• Corrosion Science and Technology
• /
• 제21권1호
• /
• pp.41-52
• /
• 2022

Herein, we report polyvinyl butyral composites coatings containing various loadings of 72-h bath sonicated hexagonal boron nitride particles (5 ㎛) to enhance barrier properties of coatings. Barrier properties of coatings were determined in 3.5 wt% NaCl after different time periods of immersion via electrochemical techniques such as open circuit potential, electrochemical impedance spectroscopy, and potentiodynamic polarization test. Coatings containing sonicated hexagonal boron particles exhibited improved corrosion resistance for longer periods of immersion compared to neat coating. We also discussed effects of hexagonal boron nitride on healing properties of polyvinyl butyral. Coatings containing 1.0 wt% loading of sonicated hexagonal boron nitride showed improved long-term barrier properties than coatings with other compositions. The presence of hexagonal boron nitride also affected the healing properties of polyvinyl butyral coatings besides their barrier properties. Such improved barrier properties of composites coatings were attributed to the high aspect ratio, plate-like shape, and electrically insulated nature of the filler.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.198-198
• /
• 2003

Two microscopic particles irradiated by light field influence each other by the forces coursed by the dipole-dipole interaction. The interaction changes also the resonance frequencies of the particles. We show that the dipole forces between atoms, molecules or dielectric particles irradiated by laser light play an important role at distances between the particles about or less the light wavelength. We discuss the properties of the near-field forces, including their dependence on direction and polarization of the laser light. We conclude that the near-field forces can be responsible for farmation of dimers in dense atomic gases. The near-field forces can be also used for control the motion of dielectric particles on micro and nanometer scale.

• 한국항만학회지
• /
• 제12권1호
• /
• pp.145-154
• /
• 1998

Protection characteristics of the corroded steel pile which was served as a pier structure over 8 years in seawater have been examined in terms of corrosion potential, electrochemical impedance spectroscopy(EIS) and anodic/cathodic polarization curves. The steel structure was sectioned into two parts, waterline(splash zone, just above the seawater surface) and in-water(underwater), and protection characteristics for the two parts were investigated with the application of cathodic protection(CP) by sacrificial anodes using Zn and Al alloys. The main results obtained were as follows; (1) The corrosion potential of waterline zone was higher than that of in-water, which implied that the corrosion of waterline was more severe than that of in-water, (2) As a result of EIS examination, the transition period from the apparent CP to the substantial CP took about twenty to thirty days according to the corrosion condition.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.17-18
• /
• 2021

In the present study, Al-Zn coating was deposited by Arc thermal (AT) and plasma arc thermal (PAT) spray processes, and their corrosion characteristics were studied in 3.5% NaCl through electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM) and mechanical tests. The bond adhesion result showed that plasma arc sprayed coating had a higher value attributed to compact, dense, and less porous coating compared to arc thermal spray coating which contains defects/pores and uneven morphology as revealed by scanning electron microscope analysis. Electrochemical results revealed that the plasma arc sprayed coating had a high polarization resistance at early stage of immersion, suggesting its excellent corrosion protection performance.

• 대한환경공학회지
• /
• 제34권11호
• /
• pp.715-719
• /
• 2012

단위면적당($cm^2$) 루테늄의 코팅량이 1.5 mg, 2.5 mg, 3.5 mg, 5.5 mg, 8.5 mg의 $RuO_2$/Ti 전극을 제조하여 코팅량에 따른 전기화학적 특성 차이와 염소 발생에 미치는 영향을 조사하였다. 순환전압 실험 결과 루테늄이 코팅된 전극의 염소 발생 과전압은 약 1.15 V (vs. Ag/AgCl)로 거의 일정하였다. 그러나 교류 임피던스 분광법, 동전위분극실험 결과 단위면적당($cm^2$) 루테늄의 코팅량이 2.5 mg, 3.5 mg $RuO_2$/Ti 전극의 저항은 각각 $0.4582{\Omega}$, $0.5267{\Omega}$, 부식속도는 각각 0.082 mm/yr, 0.058 mm/yr로 내구성이 가장 우수하였다. 염소 발생량은 단위면적당($cm^2$) 루테늄의 코팅량 3.5 mg 전극이 15.2 mg/L로 가장 높게 측정되었다.

