• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.126-131
• /
• 2001

The mutually reactive copolymers poly[(vinylbenzyl chloride)-co-(n-butyl acrylate)-co-(2-hydroxyethyl methacrylate)] and poly[(4-vinylpyridine)-co-(n-butyl acrylate)-co-(2-hydroxyethyl methacrylate)] were synthesized for the humidity sensitive material by forming simultaneous quaternization. The humidity sensor showed an average resistance of 8.6 M$\Omega$, 310 k$\Omega$ and 12 k$\Omega$ at 30%RH, 60%RH and 90%RH, respectively. The hysteresis and temperature coefficient were $\pm$3%RH and -0.37~-0.40%RH/$^{\circ}C$. The introduction of n-BA and HEMA increased the resistance of the humidity sensor however it enhanced the adherence to the alumina substrate. The response time was 54 seconds changing from 33%RH to 85%RH and the difference of resistance was +0.2%RH after soaking in water for 2 hr.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.561-568
• /
• 1995

Two methods, precipitation and ultrafiltration, were applied in order to recover platinum group metals(PGM) by complexing them with water-soluble polyelectrolytes, e.g., polyethyleneimine [PEl], poly(2-vinylpyridine) [2-PVP], poly (4-vinylpyridine) [4-PVP], and poly (styrene sulfonic acid) [PSSA]. In the precipitation method, the PGM-polyelectrolyte complex that was formed by mixing first with polybase, e.g.,4-PVP at pH 1 was precipitated by further mixing with polyacid, e.g., PSSA. However, the recovery of PGM obtained by this method was not quantitative(less than 70%). The "sandwiching" binding between the metal anions and two polyelectrolytes was examined by X-ray photoelectron spectroscopy(XPS). The XPS studies indicated that the PGM atom was bound with the acdic and basic polyelectrolyte via its oxygen and nitrogen atom, respectively. The recovery of PGM using polyelectrolyte was further studied by ultrafiltration methods as follows : The PGM ions, eomplexed at pH 1 with polyelectrolyte, allowed the applicntion of membrane filtration by virtue of the great differences in molecular weights between PGM and other low molecular weight species. By applying this method, Pd and Pt (ca. $10^{-4}M$) were selectively separated almost quantitatively from coexisting metal ions, e.g., $Cu^{2+}$ and $Ni^{2+}$. The EPR spectra and viscosity measurements indicated that these polyelectrlytes were not bound to $Cu^{2+}$ and $Ni^{2+}$ ions at this pH, which provided the basis for selective separation of PGM(Pd, Pt and Rh) from these coexisting ions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.61-61
• /
• 2008

Nanocomposites of metal (gold and silver) nanoparticles and multi-walled carbon nanotubes (MWNTs) were prepared with the assistance of various stabilizers for metals and MWNTs. Especially common surfactants such as poly(4-vinylpyridine) (PVP), sodium dodecyl sulfate (SDS), poly(sodium 4-styrene sulfonate) (PSS), and poly(diallyldimethylammonium) chloride (PDDA) were used for the sample preparation. Metal/MWNT nanocomposites were structurally characterized in by transmission electron microscopy (TEM), x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), UV/Vis spectroscopy. In addition, the electrical properties of the nanocomposites were studied by cyclic voltammetry (CV).

• Journal of Adhesion and Interface
• /
• v.18 no.3
• /
• pp.109-117
• /
• 2017

Poly(N-vinyl carbazole) (PVK) homopolymer, poly(4-vinylpyridine) (PVP) homopolymer, and PVK-b-PVP block copolymer were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization and the polymers were used to prepare non-aqueous graphene dispersions with four different solvents, ethanol, N-methyl-2-pyrrolidone (NMP), dichloromethane (DCM), and tetrahydrofuran (THF). $^1H-$ and $^{13}C-NMR$ spectroscopy, size exclusion chromatography (SEC), and differential scanning calorimetry (DSC) were carried out to confirm the chemical structure of the polymers. Stability of graphene dispersions was measured by on-line turbidity measurement. Time-dependent Turbiscan Stability Index (TSI) values were interpreted in terms of surface tension (${\sigma}$) and solubility parameter (${\delta}$) among solvents, polymers, and graphene. It was confirmed that the solubilities of polymer and surface tension between solvent and graphene affected the dispersion stability of graphene. PVK-b-PVP block copolymer could effectively maintain the low TSI values of graphene dispersions in ethanol and THF, which have been known as poor solvents for graphene dispersions. It can also be noted that DCM shows good dispersion stability comparable to NMP, which has been known as the best solvent for graphene dispersion.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.4
• /
• pp.373-376
• /
• 1996

The bulk thermal and photopolymerization of methyl methacrylate(MMA) with phenylsilane were performed to produce poly(MMA)s containing phenylsilyl moiety presumably as an end group. It was found for both thermal and photopolymerization that while the polymerization yields and polymer molecular weights decreased as the relative phenylsilane concentration increases, the TGA residue yields and the relative intensities of SiH IR stretching bands increased with increasing molar ratio of phenylsilane over MMA. The polymerization yield, molecular weight, and TGA residue yield for the thermal polymerization were higher than those for the photopolymerization. Thus, the phenylsilane seemed to significantly influence on the polymerization as both chain initiation and chain transfer agents. However, an appreciable silane effect was not observed on the thermal and photopolymerization of 4-vinylpyridine, acrylonitrile, styrene, and vinyltrimethoxysilane.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.229-238
• /
• 2021

