• KSBB Journal
• /
• 제22권3호
• /
• pp.146-150
• /
• 2007

Poly (3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] 미립구를 용매증발법으로 제조하였다. 3.9 mol% 4HB 조성의 P(3HB-co-4HB)를 Ralstonia eutropha의 유가식 배양으로부터 합성하였다. 계면활성제의 농도 및 종류(Tween 80, sodium dodecylsulfate, polyvinyl alcohol), 분산안정제 (Acacia)의 첨가, 고분자 및 모델 약물 (bovine serum albumin)의 농도 등이 미립구 입자 크기에 미치는 효과 및 in vitro 약물 방출 특성을 조사하였다. 평균 입자크기는 분산 안정제 첨가시 감소하였으며, 계면활성제, 약물 및 고분자의 농도가 증가할수록 증가하였다. 약물 방출량은 입자 크기가 감소할수록 증가하였다.

• KSBB Journal
• /
• 제19권5호
• /
• pp.358-362
• /
• 2004

Characteristics of cell growth and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] synthesis was investigated through flask and batch cultures of Alcaligenes latus and Comamonas acidovorans. The specific growth rate of C. acidovorans increased with yeast extract concentration and decreased with 1,4-butanediol concentration. Optimum glucose concentration for growth of C. acidovorans was 20 g/L. In one-step flask cultures of C. acidovorans, final dry cell weight and PHA content decreased with the ratio of 1,4-butanediol to glucose, while the 4HB fraction in copolymers gradually increased to 100 $mol\%$ with an initial 1,4-butanediol concentration of 20 g/L as single carbon source. The specific growth rate of A. latus decreased with v-butyrolactone concentration and optimum sucrose concentration for growth was 10 g/L. In batch cultures of A. latus, 4HB fraction increased with initial v-butyrolactone concentration. P(3HB-co-4HB) with 19 $mol\%$ 4HB was obtained when the initial ratio of v-butyloractone (g/L) to sucrose (g/L) was 10 : 10.

• KSBB Journal
• /
• 제25권3호
• /
• pp.239-243
• /
• 2010

식물성 오일 또는 glycerol로부터 Ralstonia eutropha 여섯 균주의 polyhydroxyalkanoates (PHA) 합성 특성을 조사하였다. 탄소원으로 soybean oil, olive oil, 또는 glycerol 만을 공급시 poly(3-hydroxybutyrate) homopolymer가 생성되었으며, $\gamma$-butyrolactone 또는 pentanoic acid를 함께 공급시 poly(3-hydroxybutyrate-co-4-hydroxybutyrate) 또는 poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer가 각각 합성되었다. 최종 균체농도 및 PHA 함량면에서 최적인 균주는 R. eutropha KCTC 2662로 결정되었으며, 최적 기질인 soybean oil 20 g/L로부터 72 h에 균체농도 1.7~9.2 g/L, PHA 함량 70~92 wt%를 얻을 수 있었다.

• 한국미생물·생명공학회지
• /
• 제23권5호
• /
• pp.588-592
• /
• 1995

Fed-batch fermentation was used to produce the high concentrations of poly-$\beta $-hydroxybutyrate (PHB) and poly-$\beta $-(hydroxybutyrate-co-hydroxyvalerate) (PHB/V). Specific growth rate ($\mu $), yield of cell from glucose (Y$_{x/s}$) were calculated from the two samples in 3 to 5 hours of interval and they were reflected on the determination of glucose feeding rate to maintain the glucose concentration at around 10 g/l in the culture broth. PHB was accumulated after the nitrogen became limited at 60 g/l of dry cell weight by changing ammonia water to 4N-NaOH solution. As results, the final dry cell weight (DCW) of 170 g/l, PHB of 115 g/l were obtained in 50 hours and the overall productivity was 2.4 g/l$\cdot $h. After PHB accumulation, cosubstrate of glucose and propionic acid (PA) was fed to accumulate PHB/V. But, PA feeding rate was decreased from 3 g/l$\cdot $h to 1 g/l$\cdot $h to prevent PA from accumulating to high level in the broth, which is very inhibitory to the cells. As results, DCW, PHB and PHV were 147.5 g/l, 90 g/l and 8 mole % of hydroxyvalerate, respectively.

