• 한국산업보건학회지
• /
• 제1권2호
• /
• pp.144-153
• /
• 1991

This study was conducted to evaluate worker exposure to airborne asbestos fibers by industry, and to evaluate polarized-light microscopy for determining airborne asbestos fibers. A total of 11 plants including asbestos textile, brake-lining manufacturing, slate manufacturing, and automobile maintenance shops were investigated. Rsults of the study are summarized as follows. 1. Worker exposure levels to airborne asbestos fibers were the highest in asbestos textile industry, followed by brake-lining manufacturing, slate manufacturing, and automobile maintenance shops, in order. In asbestos textile industry, large variation of asbestos levels was found by plants. The worst plant indicated airborne fiber concentrations in excess of 10 fibers/cc, however, the best plant showed concentrations within 0.50 fibers/cc. 2. Characterization of airborne fibers by industry indicated that fibers from asbestos textile industry were the longest with the largest aspect ratio. Fibers from automobile maintenance shops were the shortest with the smallest aspect ratio. Based on characteristics of fibers and the highest levels of concentrations, it is concluded that workers in the asbestos textile industry are exposed to the highest risk of producing asbestosis, lung cancer, and mesothelioma. 3. Result s obtained using polarized-light microscopy were $43.7{\pm}12.3%$ of the results obtained using phase contrast microscopy. This may be resulted from the worse resolution of polarized-light microscopy than that of phase contrast microscopy. Based on the results, it is recommended that polarized-light microscopy be used for mainly bulk sample analyses and further study be performed to improve the method for determining airborne samples. However, polarized-light microscopy can be used for determining thick fibers.

• Journal of the Optical Society of Korea
• /
• 제9권1호
• /
• pp.32-35
• /
• 2005

In light microscopy, spatial resolution is limited by diffraction effect. Confocal microscopy has improved resolutions in both lateral and axial directions, but these are still limited by diffraction effect. Confocal self-interference microscopy (CSIM) uses interference between two perpendicularly polarized beams to enhance lateral resolution. In previous research, we proposed a calcite plate with its optic-axis perpendicular to the propagation angle and one of the boundary surfaces of the plate. This type of plate is not widely used to our knowledge. In this paper, we change the calcite plate to more common one, which is commercially available. This calcite plate has its optic axis in the plane of incidence. We analyze the characteristics of this calcite plate and numerically compare the performances of CSIM in previous research and CSIM with the commercial calcite plate. Numerical results show improved performance when using the commercial calcite plate

• 한국산업보건학회지
• /
• 제21권4호
• /
• pp.222-226
• /
• 2011

This study was conducted to identify the characteristics of analytical errors shown in the Korean quality control program on bulk asbestos analyses using polarized light microscopy (PLM). 179 participating laboratories were required to analyze 4 samples respectively and asked to classify each test sample as asbestos-containing (positive) or non-asbestos-containing (negative). For positive samples, participants were also asked to identify the type and semiquantitate the contents of asbestos present. The test results showed 21 (4%) false negative errors among 562 samples, 9 (6%) false positive errors among 154 samples and 53 (9%) asbestos identification errors among 562 samples. Most of false negative and positive errors were observed in a few types of samples. Higher frequencies of asbestos identification errors were shown in samples containing two or more types of asbestos and samples containing anthophyllite, tremolite or actinolite asbestos. For semiquantitative analyses, the ratios of mean to nominal weight contents were 2.1 for chrysotile and 2.9 for amphiboles. A tendency of over-estimation was observed in semiquantitative analyses using the visual estimation technique and higher in case of analyzing samples containing amphiboles than chrysotile. Coefficients of variation (CVs) of semiquantitative analytical results were 0.44~0.83 and 0.5~1.14 for samples containing chrysotile and amphibole asbestos, respectively.

• Elastomers and Composites
• /
• 제45권4호
• /
• pp.286-290
• /
• 2010

Coumarin기가 포함된 액정성을 가진 단량체를 액정 상태에서 UV 조사에 의해 중합하였다. Cycloaddition 반응에 의해 coumarin 액정 단량체는 이량체로 전환되었으며, 광이량화 반응 후에도 액정성이 유지되었다. 그리고 이러한 이량체는 단량체의 액정범위 보다 넓은 영역에서 액정성을 나타내었다. 화합물의 구조는 FT IR 및 $^1H$ NMR에 의해 확인하였으며, 그들의 열적 상전이온도 및 열안정성들은 DSC, GPC 및 편광현미경에 의해 조사하였다. 광중합에 의해 생성된 고분자 생성물은 광학 편광 현미경 관찰에 의해 스멕틱 및 네마틱 조직을 갖는 쌍방성 액정성을 보였다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 춘계학술대회 논문집
• /
• pp.314-315
• /
• 2003

석면은 자연적으로 발생되는 광물로 1887년 캐나다의 케베크 지방에서 채굴이 시작되어 흡음, 단열, 내부식성, 내약품성이 뛰어나고 값이 싸자는 이점 때문에 90%이상이 건축재료로 사용되었다. 석면은 장기간 노출될 경우 대략 15년에서 30년의 잠복기를 거쳐 석면폐증, 폐암 악성 중피종을 등을 유발하며 단 한번 진단되면 아직 이렇다할 치료방법이 없다. 대체적으로 석면폐의 경우 질병의 발생과 석면 섬유 사이에는 양-반응관계를 보이며(Beckla ke et al., 1980) 악성중피종과 폐암의 경우는 화학적 성질과 함께 섬유의 굵기, 길이, 모양 등의 물리적 성질이 질병의 발생과 밀접한 관계가 있는 것으로 보고되고 있다(Lippmann, 1988). (중략)