The selective permeate transport characteristics of iodine ion at follicle cell membrane model in thyroid which irradiated by high energy x-ray(linac 6 MV) was investigated. The follicle cell membrane model used in this experiment was a polysulfonated copolymerized membrane of poly(4-vinylpyridine-co-acrylonitrile:VP-AN). The difference of membrane thickness [2 mole AN%(w/w)], fixed carrier concentration[VP-AN%(w/w)], OH- concentration were occurred at difference of I- concentration and quantity of thyroid hormone, respectively. The tensile strength in fixed carrier concentration[VP-AN% (w/w): 0-62 %] of irradiated membrane was found to be decreased about 1.2-1.8 times than non-irradiated membrane. The I- selective permeate initial flux with increase of membrane thickness [2mole AN%(w/w)], fixed carrier concentration[VP-AN%(w/ w)], OH- concentration in irradiated membrane were found to be decreased about 2.1-4.5 times, about 2.2-2.5 times, about 2.1-2.67 times than non-irradiated membrane, respectively. As a result, the quantity of thyroid hormone was decreased at irradiated membrane than non-irradiated membrane. The decrease of thyroid hormone was occurred at hypothyroidism and hyperthyroidism, thyroid cancer, and so on. As the thyroid hormone in cell membrane model were abnormal, cell damages were appeared at cell.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.556-562
• /
• 2006

Quarternized poly(4-vinyl pyridine)s have been prepared by the reaction of poly (4-vinyl pyridine)s (Mw=50 kg/mol and 200 kg/mol) and alkylating agents varying the carbon numbers of the alkyl groups (m):dimethyl sulfate (m=1) as well as bromoalkane (m= 5, 8, 12, 16, and 22) was used as an alkylating agent. The degree of alkylation was determined by using an elemental analysis and NMR spectroscopy. As a result, polyelectrolytes were obtained by the almost full alkylation of poly (4-vinyl pyridine)s. The critical aggregation concentration (CAC) was determined by measuring the change of turbidity occurred by addition of sodium dodecyl sulfate (SDS) into aqueous solution of quarternized poly-(4-vinyl pyridine)s, and the dependence of molecular weight of polymer, the length of N-alkyl group and concentration of NaCl upon CAC was investigated. As a result, as the molecular weight or the length of alkyl group was increased, less amount of SDS Gould induce the aggregation.

• KSBB Journal
• /
• v.6 no.3
• /
• pp.241-247
• /
• 1991

The Poly (4-vinyipyridine-co-styrene) membrane containing Pyridine as fixed carrier was synthesized and characterized. And the active transport mechanism of Cl- and $CCl_3COO^-$ with changing concentration of $H^+$ and $OH^-$ was investigated. $CCl_3COO^-$ was transported not only by a symport mechanism with $H^+$ transfer but also by an antiport mechanism with $OH^-$transfer, while $Cl^-$ was transported only by a symport mechanism with $H^+$ transfer. Observing the initial flux of anions, salt formation constant between ions and membrane (K), and diffusion coefficient in membrane (D) were calculated as follows: for $Cl^-, \;K=4.60{\times}10^2\;mol^{-1}{\cdot}\textrm{cm}^3, \;D=1.57{\times}10^{-3}{\textrm{cm}^2/h$ and for $CCl_3COO^-, \;K=1.l0{\times}10^4\;mol^{-1}{\cdot}\textrm{cm}^3, \;D=1.14{\times}10^{-4}{\textrm{cm}^2}/h$.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.9
• /
• pp.2803-2808
• /
• 2014

High potential and fast electron transfer of a cathode mediator are significant factors for improving the performance of biofuel cells. This paper reports the first synthesis of a cathode redox polymer that is a coordination complex of poly (acrylic acid-vinylpyridine-acryl amide) (PAA-PVP-PAA) and [Os(4,4'-dicarboxylic acid-2,2'-bipyridine)$_2Cl_2]^{/+}$ ($E^{\circ}=0.48V$ versus Ag/AgCl). Bilirubin oxidase can be easily incorporated into this polymer matrix, which carried out the four-electron oxygen under typical physiological conditions (pH 7.2, 0.14 M NaCl, and $37^{\circ}C$). This new polymer showed an approximately 0.1 V higher redox potential than existing cathode mediators such as PAA-PVI-$[Os(dCl-bpy)_2Cl]^{+/2+}$. In addition, we suggest increasing the polymer solubility with two hydrophilic groups present in the polymer skeleton to further improve fast electron transfer within the active sites of the enzyme. The maximum power density achieved was 60% higher than that of PAA-PVI-$[Os(dCl-bpy)_2Cl]^{+/2+}$. Furthermore, high current density and electrode stability were confirmed for this osmium polymer, which makes it a promising candidate for high-efficiency biofuel cells.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.200-204
• /
• 2010

Surface properties are important for determining the functions and uses of materials. So modification of materials with polymer thin films has emerged as an important method to control the physical and chemical properties of the surface layer. We report a simple and effective method to photochemically attach thin polymeric layers to solid surface without chemical derivatization of the substrate and/or the polymer. The system is based on a photoreactive poly(4-vinylpyridine) (P4VP) thin film which is formed on the $SiO_{2}$ surface via spin coating. This substrate is then covered with another polymer film that is reacted with the benzyl radical moieties by UV irradiation. As a result of photochemical reaction, a thin layer of the later polymer is covalently bound to the surface of P4VP. Unbounded polymer is removed by sonication. The thickness of the attached film is a function of the irradiation time and the molecular weight of the polymer. Spatially defined polymer thin films can be fabricated by way of photolithography.