• Journal of Microbiology and Biotechnology
• /
• 제8권5호
• /
• pp.540-542
• /
• 1998

Five microorganisms capable of degrading an aromatic medium-chain-length polyhydroxyalkanoate ($PHA_{MCL}$), poly(3-hydroxy-5-phenylvalerate) (PHPV), were isolated from wastewater-treatment sludge. Among the isolates, JS02 showed degrading activity consistantly during several transfers. The isolate JS02 could hydrolyze another aromatic MCL copolyester, poly(3-hydroxy-5-phenoxyvalerate-co-3-hydroxy-7-phenoxyheptanoate), ［P(5POHV-co-7POHH)］, and other short-chain-length PHAs ($PHA_{SCL}) such as poly(3-hydroxybutyrate) ［P3(HB)］, poly(3-hydroxybutyrate-co-4-hydroxybutyrate) ［P(3 HB-co-4 HB)］, and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) ［P(3HB-co-3HV)］ with relatively low activity. The culture supernatant of JS02 showed hydrolyzing activity for the p-nitrophenyl esters of fatty acids.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권6호
• /
• pp.603-606
• /
• 2005

Ralstonia eutropha NCIMB 11599 and ATCC 17699 were grown, and their productions of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] compared. In flask cultures of R. eutropha NCIMB 11599, cell concentration, P(3HB-co-4HB) concentration and polymer content decreased considerably with increases in the ${\gamma}-butyrolactone$ concentration, and the 4HB fraction was also very low (maximum 1.74 mol%). In fed-batch cultures of R. eutropha NCIMB 11599, glucose and ${\gamma}-butyrolactone$ were fed as the carbon sources, under a phosphate limitation strategy. When glucose was fed as the sole carbon source, with its concentration controlled using an on-line glucose analyzer, 86% of the P(3HB) homopolymer was obtained from 201g/L of cells. In a two-stage fed-batch culture, where the cell concentration was increased to 104g/L, with glucose fed in the first step and constant feeding of ${\gamma}-butyrolactone$, at 6g/h, in the second, final cell concentration at 67h was 106g/L, with a polymer content of 82%, while the 4HB fraction was only 0.7mol%. When the same feeding strategy was applied to the fedbatch culture of R. eutropha ATCC 17699, where the cell concentration was increased to 42 g/L, by feeding fructose in the first step and ${\gamma}-butyrolactone$ (1.5g/h) in the second, the final cell concentration, polymer content and 4HB fraction at 74h were 51g/L, 35% and 32 mol%, respectively. In summary, R. eutropha ATCC 17699 was better than R. eutropha NCIMB 11599 in terms of P(3HB-co-4HB) production with various 4HB fractions.

• 폴리머
• /
• 제32권3호
• /
• pp.284-289
• /
• 2008

Poly(n-butylmethacrylate)(PBMA)와 poly(3-hydroxybutyrate-co-4-hydroxybutyrate)(PHA)가 혈관 협착 방지를 위한 국소 약물 요법시 유용한 고분자인지 검정하였다. 10% paclitaxel 함유 필름으로부터 방출되는 paclitaxel은 초기 1주간은 빠르게, 30일까지는 중증도로, 이후는 천천히 방출되었다. Paclitaxel 함유 필름들은 풍선 손상을 가한 쥐 경동맥의 신생내막 증식을 억제하였다(PBMA vs control : $0.03{\pm}0.02$ vs $0.10{\pm}0.01\;mm^2$, p<0.05; PHA vs control: $0.04{\pm}0.03$ vs $0.09{\pm}0.01\;mm^2$, p<0.05). PBMA와 PHA는 혈관 협착 방지를 위한 약물 전달 고분자로 유용할 것으로 사료된다. 고분자 필름은 혈관 외벽에 장착이 용이한 경우 사용될 수 있다. 또한, 이 고분자들은 약물 방출 스텐트 개발시 이용될 수 있다.