• 대한후두음성언어의학회지
• /
• 제9권2호
• /
• pp.147-151
• /
• 1998

Primary localized laryngeal amyloidosis is an uncommon disorder of unknown cause that occurs in the absence of systemic amyloidosis or associated disease. There is a risk of either missing concomitant systemic amyloidosis or exhaustively investigating for this when it is not present through failure to appreciate the nature of the disease. We present 2 cases of primary localized laryngeal amyloidosis in supraglottic region. Biopsy of the mass of patients revealed findings consistent with amyloidosis, which were Congo red reaction with a apple green birefringence in polarized light fluorescence microscopy. An extensive workup for systemic amyloidosis was negative. All of two cases were treated by vaporization via $CO_2$ LASER using "Swiftlase Flshscan" for creating a wide, shallow char-free treatment site by precisely controlling ablation depth without causing residual thermal damage to tissue. The postoperative recovery of all cases was uneventful with good vocal quality and no aspiration. At the present time, the patients have no evidence of disease, recurrence and complication.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.158-159
• /
• 2000

광원의 근처에만 존재하는 근접장(Near-field)이 먼장(Far-field)과는 매우 다른 특성을 보인다는 것은 널리 알려진 사실이다. 일반적으로 먼장은 횡파(transverse wave)이며 광원에서 멀어질수록 1/r의 함수로 그 세기가 감소하는데 반하여, 근접장은 시간의존항을 제외하고는 정적인 분포를 보이고(static), 종파(logitudinal wave)성분이 오히려 크며 광원의 미세구조에 직접 관련되어 있다. 이러한 근접장이 근접장 주사 광학현미경(Near-field Scanning Optical Microscopy)의 발전으로 인해 실험적으로 연구되기 시작하면서 여러 가지 예기치 못한 현상들이 발견되고 있다. 그중 하나로서, 원편광된 빛(Circularly polarized light)을 내는 광원의 근접장을 측정한 실험에서 광원에 접근할수록 원편광이 사라지는 현상이 실험적으로 보고된바 있다.$^{(1)}$ 본 발표에서는 Bethe의 모델과 다중극 장(Multipole field)의 근접장을 분석하여 고전전자기론 내에서 근접장의 각 운동량에 대해 논의한다. (중략)

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1651-1655
• /
• 2007

Rod-like polymerizable LC molecules having two different reactive groups, i.e. acryl and diacetylene groups were prepared. 4-Hydroxyphenyldiacetylenes were synthesized by the coupling reaction of 1-bromoalkynes with 4-ethynylphenol and then reacted with 4-(6-acryloyloxyalkyloxy)benzoic acid to give polymerizable LC molecules 4a-d. The mesomorphic properties of compounds 4a-d were investigated by differential scanning calorimetry, polarized optical microscopy and X-ray diffractometry. Compounds 4a-c exhibited smectic and nematic phases, but compound 4d having a longest alkyl tail among the series formed only a smectic phase. Photopolymerizability of acryl and diacetylene groups was investigated by IR spectroscopy. An anisotropic polymer film could be prepared by selective polymerization of acryl groups with 365 nm UV light in the presence of a photoinitiator (2,2-dimethoxy-2-phenylacetophenone). The subsequent reaction of diacetylene groups with 254 nm UV light disrupted the anisotropic structure, suggesting that these LC molecules could be used for imaging on the film.

• Elastomers and Composites
• /
• 제54권1호
• /
• pp.14-21
• /
• 2019

Main-chain/side-chain liquid crystalline polymers (MCSCLCPs) combined with an azobenzene group and a cholesteryl group were synthesized to impart light and temperature sensitivity to the polymer. The polymers were designed with the azobenzene unit as the mesogenic group of the main-chain and various compositions of the azobenzene and cholesteryl units as the mesogenic group of the side-chain. The chemical structures and physical properties of the synthesized polymers were investigated by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, differential scanning calorimetry, thermogravimetric analysis, polarized optical microscopy, and ultraviolet-visible (UV-Vis) spectroscopy. All the MCSCLCPs were amorphous and exhibited enantiotropic liquid crystal phases; these polymers achieved the nematic phase with increasing content of the azobenzene group and exhibited the cholesteric phase with weak liquid crystallinity as the content of the cholesteryl group was increased. Furthermore, the polymers containing the azobenzene group showed photoisomerization when exposed to UV-Vis light, and the CP-A3C7 and CP-A5C5 polymers exhibited thermochromism in the temperature range of the liquid crystal phase.

• 한국산업보건학회지
• /
• 제21권3호
• /
• pp.123-127
• /
• 2011

Objectives: The purpose of this study was to investigate the status of asbestos-containing materials (ACMs) used on ships and to consider measures for preventing worker exposure to asbestos fibers. Methods: A total of 17 ships including 16 ships under repair and a ship under construction at shipyards in Korea were investigated. Bulk samples were collected from suspected ACMs on engine exhaust pipes, boiler steam pipes, generator exhaust pipes, and etc. in ships in order to identify the presence of ACMs. Types and contents of asbestos were determined using polarized light microscopy (PLM). Results: ACMs were found from 14 ships out of 17 ships investigated. Only chrysotile asbestos was found from all samples. ACMs were mainly found from samples collected at the exhaust pipes of the engine, generator and incinerator, and boiler steam pipes where exhaust gases or steam of high temperature pass through. In most cases, types of ACMs were asbestos-containing fabrics such as asbestos tape. Friable ACMs were also found in some cases. Use of ACMs on ships was relevant to built time and owner of the ships rather than type and tonnage of the ships. Conclusions: ACMs were found from most ships built prior to 2000s. Therefore, measures for preventing asbestos-related diseases such as preparation of asbestos map on the ship and installation of warning signs, hazard communication with workers (ship-repairing workers, engine room workers and etc.), and follow-up for worker's health management are needed.