• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.561-564
• /
• 2003

The machining technology for the removal of micro-burr has been demanded because electrode parts of electron gun have minute holes. In this study, Magnetic Assisted Polishing(MAP) is applied to remove the micro-burr instead of the contentional polishing process such as the etching and barrel. Optimal polishing conditions are selected from many experiments using the tool of the flat end slit type. On the basis of experimental results, the deburring machine for the Magnetic Assisted Polishing of electrode part is developed and its performance is evaluated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.749-750
• /
• 2007

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.318-323
• /
• 2003

In order to polish complicated shaped inner surfaces of molds, a new polishing method with consolation liquid was Invented The MAGIC (MAGnetic Intelligent Compound) Polishing is the best method, a countermeasure of polishing trouble that is reduce of productivity and instability of quality. But because MAGIC polishing is new polishing method there is no study of the standardization of polishing by MAGIC wheel yet. So we want to standadize MAGIC polishing condition. For the First time, we will evaluate the influence of composition ratio and kind of polishing grain in polishing surface roughness. In this study, we determined amount of dressing oil and dressing point as kind and composition ratio of polishing grain. we compared surface roughness case by case

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.1
• /
• pp.99-106
• /
• 2002

For the development of a ultra-precision CNC polishing system including on-machine measurement system, we study a corrective polishing algorithm. We calculated unit removal profiles for various flat type polishing tools and polishing tool positions. Using these results we simulate the corrective polishing process based on dwell time control. We calculate dwell time distributions and residual error of the polishing simulation method and the FFT calculation method. We test corrective polishing algorithm with an optical glass. The target removal shape is a sine wave that has amplitude 0.3 micro meters. We find this polishing process has a machining resolution of nanometer order and is effective for sub-micrometer order machining. This result will be used for the software development of the CNC polishing system.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.40-45
• /
• 2004

Recently, aspheric optical lenses and mirrors, which are harder to manufacture and measure than the conventional spherical ones, are widely used, particularly in electronic fabrication process. Generally, interferometric optical method is used for the measurement of spherical optical surface. However, the interferometric method for aspheric surface measurement is difficult because it needs a precise null corrector and strict environmental conditions such as constant temperature, humidity and vibrations. We have been studied on the manufacturing of aspheric optics to improve the surface profile accuracy and productivity using a corrective polishing process. For the corrective polishing, a practical method of On-Machine Measurement (OMM) is required. For this purpose, an optical OMM system has been studied using the Shach-Hartmann test, which is very robust to the practical polishing environment. The wavefront has been reconstructed from the measured data using the primary aberration polynomial function by the least squares fitting. The measured result of the OMM system shows that the maximum deviation is less than 200 nm for the one of commercial Fizeau interferometer Wyko 6000.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2006

The finishing process of die requires the processing technique of a height efficiency and precision. Because the precision of die gives the quality of goods the influence directly. The hydro-static polishing device employs the hydro-static axis and is able to polish the structure of complex picture under the constant pressure and is got constant surface roughness at all polished plane. Therefore, In order to polish precision sculptured surface, it was used the hydro-static polishing device. Polishing device's polishing characteristic is estimated by polishing conditions which are size of abrasive, material of tools. And, because the surface quality of workpiece depends on polishing pattern which relates to motion of abrasive grain. The polishing characteristic according to polishing pattern was evaluated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.27-33
• /
• 2004

Electro-theological fluid is recently used for the micro polishing of 3-dimensional micro-aspherical lens. It's also used for polishing small area defects on the wide flat wafer. Since ER fluid shows a behavior of viscosity changing under certain electric fields. micro polishing efficiency may be enhanced for certain cases. In this paper, a perfluorinated carbonyl fluoride oil based ER fluids was used to improve surface polishing rate and submicron-scale accuracy. As the polishing electrodes, micro size cylindrical tools had been used for maximizing the electric field. An experimental device, which was applied for micro polishing a number of wafers of 4inches in size and other workpiece. was made on a precision polishing system. It consisted of a steel electrode. a wafer fixture. l0㎃ current and DC 5㎸ power supply unit, and a controller unit. From the Experiments. the ER fluid is applicable for micro polishing of small parts.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.32-38
• /
• 2006

The magnetic fluid polishing technique can polish the tool of complex shape, because the polishing method which polishes as compress the workpiece by the magnetism abrasives to arrange to the linear according to the line of magnetic force. Therefore, we producted the magnetic fluid polishing device in order that mirror like finishing processes the tool surface. In order to a polishing condition selection, polishing characteristic was estimated by polishing conditions which are magnetic flux density, polishing speed, grain size, magnetic fluid. The tool was polished to the selected polishing condition. The result to evaluate the polished tool's performance with the cutting force and tool wear, the polished tool's performance was improved compared with the tool not to polish.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.950-955
• /
• 2001

For the development of an ultra-precision CNC polishing system including on-machine measurement system, we study a corrective polishing algorithm. We analyze and test the unit removal profiles for a ball type polishing tool. Using these results we calculate dwell time distributions and residual errors for a target removal shape. We use the polishing simulation method and feed rate calculation method for the dwell time calculation. We test corrective polishing algorithm with an optical glass. The target removal shape is a sine wave that has amplitude 0.3 micro meters. We find this polishing process has a machining resolution of nanometer order and is effective for sub-micrometer order machining. This result will be used for the software development of the CNC polishing system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.783-786
• /
• 2000

For the development of a ultra-precision CMC polishing system including on-machine measurement system, we study a corrective polishing algorithm. We calculated unit removal profiles for various polishing tools and polishing tool positions. Using these results we simulate the corrective polishing process based on dwell time control. We calculate dwell time distributions and residual error of the polishing simulation method and the FFT calculation method. We got good dwell time distributions and small residual when we used the FFT calculation method. This results will be used for the optimization of corrective polishing process.