• Korean Chemical Engineering Research
• /
• 제55권1호
• /
• pp.107-114
• /
• 2017

고분자전해질 연료전지(PEMFC: polymer electrolyte membrane fuel cell)는 일산화탄소(CO)나 황화수소($H_2S$)가 포함된 연료가 주입될 경우 성능이 저하된다. 일반적으로 멀캅탄 계열의 부취제가 첨가된 탄화수소를 개질하여 생성된 수소에는 미량의 황화수소가 포함되어 있다. 본 연구에서는 황화수소를 수소에 첨가하여 anode에 주입하였을 경우에 연료전지 성능에 미치는 영향을 파악하고, 3가지 다른 회복방법인 순수 수소 주입법, 전위 순환법과 물 순환법을 적용한 경우의 회복률을 비교하여 보았다. PEMFC의 성능은 전기화학적 방법인 polarization curve, electrochemical impedance spectroscopy (EIS)와 cyclic voltammetry (CV)를 사용하여 분석하였다. 피독에 대한 회복방법인 순수 수소 주입법과 전위 순환법을 사용한 경우에는 회복률이 적었고, 물 순환법을 사용한 경우에는 초기에 대비하여 약 95% 이상 성능이 회복된 것을 확인하였다. 직접적으로 피독에 노출된 anode에 물을 흘린 경우의 성능회복률이 높았으며, cathode에 흘린 경우에도 물의 crossover에 의한 효과로 전위 순환법보다 우수한 회복률을 보였다. 이러한 연구결과로부터 황화수소 피독에 대한 회복기법을 구축함으로서 연료전지의 내구성을 향상시킬 수 있고, 불순물이 미량 함유된 저가 수소의 사용을 가능하게 함으로서 연료전지 보급에도 기여할 수 있을 것이다.

• 전기화학회지
• /
• 제10권4호
• /
• pp.301-305
• /
• 2007

연료전지 운전 중에 스택(stack) 분리판 접착부위나 다른 경로로 부동액이 누설될 경우에는 화학적 반응에 영향을 주어 성능의 저하가 발생할 수 있다. 본 연구에서는 부동액이 누설되었을 경우의 성능 거동을 관찰하는 실험을 수행하였다. $400mA/cm^2$ 전류밀도 조건에서 마이크로 펌프를 이용하여 부동액을 주입하였으며 상대습도 100%/100%와 수소와 공기의 양론비는 1.5/2.0으로 고정하여 실험을 수행하였다. 3 cell stack을 이용하여 부동액을 주입한 후 정전류 회복 실험을 수행한 결과 cathode측에 부동액을 주입하였을 경우에는 성능이 회복되었고 anode측에 부동액을 주입하였을 경우에는 성능이 회복되기 어려운 것으로 나타났다. Anode측이 회복되지 못하는 이유로는 ethylene glycol의 산화반응에서 발생하는 불순물에 의한 피독 현상과 GDL과 3상 계면에 ethylene glycol이 물리적으로 흡착하였을 경우 반응에 필요한 연료 공급의 방해로 인한 성능 저하를 예상할 수 있다. 성능 저하에 영향을 주는 두 가지 변수를 확인하는 실험을 수행하였다. 회복 실험은 anode측에 water pump를 이용하여 질소 기체와 물을 동시에 공급하는 방법으로 실험을 수행하였고, 1시간 간격으로 성능 회복 유무를 확인하였다. 성능 평가는 polarization curve, cyclic voltammetry(CV), electrochemical impedance spectroscopy(EIS)를 사용하였으며, 정량분석은 gas chromatography를 이용하여 분석하였다. 부동액 주입 후 성능은 크게 저하되었고 정전류 회복 실험에서도 성능 회복은 미미하게 나타났다. 이 후 물 주입회복 실험을 수행하였고 회복 실험을 수행한 2시간 이후에는 93% 이상의 회복을 관찰할 수 있었다.

