• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.9-10
• /
• 2006

The patterning for the active layer of organic semiconductors is important to attain completely organic-based OTFTs(Organic Thin Film Transistors). We studied on possibility of the application of the conventional photolithography technique to pattern the organic active layer poly(3-hexylthiophene)(P3HT). Patterned P3HT-based OTFTs with Bottom Contact(BC) configuration were fabricated using the conventional photolithography. We achieved field-effect mobilities in the saturation regime ${\sim}1.2{\times}10^{-3}cm^2/V{\cdot}s$, $I_{on/off}$ ratios ${\sim}10^5$ in the subtractive method, ${\sim}8{\times}10^{-4}cm^2/V{\cdot}s$, $I_{on/off}$ ratios ${\sim}10^3$ in the additive one.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.374-377
• /
• 2001

We have synthesized poly(3-hexylthiophene)(P3HT), which is the most famous conducting polymer and studied the optical properties of P3HT. And then fabricated the device using P3HT as an emitting layer. For the improve of hole injection from ITO electrode to P3HT emitting layer, we use transparent polyaniline(PANI) electrode. In the voltage-current-luminance characteristics of ITO/PANI/P3HT/LiF/Al device which use the PANI film synthesised during 5 cycle, the device turn on at the 2V and the luminance of $218nW/cm^{2}$ obtained at 12V. External quantum efficiency of ITO/PANI/P3HT/LiF/Al increased at 8V than that of ITO/P3HT/LiF/Al device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.374-377
• /
• 2001

We have synthesized poly(3-hexylthiophene)(P3HT), which is the most famous conducting polymer and studied the optical properties of P3HT. And then fabricated the device using P3HT as an emitting layer. For the improve of hole injection from ITO electrode to P3HT emitting layer, we use transparent polyaniline(PANI) electrode. In the voltage-current-luminance characteristics of ITO/PANI/P3HT/LiF/Al device which use the PANI film synthesised during 5 cycle, the device turn on at the 2V and the luminance of 218 nW/$\textrm{cm}^2$ obtained at 12V. External quantum efficiency of ITO/PANI/P3HT/LiF/Al increased at 8V than that of ITO/P3HT/LiF/Al device.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.150-153
• /
• 2005

반도체성 고분자인 poly(3-hexylthiophene) (P3HT)과 $C_{60}$ 유도체인 PCBM의 복합재를 이용하여 유기태양전지를 제작하였다. 열처리 온도론 중심으로 다양한 제조조건 하에서의 태양전지 특성을 조사하였다. 열처리 온도를 높임에 따라, P3HT/PCBM 복합재 박막은 뚜렷한 색변화와 함께 가시광 영역에서의 광흡수가 증가됨이 관찰되었고, 소자 성능도 크게 향상되었다. 결과적으로, 본 P3HT/PCBM bulk 이종접합형 구조의 유기 태양전지는 최적화된 제조 조건에서 $2.8\%$의 에너지 전환 효율을 나타내었다($100mW/cm^2$, 백색광).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.163-163
• /
• 2012

We observed strain evolution of P3HT crystals in P3HT:PCBM films and the effect of Al electrode on the evolution during real time annealing process. Based on simple assumptions, both relaxed lattice parameters and thermal expansion coefficient could be quantitatively determined. P3HT:PCBM films displayed tensile strain in as-prepared samples regardless of the presence of an Al layer. In the absence of Al layer, P3HT crystals showed only strain relaxation at an annealing temperature of $180^{\circ}C$. Meanwhile In the presence of an Al layer, the strain was relaxed and changed to compressive strain at around 120C annealing temperature, which indicated a tightening of the thiophene ring packing. These behaviors support the improved performance of devices fabricated by post annealing process.

• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.121-125
• /
• 2014

In this research, nanocomposite layers consisting of poly (3,4,-ethylene dioxythiophene):polystyrene sulfonic acid (PEDOT:PSS) and CuO nanoparticles were investigated as hole transport layers in organic solar cells based on poly (3-hexylthiophene) (P3HT) as the electron donor and (6.6) phenyl-C61-butyric acid methyl ester (PCBM) as the electron acceptor. The addition of CuO nanoparticles to PEDOT:PSS layer improved the solar cell performance with 0.5% CuO nanoparticle concentration. At optimized concentration, CuO mixed PEDOT:PSS films had good electrical ($4.131{\Omega}{\cdot}cm$) and optical (transmittance > 90%) properties for using hole transporting layer. We investigated that improved solar cell performance with CuO nanoparticles mixed PEDOT:PSS films.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.235-235
• /
• 2012

We investigated the energy levels of valence region at the planar junction of poly (3-hexylthiophene) (P3HT) and C61-butyric acid methylester (PCBM) using ultraviolet photoemission spectroscopy (UPS) with ultra high vacuum. These are the most widely used materials for bulk heterojunction (BHJ) organic solar cells due to their high efficiency. In order to make the planar junction, we carried out the electrospray vacuum deposition (EVD) of PCBM onto spin-coated P3HT in high vacuum conditions (${\sim}10^{-5}-10^{-6}$). The planar junction interface exhibited 0.71 eV for the offset between P3HT HOMO and PCBM LUMO, which is different from the gap (0.85 eV) of individual values and is closer to the open circuit voltage of solar cells fabricated with the same material combination.

• 통합자연과학논문집
• /
• 제3권1호
• /
• pp.7-18
• /
• 2010

Ethylene-bridged silsesquioxane resins were synthesized from two monomers: 1,2-bis(trimethoxysilyl)ethane and methyltrimethoxysilane. The silsesquioxane thin films were spin-coated from the copolymerized resins on silicon wafer. Metal insulator metal (MIM), metal insulator semiconductor (MIS) devices were utilized to investigate the electrical properties of the copolymerized thin films. As the films were inserted as gate insulator in the OTFT devices, the field effect mobilitites were evaluated by employing Poly(3-hexylthiophene) (P3HT) as organic semiconductor, which shows that their dielectric properties and mobility values are dependent on the molecular structures and Si-OH concentration involving in the films.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.274-274
• /
• 2006

Recently, conjugated polymer solar cells have attracted a great deal of attention. In this work, we applied the various scanning probe techniques to characterize composite materials typically used to fabricate polymer solar cells: poly-3(hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) and P3HT/PCBM/Au nanoparticle (NP) samples. The latter is studied due to the idea of using the gold NP surface plasmon to enhance the optical absorption of the composite films. AFM is used to characterize the film morphology whereas conducting AFM is used to study the charge transport properties at the nanoscale. We found that there is a direct correlation between the nanoscale charge transport measurements and the device efficiencies.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.99-99
• /
• 2009

차세대 대체에너지로서 유기태양전지는 저비용, flexible한 장점이 있다. 그러나 에너지 효율이 상대적으로 낮아 고효율 유기태양전지 개발이 필요하다. 이 문제를 개선하기위해 본 실험에서는 전기화학적인 방법으로 ZnO 나노구조체 (nanowire, film)를 ITO위에 전착하였다. ZnO 나노구조체는 Poly(3-hexylthiophene)(P3HT):[6,6]-Phnyl-C61-butyric acid methyl ester (PCBM)에서 엑시톤된 전자와 홀의 charge collector와 electron path way로서 사용되었다. 유/무기 하이브리드 태양전지의 구조는 Ag/P3HT:PCBM/(A)/ITO로 사용하였으며 (A)는 (1) ZnO nanowire/ZnO film (2)ZnO nanowire (3)ZnO film으로, 각각의 효율을 측정하였다. 생성된 ZnO 나노구조를 FE-SEM, XRD, TEM, UV/vis로 분석하였고 AM1.5G SUN을 기준으로 하여 Solar simulator로 효율을 측정하였다. 측정결과 Jsc값의 증가를 효율이 향상됨을 알 수 있었다.