• Elastomers and Composites
• /
• 제55권1호
• /
• pp.6-12
• /
• 2020

Poly(ethylene-co-vinyl acetate) compounds and vulcanizates containing dicumyl peroxide (DCP) (HD) were prepared, and the curing agent and reaction products were analyzed using gas chromatography/mass spectrometry (GC/MS). Samples containing trially cyanurate (TAC) and DCP (HDT) were also prepared and analyzed. Some raw DCP were decomposed in the injector region of GC to produce acetophenone. DCP was detected in the HD compound but was not observed in the HD vulcanizate, and instead acetophenone and 2-phenyl-2-propanol were detected. Both DCP and TAC were observed in the HDT compound but not in the HDT vulcanizate, where acetophenone and 2-phenyl-2-propanol were detected. Thus, some of the DCP decomposed during the compounding process. The formation mechanism for acetophenone and 2-phenyl-2-propanol during the crosslinking reaction was identified, and differences in the crosslinking reactions of HD and HDT compounds were discussed.

• 방사선산업학회지
• /
• 제3권1호
• /
• pp.31-37
• /
• 2009

This paper describes the preparation of manufacturing a new nanocomposite material, which involves adding a multi walled carbon nanotube (MWCNT) to improve thermal characteristics of poly (ethylene-co-vinyl acetate) (EVA). We irradiated the prepared nanocomposites with doses of 50 kGy, 100 kGy and 200 kGy at a dose rate of $5kGy\;hr^{-1}$ and examined their thermal stability, activation energy and crosslink level by using a thermogravimetric analyzer (TGA) and gel fraction experiments. TGA results indicated that the samples with a MWCNT had higher Derivative Thermo Gravimetry (DTG) 2nd peak temperatures than those without a MWCNT. And activation energy of the samples reduced as the absorption dose and the MWCNT content increased. Finally, the gel fraction increased rapidly up to 100 kGy as total absorption dose increased, and then the growth rate of all samples was slowly increased from 100 kGy.

• Elastomers and Composites
• /
• 제51권3호
• /
• pp.212-217
• /
• 2016

Influence of poly(ethylene-co-vinyl acetate) (EVA) types and cure systems on cure characteristics of foaming EVA compounds were investigated. Three kind EVAs with different VA contents were employed. Influence of triallyl cyanurate (TAC) and dicumylperoxide (DCP) content on the cure characteristics were examined. The minimum torque ($T_{min}$) and delta torque (${\Delta}T$) decreased as the VA content increased. The ${\Delta}T$ was increased by adding TAC and by increasing the DCP content. For the foaming EVA compounds without TAC, the cure times such as the minimum cure time ($t_{min}$), scorch time ($t_2$), and optimal cure time ($t_{90}$) did not show a specific trend according to the DCP contents. For the foaming EVA compounds containing TAC, the cure times decreased as the DCP content increased. From the experimental results, it was found that efficienct DCP/TAC ratio for improvement of the crosslink density was 1.1~2.0.

• 한국염색가공학회지
• /
• 제30권3호
• /
• pp.190-198
• /
• 2018

We fabricated high transmission and high scattering poly(ethylene-co-vinyl acetate)(EVA) films embedding $SiO_2$ nanoparticles to improve outcoupling efficiency in organic display. The 800nm diameter $SiO_2$ nanoparticles aggregated and formed $1.56{\mu}m$ (with ${\pm}0.853{\mu}m$ standard deviation) diameter microparticles in EVA. The total transmission of scattering film was 83.3% on Polyethylene terephthalate(PET), which was higher than reference 82.8% PET substrate. The diffuse transmission and haze of the $SiO_2$ embedded EVA film were 76.1% and 91.4%, respectively. The optimized condition was 1:1 weight ratio of $SiO_2$ nanoparticles to EVA in Tetrahydrofuran(THF) solution. When the ratio of $SiO_2$ was larger than 1, the total transmission decreased by the increase in backscattering of light due to high scattering. With the optimized condition, we could succeed to fabricate a large scale film(35m in length) with a roll-to-roll process.