• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.477-483
• /
• 2014

Poly(lactic acid) (PLA) and poly(${\varepsilon}$-caprolactone) (PCL) blends with various components for melt-blown non-wovens were prepared by a twin-screw extruder. Tributyl citrate (TBC) was added in order to improve the miscibility between PLA and PCL. The results showed that small circular particles of PCL were dispersed in PLA matrix uniformly. The addition of PCL had the heterogeneous nucleation effect on the crystallization of PLA and decreased thermal stability of PLA. The flow of pure PLA and blends approached to Newtonian liquid at a low shear rate and expressed more obvious viscoelasticity at a high shear rate.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.449-456
• /
• 2014

Ternary blends of poly(L-lactic acid) (PLLA), poly(${\varepsilon}$-caprolactone) (PCL) and polyethylene oxide (PEO) were produced with different concentrations of components via melt blending. By leaching the PEO from the samples by water, porous materials were obtained with potential application for bio scaffolds. Sample porosity was evaluated by calculating the ratio of porous scaffold density (${\rho}^*$) to the non-porous material density (${\rho}_s$). Highest porosity (51.42%) was related to the samples containing 50 wt%. of PEO. Scanning electron microscopy (SEM) studies showed the best porosity resulted by decreasing PLLA/PCL ratio at constant concentration of PEO. Crystallization behavior of the ternary blend samples was studied using differential scanning calorimetry (DSC). Results revealed that the crystallinity of PLLA was improved by addition of PEO and PCL to the samples. The porosity plays a key role in governing the compression properties. Mechanical properties are presented by Gibson-Ashby model.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.2
• /
• pp.13-20
• /
• 2013

In this study, two biodegradable polymer(PLA, PBS) emulsions were treated on agricultural packaging paper such as fruit bagging paper. Water-repellency, mechanical properties, and SEM image with thermal aging were measured on the emulsion treated fruit bagging paper. Biodegradable polymers(such as poly lactic acid, poly butylene succinate) emulsion treated fruit bagging paper had higher water-repellency and strength than other water-repellent(such as acrylic repellent, linseed oil and paraffin wax) treated fruit bagging paper. According to FE-SEM results of polymer emulsion coated fruit bagging paper, the colloidal particles of emulsion after thermal treatment (looks like being) were adhered to the fibers. Thus, using biodegradable polymer emulsion is expected to protect a fruit for a long time.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.3
• /
• pp.77-84
• /
• 2014

Biodegradable nanocomposites were fabricated with poly (lactic acid) (PLA) and Nanomer$^{(R)}$ I.44P using ultrasonication (US). Processing conditions were optimized to obtain the maximum tensile properties of the nanocomposites. Poly (ethylene glycol) (PEG) was used as a plasticizer to avoid the brittleness of nanocompsoties. In order to disperse nanoclay into the PLA matrix, PEG and Nanomer$^{(R)}$ I.44P were firstly mixed and dispersed in the chloroform and followed by ultrasonication for 1 min With 10% PEG 400, tensile stress and Young's modulus of the nanocomposites decreased from 53.5 MPa and 2225 MPa to 37.0 MPa and 1757 MPa, respectively, while the elongation was increased from 4% to 21%. Tensile stress, Young's modulus, and elongation of nanocomposites were also increased with nanoclay concentration up to 2% (w/w) and were decreased with further increase in the nanoclay concentration. Transmittance of nanocomposites were significantly decreased from 62.5% for pure PLA film to 7.8% for 5% nanoclay containing nanocomposites. Water vapor permeability of the nanocomposites was also significantly decreased with nanoclay concentration and the minimum WVP of $3.5{\times}10^{-11}g{\cdot}m/m^2{\cdot}s{\cdot}Pa$ was obtained with 5% (w/w) nanoclay concentration. The PLA/Nanomer$^{(R)}$ I.44P nanocomposites showed a great potential as a environmental friendly food packaging material.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.7 s.262
• /
• pp.732-738
• /
• 2007

Effects of melt-mixing conditions on fracture properties of hydroxyapatite filled bioabsorbable poly(L-lactic acid)(HA/PLLA) composites was investigated by measuring the firacture toughness value of HA/PLLA composites prepared under different mixing time and rotor speed. The fracture surface morphology was also examined by profile measurement and scanning electron microscopies. It was found that the fracture toughness of HA/PLLA composites decreases due to decrease of ductile deformation of PLLA matrix and debonding of interfaces with increase of the rotor speed and mixing time. Effect of mixing process on neat PLLA was also assessed, and it was found that the fracture toughness of PLLA decreases due to disappearance of multiple craze formation and increase of defects. Such thermal and shear-stress degradation were found to be the primary mechanisms of the degradation of HA/PLLA composites during melt-mixing process.

