• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.35-39
• /
• 2000

Large-area high-temperature superconducting (HTS) films, filter design and damage-free processing technique have been developed to fabricate low insertion loss and sharp skirt filters. Further, long life cryocooler, low temperature low noise amplifier (LNA) and cryocable have been developed to assemble HTS filter subsystem for IS-95 and IMT-2000 mobile telecommunication. The surface resistance of the films was about 0.2 milli-ohm at 70 K, 12 GHz. An 11-pole HTS filter for IS-95 telecommunication system and a 16-pole HTS filter for IMT-2000 telecommunication system were designed and fabricated using 60 {\times}$ 50 mm$^2$ and one half of 3-inch diameter YBCO films on a 0.5-mm-thick MgO substrate, respectively. We have assembled the filter and low temperature LNA in a dewar with the cryocooler. Ultra low-noise (noise figure: 0.5 dB at 70 K) and ultra sharp-skirt (40 dB/1.5 MHz) performance was presented by the IS-95 filter subsystem and the IMT-2000 filter subsystem, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.46-48
• /
• 1988

The effect of cold reduction ratio on magnetic properties of 45% Ni-Fe permalloy was studied. To know the relationship between the crystal orientation and the magnetic properties, the pole figure was measured by X-ray diffraction method. In the case of single rolled reduction, the coercive force decreased with cold reduction ratio monotonically, but the maximum permeability, induction and squreness increased drastically. In the case of double rolled reduction (total reduction ratio is 90%), the saturation and residual induction increased slightly with secondary reduction ratio, but the maximum permeability and the coercive force had the maximum and the minimum value at the 50/50% reduction ratio respectively. And strong {100} <100> pole was developed by increasing the cold reduction ratio.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.309-312
• /
• 2001

FEM simulating system of the cross-rolling texture formation offers a systematic and efficient way of exploring the relationship between the process variables and the state of plastic anisotropy of sheet product. Cross-rolled sheets possess higher average plastic strain ratios and lower planer anisotropy than those of the straight-rolled sheets. The employed model is a finite-element polycrystal model which each element used in FEM is assumed to be a crystal having different orientation by Takahashi. Texture development, deformation textures due to cross-rolling are predicted for face-centered cubic sheet metal. Crystal orientations are assigned on the basis of the pole figures obtained by X-ray diffraction. Development of anisotropy during cross rolling of an fcc sheet material is predicted theoretically with respected to flow stress and R-value in tensile test.

• Journal of the Korean Ceramic Society
• /
• v.36 no.10
• /
• pp.1075-1079
• /
• 1999

LaSrCoO3 thin films were spin-coated onto the SrTiO3(100) substrates by the chemical solution process. X-ray diffraction $\theta$-2$\theta$ scans and X-ray diffraction $\beta$ scans were used to determine the crystallinity and in -plane alignment behavior of the films. The X-ray diffraction pattern showed the film obtained by annealing at 80$0^{\circ}C$ was highly oriented. The X-ray diffraction pole-figure analysis and reciprocal-space mapping (2$\theta$-$\Delta$$\omega$ scans) of the resulting film showed that the film comprising the pseduocubic phase had an epitaxial relationship with the SriO3 substrate.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.171.1-171.1
• /
• 2005

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.104-104
• /
• 2003

RF magnetron sputtering 법을 이용하여 LaA1O$_3$, SrTiO$_3$, MgO 단결정 기판 위에 BaTiO$_3$ 박막을 에피텍셜하게 증착하여 박막의 특성과 마이크로 웨이브에서의 유전특성을 평가하였다. 각 기판위에 증착한 박막의 격자상수와 FWHM을 조사하였고, pole figure로 에피텍셜 성장을 관찰하였다. 각 시편에 상부 전극으로 interdigital 타입의 전극을 photolithography 하여 캐패시턴스와 tan $\delta$을 조사하였다. 각 기판의 변화에 따른 격자상수 변화와 유전 특성의 변화를 고찰하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.49-51
• /
• 1998

The 4-pole LHSM was composed of the figure-of-eight shaped 3-phase armature windings. DC field windings, and the segmented secondary with the transverse bar track. These parameters were computed from the analytical expressions and examined from FEM analysis.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1526-1526
• /
• 2016

• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.184-189
• /
• 1999

1000 $\AA$ thick Fe films were epitaxially grown on MgO(001) by an rf sputtering and effects of substrate temperature on the structural and magnetic properties were investigated. X-ray diffraction intensity increased with increasing substrate temperature and inter-planar spacing $d_{(002)}$ decrease with increasing the temperature up to 25$0^{\circ}C$. The increased intensity and decreased inter-planar spacing were thought to be attributed to the enhancement of lattice match between Fe films and MgO, thus yielding good epitaxial growth. By using torque magnetometer, VSM and pole figure, very nice epitaxial growth of sputtered Fe films on MgO could be confirmed and $K_1$ value of Fe films grown at 25$0^{\circ}C$ was $4.6{\times}10^5\;erg/cc$, which was very similar to that of bulk single Fe crystal.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.2
• /
• pp.111-115
• /
• 2000

$BaTIO_3$ thin films were prepared on (100) $BaTIO_3$ substrates by coating- pyrolysis process using metal-organic compounds of Ba and Ti. The amorphous films prefired at $450^{\circ}C$were crystallized above $700^{\circ}C$ under oxygen partial pressure of $2\times 10^{-4}$. The lattice parameters of the perpendicular axis for the $BaTIO_3$ thin films heat-treated below $800^{\circ}C$ were closer to a value of cubic $BaTIO_3$, whereas those above $800^{\circ}C$ were closer to a value of tetragonal BaTiG. The results of XRD P scan and pole-figure analyses indicated that BaTiO, thin films have an epitaxial relationship with the $SrTiO_3$ substrates. The $BaTIO_3$thin films annealed at$800^{\circ}C$ showed the surface with island-like grains about 0.4$mu \textrm{m}$ and the cross section of 0.8 $mu \textrm{m}$ thickness with granular grains.