• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.145-150
• /
• 2007

Optical communication according to request of technology of communications and optical fiber to be full filed faster communication and pass over transmission capacity limit per unit area, per unit hour appeared, and this optical fiber acts the biggest role to influence performance of optical communication network. Optical fiber(PMF Polarization Maintaining Fiber) is used, and is used by electric field measurement, self-discipline measurement, sensor(Sensor) Department by high definition measure such as thermometry and storehouse component that use because make broad sense status and polarized light information in passageway and union with storehouse integrated circuit etc. that use broad sense interference developing could transmit in state that keep transmitting broad sense plane of polarization is polarized light existence. Also, research is developed by optical fiber for Coherent communication recently.

• 조명전기설비학회논문지
• /
• 제27권3호
• /
• pp.1-6
• /
• 2013

In this study, we propose a fiber-optic hydrogen sensor using a polarization-diversity loop configuration composed of a polarization beam splitter, two quarter-wave plates, and a polarization-maintaining fiber coated with palladium whose thickness is ~400nm. One transmission dip of the output interference spectrum of the proposed sensor, chosen as a sensor indicator, was observed to spectrally shift with the increase of the hydrogen concentration, and the sensing indicator showed a wavelength shift of ~2.48nm at a hydrogen concentration of 4%. Except for a hydrogen concentration of 4%, the response time of the proposed sensor was measured as less than 12.5s and did not show significant dependence on the hydrogen concentration. In particular, the proposed fiber hydrogen sensor is more durable and highly resistant to external stress applied on a transverse axis of an optical fiber, compared with other hydrogen sensors based on side-polished fibers or fiber gratings.

• 센서학회지
• /
• 제13권3호
• /
• pp.207-212
• /
• 2004

We have investigated the optical characteristics of a directional coupler made of a side-polished polarization maintaining fiber in contact with a multimode planar waveguide and its applications as sensors. A device structural condition to achieve the polarization insensitive wavelength response has been presented. The fabricated devices revealed a superior immunity to the bending and the deformation of PM fibers in the input section. It is experimentally shown that the proposed device is suitable for a remote fiber sensor.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.33-37
• /
• 2010

In this paper, we have demonstrated absolute wavelength tuning in an optical fiber comb filter based on a polarization-diversity loop configuration by controlling the current injected into enameled wires wound on polarization-maintaining fibers (PMF's), that is, adjusting Joule heat generated from enameled wires. The proposed fiber comb filter consists of a polarization beam splitter, a half-wave plate, a quarter-wave plate, and PMF's. And we observed wavelength change of spectral dips in transmission spectra of the fabricated filter by varying an input current applied to enameled wires. The absolute wavelength of the filter could be controlled in proportional to the square of the input current with good linearity, and the rate of the wavelength shift with respect to the input current was measured as 36.79[nm/$A^2$].

• 조명전기설비학회논문지
• /
• 제29권7호
• /
• pp.1-7
• /
• 2015

In this paper, we demonstrated a polarimetric fiber pressure sensor using a polarization-diversity-loop-based Sagnac interferometer(PDLSI) composed of polarization-maintaining fiber(PMF) and a fiber Bragg grating(FBG). In order to compare the pressure sensitivity for various kinds of PMF, three kinds of bow-tie PMF were employed as sensor heads. The maximum pressure sensitivity was measured as approximately -15.07nm/MPa, and an R2 value to represent sensor linearity was measured as ~0.992 at the sensor system using corresponding PMF over a pressure range of 0-0.3MPa. An FBG was utilized and located adjacent to the PMF segment for compensating temperature-induced errors in the measurement of pressure. The pressure sensitivity of the proposed sensor was improved by approximately four times compared with the previously reported pressure sensor based on polarization-maintaining photonic crystal fiber.

• 한국전자통신학회논문지
• /
• 제10권1호
• /
• pp.133-138
• /
• 2015

편광유지 광결정 광섬유를 이용하여 무게센서를 제작하여 실험을 하였다. 본 논문의 센서시스템은 3 dB 커플러, 반파장판, 광원으로 구성되어진다. 무게가 편광유지 광결정 광섬유에 가해지면 파장이동을 측정한다. 센서감지부로 원형형태와 직선형태의 2 종류로 제작하여 특성을 조사하였다. 직선형태로 이루어진 센서의 감도는 680 pm/kg 였으며, 원형형태로 구성된 센서의 감도는 270 pm/kg 이었다. 두 가지 형태로 제작된 센서는 선형성이 좋았으며, 감도는 직선형태로 이루어진 센서가 좋음을 알 수 있었다.

