영훈;박성규;한정인;문대규;김원근;이찬재
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 춘계학술대회 논문집 디스플레이 광소자 분야
    • /
    • pp.45-48
    • /
    • 2002
  • Poly(3-hexylthiophene) or P3HT based organic thin film transistor (OTFT) array was fabricated on flexible poly carbonate substrates and the electrical characteristics were investigated. As the gate dielectric, a dual layer structure of polyimide-$SiO_2$ was used to improve the roughness of $SiO_2$ surface and further enhancing the device performance and also source-drain electrodes were $O_2$ plasma treated for improvement of the electrical properties, such as drain current and field effect mobility. For the active layer, polymer semiconductor, P3HT layer was printed by contact-printing and spin-coating method. The electrical properties of OTFT devices printed by both methods were evaluated for the comparison. Based on the experiments, P3HT-based OTFT array with field effect mobility of 0.02~0.025 $cm^{2}/V{\cdot}s$ and current modulation (or $I_{on}/I_{off}$ ratio) of $10^{3}\sim10^{4}$ was fabricated.

  • PDF

Preparation and In Vivo Evaluation of Huperzine A-Loaded PLGA Microspheres

  • FU XU-DONG;GAO YONG-LIANG;PING QI-LENG;Ren Tang
    • Archives of Pharmacal Research
    • /
    • 제28권9호
    • /
    • pp.1092-1096
    • /
    • 2005
  • Huperzine A-loaded microspheres composed of poly(D,L-lactide-co-glycolide) were prepared by an O/w emulsion solvent evaporation method. The characterization of the microspheres such as drug loading, size, shape and release profile was described. The in vitro release in the initial 7 days was nearly linear with $10\%$ released per day. Thereafter drug release rate became slow gradually and about $90\%$ drug released at day 21. The in vitro release rate determined by dialysis bag method had a good correlation with the in vivo release rate. Huperzine A aqueous solution was intramuscularly injected (i.m.) at 0.4mg/kg and microspheres were intra­muscularly injected at 8.4 mg eq huperzine A/kg in rats. The maxium plasma concentration $(C_{max})$ after i.m. microspheres was only $32\%$ of that after i.m. solution. Drug in plasma could be detectd until day 14 and about $5\%$ of administered dose was residued at the injection site at day 14. The relative bioavailability of huperzine A microspheres over a period of 14 days was $94.7\%$. Inhibition of acyecholinesterase activity (AchE) in rat's cortex, hippocampus and striatum could sustain for about 14 days. In conclusion, huperzine A-loaded microspheres possessed a prolonged and complete drug release with significant inhibition of AchE for 2 weeks in rats.

진공증착법을 이용한 PVDF 박막의 제작 (The manufacture of poly(vinylidene fluoride) thin film through vapor deposition method)

  • 박수홍;임응춘;한상옥;진경시;정해덕;박강식;이덕출
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 C
    • /
    • pp.1190-1192
    • /
    • 1995
  • Poly(vinylidene fluoride)(PVDF) is one of the most studied polymers in the latest date. The interest in PVDF lies in its remarkable piezoelectric and pyroelectric properties. Also, PVDF has at least four known crystalline structures(; they are referred to as the ${\alpha},\;{\beta},\;{\gamma}\;and\;{\alpha}_p$ phase or forms II, I, III and $IV_p$). In this study, the manufactured PVDF thin film through vapor deposition method had form II(; the glass at $70^{\circ}C$). This thin film was investigated by x-ray diffraction(XRD), Fourier Transform Infrared(FT-IR) spectroscopy and Differential Thermal Analysis(DTA). XRD and FT-IR indicate crystallization forms from the glass at $70^{\circ}C$ into form II.

  • PDF

폴리(비닐 알코올) 수용액의 준희박농도 영역에서 사슬 거동에 대한 수소결합의 효과 (Hydrogen Bond Effect on Chain Behavior at the Semidilute Regime of Poly(vinyl alcohol) Aqueous Solution)

  • 박일현;유영철;박기상;이동일;류원석
    • 폴리머
    • /
    • 제30권3호
    • /
    • pp.271-278
    • /
    • 2006
  • 어랙틱 폴리(비닐 알코올)(PVA) 수용액 시스템의 준희박농도에서의 고분자 사슬의 구조 및 거동을 살펴보기 위하여, 온도 $25^{\circ}C$에서 광산란 실험을 실시하였다. 산란 벡터 q에서 얻은 산란광의 세기 I(q)는 Onstein-Zernike 식으로 해석이 불가능하여 단순히 $I(q){\sim}q^{-m}$을 이용하여 fractal 차원 m을 얻었다. 그 결과 농도 3 wt% 이상에서는 $m=2.6{\pm}0.3$으로 일정하게 유지되었다. 동적 광산란으로 얻은 시간상관함수에는 항상 빠른 거동과 느린 거동의 두 종류가 공존하였으며, 빠른 거동의 협동확산계수는 reptation 이론의 농도의존지수 값(=3/4)과 달리 농도 의존성이 거의 나타나지 않았다. 또한 느린 거동은 거대한 크기의 불균일 영역대의 운동으로 해석되며, 이 거동의 농도지수는 -3.0으로써 매우 강한 농도 의존성을 보여 주었다. 이 불균일 영역대의 형성에는 어택틱 PVA의 -OH기 4개의 메소(meso)가 입체 규칙적으로 배향한 부분이 매우 중요한 역할을 하는 것으로 생각되어진다.

PVC/Nematic 액정복합막의 전기광학특성 (Electro-optical Properties of PVC/Nematic Liquid Crytal Composite Films)

  • 이종철;김병규
    • 한국재료학회지
    • /
    • 제3권4호
    • /
    • pp.388-394
    • /
    • 1993
  • PVC/액정 복합막의 응집상태 및 전기광학 특성을 넓은 막조성(30-70wt% LC)에 걸쳐 조사하였다. 또한 optical contrast가 가장 좋은 40/60(PVC/LC)중량조성으로 된 복합막에 대해서는 온도 및 외부교류전계의 주파수 및 전압응답을 측정한 결과 문턱 주파수는 20$V_{p-p}$ 이하(1 kHz, $25^{\circ}C$), rise time및 decay time은 모두 10ms 이하(V$100 _{p-p}$ , 1 kHz, $25^{\circ}C$)였다.

  • PDF