• 대한환경공학회지
• /
• 제35권2호
• /
• pp.109-114
• /
• 2013

Polyhydroxyalkanoates (PHAs)는 다양한 미생물이 세포 내에 저장하는 에너지 저장물질로 생체적합성 플라스틱의 원료 물질이다. 본 연구에서는 Cupriavidus necator를 사용하여 독립영양배양조건으로 poly(3-hydroxybutyrate) (P(3HB))를 생산함에 있어서 $CO_2$ 농도가 미생물의 성장과 P(3HB)의 축적에 미치는 영향을 확인하였다. 첫 번째 질소원을 포함한 배지에서의 6일 간의 배양 단계에서 C. necator의 균체수는 $CO_2$ 농도와 관계없이 증가했지만, 균체 내에 축적된 P(3HB)의 양은 $CO_2$ 농도가 1-20%로 증가함에 따라 감소하였다. 두 번째 질소원이 제거된 배지에서의 4일 간의 배양 단계에서 P(3HB)의 축적량은 3% $CO_2$에서 가장 많았다. 하지만 전체 10일 간의 배양기간 동안 합성된 총 P(3HB)의 양은 1, 3, 10, 20% 순으로 나타났다. 따라서 본 연구에서는 $CO_2$를 사용하여 P(3HB)를 축적할 때 1-20% $CO_2$ 중에서 1% $CO_2$가 가장 효율적임을 확인하였다.

• KSBB Journal
• /
• 제18권5호
• /
• pp.404-407
• /
• 2003

R. eutropha의 PHA 생합성 유전자를 포함하는 플라스미드 pSYL107을 가진 재조합 대장균 GCSC6576과 A. latus PHA 생합성 유전자를 포함하는 플라스미드 pJC4를 가진 fadR atoC 돌연변이주 재조합 대장균 LS5218의 유청으로부터 P(3HB-co-3HV) 합성을 비교하였다. 재조합 대장균 GCSC6576(pSYL107)의 플라스크 배양에서 acetic acid induction과 oleic acid의 첨가는 3HV 함량을 증가시켰다. 재조합 대장균 LS5218의 pH-stat 유가식 배양결과, 39시간에 균체농도 31.8 g/L, P(3HB-co-3HV) 농도 10.6 g/L, P(3HB-co-3HV) 함량 33.4%, 3HV 함량 6.26 mol%를 얻을 수 있었다.

• 한국미생물·생명공학회지
• /
• 제24권1호
• /
• pp.92-100
• /
• 1996

For the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(P(3HB-co-3HV)) from butyric acid and valeric acid, 10 strains of bacteria capable of producing P(3HB-co-3HV) were isolated from soil. Among them, the strain HJ-067 showed the best ability of producing P(3HB-co-3HV), and was indentified as a Azotobacter sp. For the production of P(3HB-co-3HV), the optimum concentrations of butyric and valeric acid were 3.0g/l, respectively. The most effective nitrogen source was $(NH_4)_{2}SO_4$ at an optimum concentration of 0.75g/l, which was equivalent to 21.36 in C/N ratio. Deficiency of the cationic metal ions ($Zn^{2+},\;Co^{2+},\;Mn^{2+}$) in the proguction medium had stimulating effect on P(3HB-co-3HV) accumulation, especially in the manganese. deficient medium. The optimum temperature for P(3HB-co-3HV) production was 27$^{\circ}C$ and the optimum initial pH was 7.0. Under the optimum conditions, 1.82g/l of P(3HB-co-3HV) and 3.00g/l of dry biomass were produced after 36 hour cultivation, and the P(3HB-co-3HV) yield and HV% were 60.60% (w/w), 15.92%, respectively.