• 한국광학회지
• /
• 제25권3호
• /
• pp.131-136
• /
• 2014

본 논문에서는 짧은 길이의 편광유지 광자결정 광섬유(polarization-maintaining photonic crystal fiber : 이하 PM-PCF)와 3 dB 광섬유 결합기(fiber coupler), 그리고 편광 조절기(polarization controller)로 구성된 사냑(Sagnac) 복굴절 간섭계(birefringence interferometer)를 이용하여 온도에 둔감한 편광 간섭형 스트레인 센서(polarimetric strain sensor)를 구현하였다. 센서부(sensor head)로 사용된 PM-PCF의 길이는 2 cm이었고, 이는 기존의 PM-PCF 기반 편광 간섭형 스트레인 센서들과 비교할 때 가장 짧은 센서부 길이이다. 제안된 센서는 $0{\sim}8m{\varepsilon}$의 범위에 대해서 스트레인 측정을 수행하였으며, ${\sim}0.87pm/{\mu}{\varepsilon}$에 해당하는 스트레인 민감도를 얻을 수 있었다. 또한, 외부 온도를 $30^{\circ}C$에서 $100^{\circ}C$까지 변화시키며 제안된 센서의 온도 의존성을 조사한 결과, 약 $-12pm/^{\circ}C$의 온도 민감도를 얻을 수 있었으며, 이는 기존의 편광 유지 광섬유의 온도 민감도(약 $-990pm/^{\circ}C$) 에 비해 약 82배정도 작은 값이다. 특히, 실용적인 관점에서 센서 표지자(indicator)로 사용되는 파장이 스트레인 민감도에 큰 영향을 주지 않는다는 것을 실험 및 이론적으로 확인하였다.

• 조명전기설비학회논문지
• /
• 제27권12호
• /
• pp.10-15
• /
• 2013

In this paper, we propose a Lyot-type optical fiber comb filter based on a polarization-diversity loop structure (PDLS), which has flat-top pass bands and multiwavelength switching capability. Generally, the PDLS can remove the dependency of the filter on input polarization. The proposed filter is composed of a polarization beam splitter, two half-wave plates (HWPs), and two polarization-maintaining fiber loops concatenated with a $60^{\circ}$ offset between their principal axes. By controlling two HWPs, it can operate in a flat-top band mode or a lossy flat-top band mode with an inherent insertion loss of ~3.49dB. In particular, flat-top bands can be interleaved in both modes, which cannot be realized in a Lyot-Sagnac comb filter based on a fiber coupler. Compared with Solc-type high-order comb filters with the same order, the proposed filter shows sharper transition between pass and stop bands.

• 한국광학회지
• /
• 제4권4호
• /
• pp.487-492
• /
• 1993

편광유지 광섬유를 이용하여 자이로스코프를 구성하였다. 전체 시스템의 총 광 손실은 약 25dB였으며, 지구자전속도를 기준으로 하여 장기 drift와 단기 잡음을 측정하였다. 장기 drift는 온도변화와 밀접한 관계가 있었으며 약 $3^{\circ}/hr$ 정도의 값을 얻었고, 단기 근 잡음은 약 $0.6^{\circ}/hr/{\sqrt{Hz}}$의 값을 나타내었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.186-187
• /
• 2001

광섬유 브래그 격자를 이용한 고정밀도 센서 시스템은 불균형(unbalanced) 마하 젠더 간섭계를 이용한 interrogation 기법을 많이 사용하고 있다. 그러나 간섭성을 이용한 interrogation 기법은 작은 온도 변화, 진동과 같은 외부 환경 변화에 매우 민감하다 이 논문은 불균형 마하 젠더 간섭계 대신 편광 유지 광섬유 (polarization maintaining fiber , PMF) 루프 미러(loop mirror)를 이용한 interrogation 시스템을 구현하였다. (중략)