• Journal of Korean Dental Science
• /
• 제11권2호
• /
• pp.71-81
• /
• 2018

Purpose: The purpose of this study was to investigate the corrosion behaviors of dental implant alloy after microsized surface modification in electrolytes containing Mn ion. Materials and Methods: $Mn-TiO_2$ coatings were prepared on the Ti-6Al-4V alloy for dental implants using a plasma electrolytic oxidation (PEO) method carried out in electrolytes containing different concentrations of Mn, namely, 0%, 5%, and 20%. Potentiodynamic method was employed to examine the corrosion behaviors, and the alternatingcurrent (AC) impedance behaviors were examined in 0.9% NaCl solution at $36.5^{\circ}C{\pm}1.0^{\circ}C$ using a potentiostat and an electrochemical impedance spectroscope. The potentiodynamic test was performed with a scanning rate of $1.667mV\;s^{-1}$ from -1,500 to 2,000 mV. A frequency range of $10^{-1}$ to $10^5Hz$ was used for the electrochemical impedance spectroscopy (EIS) measurements. The amplitude of the AC signal was 10 mV, and 5 points per decade were used. The morphology and structure of the samples were examined using field-emission scanning electron microscopy and thin-film X-ray diffraction. The elemental analysis was performed using energy-dispersive X-ray spectroscopy. Result: The PEO-treated surface exhibited an irregular pore shape, and the pore size and number of the pores increased with an increase in the Mn concentration. For the PEO-treated surface, a higher corrosion current density ($I_{corr}$) and a lower corrosion potential ($E_{corr}$) was obtained as compared to that of the bulk surface. However, the current density in the passive regions ($I_{pass}$) was found to be more stable for the PEO-treated surface than that of the bulk surface. As the Mn concentration increased, the capacitance values of the outer porous layer and the barrier layer decreased, and the polarization resistance of the barrier layers increased. In the case of the Mn/Ca-P coatings, the corroded surface was found to be covered with corrosion products. Conclusion: It is confirmed that corrosion resistance and polarization resistance of PEO-treated alloy increased as Mn content increased, and PEO-treated surface showed lower current density in the passive region.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.402.1-402.1
• /
• 2016

The performance of solid oxide fuel cells (SOFCs) is directly related to the electrocatalytic activity of composite electrodes in which triple phase boundaries (TPBs) of metallic catalyst, oxygen ion conducting support, and gas should be three-dimensionally maximized. The distribution morphology of catalytic nanoparticle dispersed on external surfaces is of key importance for maximized TPBs. Herein in situ grown nickel nanoparticle onto the surface of fluorite oxide is demonstrated employing gadolium-nickel co-doped ceria ($Gd0.2-xNixCe0.8O2-{\delta}$, GNDC) by reductive annealing. GNDC powders were synthesized via a Pechini-type sol-gel process while maximum doping ratio of Ni into the cerium oxide was defined by X-ray diffraction. Subsequently, NiO-GNDC composite were screen printed on the both sides of yttrium-stabilized zirconia (YSZ) pellet to fabricate the symmetrical half cells. Electrochemical impedance spectroscopy (EIS) showed that the polarization resistance was decreased when it was compared to conventional Ni-GDC anode and this effect became greater at lower temperature. Ex situ microstructural analysis using scanning electron microscopy after the reductive annealing exhibited the exsolution of Ni nanoparticles on the fluorite phases. The influence of Ni contents in GNDC on polarization characteristics of anodes were examined by EIS under H2/H2O atmosphere. Finally, the addition of optimized GNDC into the anode functional layer (AFL) dramatically enhanced cell performance of anode-supported coin cells.

• 한국표면공학회지
• /
• 제50권3호
• /
• pp.147-154
• /
• 2017

This research was conducted to investigate the electrochemical properties of the thin air-formed oxide film-covered AZ31 Mg alloy. Native air-formed oxide films on AZ31 Mg alloy samples were prepared by knife-abrading method and the changes in the electrochemical properties of the air-formed oxide film were investigated in seven different electrolytes containing the following anions $Cl^-$, $F^-$, $SO{_4}^{2-}$, $NO_3{^-}$, $CH_3COO^-$, $CO{_3}^{2-}$, and $PO{_4}^{3-}$. It was observed from open circuit potential (OCP) transients that the potential initially decreased before gradually increasing again in the solutions containing only $CO{_3}^{2-}$ or $PO{_4}^{3-}$ ions, indicating the dissolution or transformation of the native air-formed oxide film into new more protective surface films. The Nyquist plots obtained from electrochemical impedance spectroscopy (EIS) showed that there was growth of new surface films with immersion time on the air-formed oxide film-covered specimens in all the electrolyte. The least resistive surface films were formed in fluoride and sulphate baths whereas the most protective film was formed in phosphate bath. The potentiodynamic polarization curves illustrated that passive behaviour of AZ31 Mg alloy under anodic polarization appears only in $CO{_3}^{2-}$, or $PO{_4}^{3-}$ ions containing solutions and at more than $-0.4V_{Ag/AgCl}$ in $F^-$ ion containing solution.