• Journal of the Korean Arthroscopy Society
• /
• v.6 no.2
• /
• pp.188-191
• /
• 2002

The complication caused by a bioabsorbable interference screw composed of Poly-L-Lactic-Acid is rare after anterior cruciate ligament (ACL) reconstruction. We reported a case of a pretibial ganglion at the orifice of the tibial tunnel where the graft tendon had been fixed with a bioabsorbable interference screw $(Bioscrew^{\circledR})$ for ACL reconstruction using autogenous hamstring tendon. The patient was underwent ganglion excision and interference screw removal.

• Textile Coloration and Finishing
• /
• v.25 no.1
• /
• pp.75-81
• /
• 2013

Colorimetric and wash fastness data after repeated wash cycles of Poly Lactic Acid(PLA) fiber were examined with C. I. Vat Blue 1, also other comparing 2 dyes (C. I. Vat Blue 35, C. I. Vat Blue 5), in this study. The fastness of three vat dyes on PLA fiber to repeated washing according to KS K 0430 A-2 regulation increased with dyeing temperatures. The $L^*$ values of the dyed material gradually increased with increasing numbers of wash. Also the f(k) values were decreased reversely. During repeated washing, the vagrant dyes were deposited especially on nylon, polyester, cotton of the adjacent multifiber. C. I. Vat Blue 5 displayed lowest color change to repeated washing of the three dyes used.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.464-470
• /
• 2014

A chemo-mechanical method was used to prepare lignin-containing cellulose nanofibrils(L-CNF) from unbleached woodpulps dispersed uniformly in an organic solvent. L-CNF/PLA composites were obtained by solvent casting method. The effects of L-CNF concentration on the composite performances were characterized by tensile test machine, contact angle machine, scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR). The tensile test results indicated that the tensile strength and elongation-at-break increased by 50.6% and 31.8% compared with pure PLA. The contact angle of PLA composites decreased from $79.3^{\circ}$ to $68.9^{\circ}$. The FTIR analysis successfully showed that L-CNF had formed intermolecular hydrogen bonding with PLA matrix.

• KSBB Journal
• /
• v.29 no.6
• /
• pp.405-413
• /
• 2014

In this study, gemcitabine (Gem)-Poly(L-lactic acid) (PLLA) conjugates were synthesized through an amide linkage reaction. Then, the microparticles of Gem-PLLA/PLLA blends containing gemcitabine were prepared using a supercritical fluid process, called aerosol solvent extraction system (ASES). Gemcitabine-loaded Gem-PLLA/PLLA microparticles obtained from the ASES process showed a spherical shape. The amount of gemcitabine released after 30 day incubation in a phosphate buffer solution of pH 7.4 was about 90% of the total amount of gemcitabine present in the product.

• Advanced Composite Materials
• /
• v.16 no.4
• /
• pp.377-384
• /
• 2007

'Green' composites were fabricated from poly lactic acid (PLA) and bamboo fibers by using a conventional hot pressing method. The insulating properties of the PLA-bamboo fiber 'green' composites were evaluated by determination of the thermal conductivity, which was measured using a hot-wire method. The thermal conductivity values were compared with theoretical estimations. It was demonstrated that thermal conductivity of PLA-bamboo fiber 'green' composites is smaller than that of conventional composites, such as glass fiber reinforced plastics (GFRPs) and carbon fiber reinforced plastics (CFRPs). The thermal conductivity of PLA-bamboo fiber 'green' composites was significantly influenced by their density, and was in fair agreement with theoretical predictions based on Russell's model. The PLA-bamboo fiber composites have low thermal conductivity comparable with that of woods.