• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.4
• /
• pp.45-51
• /
• 2020

The poisson's ratio was obtained from the effective vertical stress and horizontal stress of consolidation-undrained test. It was analyzed void ratio verse poisson's ratio. At the result, the effective friction angle was increase with relative density increased, was decreased the poisson's ratio. The empirical equation of void ratio and poisson's ratio was showed very high correlation r²=0.846. The empirical equation was showed that the smaller the void ratio in the fine grained soil than granular soil. In the case of 0.85 times the correlation analysis equation of granular and fine grained soil, the experimental results were shown very similarly. In especially, the poisson's ratio prediction results was shown within 5% of the error range, was revalidation 0.85 times the correlation analysis equation using the void ratio. In this study, correlation analysis equation of the granular and fine grained soil was more reliability of the poisson's ratio prediction results apply to the void ratio than dry unit weight.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.6
• /
• pp.586-590
• /
• 2009

Poisson's ratio, one of elastic constants of elastic solids, has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Rigid couplants for transverse wave is one of obstacle for scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was applied. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected, and transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio was determined without the information of specimen thickness. Poisson's ratio distribution of the carbon steel weldment was mapped. Heat affected zone of the weldment was clearly distinguished from base and filler metals.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.694-697
• /
• 2003

Materials with specific micro-structural shape can exhibit negative Poisson's ratio. These materials can be widely used in structural applications because of their high resilience and resistance to impact. Specially, in the field of artificial implant's material, they have many potential applications. In this study, we investigated the Poisson's ratio and the ratio(E$_{e}$/E) of the elastic modulus of rotational particle structures based on structural design variables using finite element method. As the ratio of fibril's length to particle's diameter increased and the ratio of fibril's diameter to fibril's length decreased fixing the fibril's angle with 45 degree. the negative Poisson effect of rotational particle structures increased. The ratio of elastic modulus of these structures decreased with Poisson's ratio. The results show the reasonable values as compared with the previous analytical results.s.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.2
• /
• pp.619-631
• /
• 2006

When X and Y have independent Poisson distributions, we develop a Bayesian one-sided testing procedures for the ratio of two Poisson means. We propose the objective Bayesian one-sided testing procedures for the ratio of two Poisson means based on the fractional Bayes factor and the intrinsic Bayes factor. Some real examples are provided.

• 한국데이터정보과학회:학술대회논문집
• /
• 2006.04a
• /
• pp.295-306
• /
• 2006

When X and Y have independent Poisson distributions, we develop a Bayesian one-sided testing procedures for the ratio of two Poisson means. We propose the objective Bayesian one-sided testing procedures for the ratio of two Poisson means based on the fractional Bayes factor and the intrinsic Bayes factor. Some real examples are provided.

• Computers and Concrete
• /
• v.32 no.3
• /
• pp.303-311
• /
• 2023

An analysis of the Poisson's ratios influence of single walled carbon nanotubes (SWCNTs) based on Sander's shell theory is carried out. The effect of Poisson's ratio, boundary conditions and different armchairs SWCNTs is discussed and studied. The Galerkin's method is applied to get the eigen values in matrix form. The obtained results shows that, the decrease in ratios of Poisson, the frequency increases. Poisson's ratio directly measures the deformation in the material. A high Poisson's ratio denotes that the material exhibits large elastic deformation. Due to these deformation frequencies of carbon nanotubes increases. The frequency value increases with the increase of indices of single walled carbon nanotubes. The prescribe boundary conditions used are simply supported and clamped simply supported. The Timoshenko beam model is used to compare the results. The present method should serve as bench mark results for agreeing the results of other models, with slightly different value of the natural frequencies.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.6
• /
• pp.519-523
• /
• 2008

Poisson's ratio is one of elastic constants of elastic solids. However, it has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Hard couplant for transverse wave prevents transducer from scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was proposed. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected. Transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio can be determined without information of specimen thickness. This technique was demonstrated for aluminum and steel specimens.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.317-323
• /
• 2017

Due to the unique characteristic of auxetic material, negative poisson's ratio, it has a variety of distinctive properties compared to conventional materials. Numerous researches have been conducted on the auxetic material in order to find out how to make auxetics. In this study, we analyzed triangular and rectangular patterned rotating rigid units using finite element method. Our purpose is to investigate the mechanical properties of the rotating rigid units and to show their auxetic behaviors. We studied the Poisson's ratio and the bulk modulus of the rotating rigid units depending on their unit cell sizes. The Poisson's ratio and the bulk modulus decreased as the number of unit cells increased. Also, when the geometry of the unit cell was changed, the tendency of the Poisson's ratio and the bulk modulus was also different from the previous case. The results of the Poisson's ratio and the bulk modulus referred that they were critically affected by the number of unit cells and the shape of unit cell.

• Journal of Biosystems Engineering
• /
• v.20 no.2
• /
• pp.133-140
• /
• 1995

The model of Poisson's ratio of the fruits was developed on the basis that the cylindrical fruits specimen became the barrel shape when it was being compressed. The model of the corrected creep compliance of the fruits was developed under considering the developed model of Poisson's ratio. Both of the Poisson's ratio and the corrected creep compliance of the samples showed the nonlinear viscoelastic behavior. Those models were a similar form, but their coefficients of the model were different, and these behaviors of the samples were well described by the nonlinear model as a function of the initial stress and time. Effects of storage condition and period on the Poisson's ratio of the samples were investigated, and comparisons between the corrected and the uncorrected creep compliance of the samples were made.

• The Journal of Engineering Geology
• /
• v.6 no.2
• /
• pp.103-110
• /
• 1996

This study shows the variation of poisson's ratio according to stress for the Cretaceous sandstones and shale in the Euiseoung Subbasin. To make a mechanical experiment, samples prepared with 3.0 cm in diameter and 6.2 cm in length were used in testing stress and strain. Generally poisson's ratio has been considered as one of properties, but contrary to steel, the test result makes sure that poisson's ratio has functional relation to stress. I had used four methods to calculate poisson's ratio, Poisson's ratio shows considerable different results according to the calculating, method but it has similar tendency in an elastic limit. Poisson' s ratio increases rapidly and is distinguished clearly in internal fracture region according to the calculating method. Poisson's ratio of sandstone and shale is different from one another in low and high stress regimes,but it is linearly proportional to the stress in an elastic regimes, that is, ${\nu}_t={\;}{\nu}_0+P_{\sigma}({\nu}_0$:first stage Poisson's ratio, ${\nu}_t$:poisson's ratio, P: poisson's coefficient, $\sigma$:stress). Poisson's ratios of two kinds of rock samples show continuous variation from 0.1 to 0.21 in an elastic regime. The variation of poisson's ratio is much wider in an internal fracture regine. It varies from 0.22 to 0.45 in sandstone, which is out of elastic regime.