• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.111-121
• /
• 2010

Purpose: This 3D-FEA study was performed to investigate the influence of marginal bone loss pattern around the implant to the stress distribution. Material and methods: From the right second premolar to the right second molar of the mandible was modeled according to the CT data of a dentate patient. Teeth were removed and an implant ($\Phi\;4.0{\times}10.0mm$) was placed in the first molar area. Twelve bone models were created; Studied bone loss conditions were horizontal bone loss and vertical bone loss, assumed bone loss patterns during biologic width formation, and pathologic vertical bone loss with or without cortification. Axial, buccolingual, and oblique force was applied independently to the center of the implant crown. The Maximum von Mises stress value and stress contour was observed and von Mises stresses at the measuring points were recorded. Results: The stress distribution patterns were similar in the non-resorption and horizontal resorption models, but differed from those in the vertical resorption models. Models assuming biologic width formation showed altered stress distribution, and weak bone to implant at the implant neck area seams accelerates stress generation. In case of vertical bone resorption, contact of cortical bone to the implant may positively affect the stress distribution.

• Progress in Medical Physics
• /
• v.14 no.2
• /
• pp.90-98
• /
• 2003

Purpose : A new virtual simulation technique for craniospinal irradiation (CSI) that uses a CT-simulator was developed to improve the accuracy of field and shielding placement as well as patient positioning. Materials and Methods : A CT simulator (CT-SIM) and a 3-D conformal radiation treatment planning system (3D-CRT) were used to develop CSI. The head and neck were immobilized with a thermoplastic mask while the rest of the body was immobilized with a Vac-Loc. A volumetric image was then obtained with the CT simulator. In order to improve the reproducibility of the setup, datum lines and points were marked on the head and body. Virtual fluoroscopy was performed with the removal of visual obstacles, such as the treatment table or immobilization devices. After virtual simulation, the treatment isocenters of each field were marked on the body and on the immobilization devices at the conventional simulation room. Each treatment fields was confirmed by comparing the fluoroscopy images with the digitally reconstructed radiography (DRR) and digitally composited radiography (DCR) images from virtual simulation. Port verification films from the first treatment were also compared with the DRR/DCR images for geometric verification. Results : We successfully performed virtual simulations on 11 CSI patients by CT-SIM. It took less than 20 minutes to affix the immobilization devices and to obtain the volumetric images of the entire body. In the absence of the patient, virtual simulation of all fields took 20 min. The DRRs were in agreement with simulation films to within 5 mm. This not only reducee inconveniences to the patients, but also eliminated position-shift variables attendant during the long conventional simulation process. In addition, by obtaining CT volumetric image, critical organs, such as the eyes and the spinal cord, were better defined, and the accuracy of the port designs and shielding was improved. Differences between the DRRs and the portal films were less than 3 m in the vertebral contour. Conclusion : Our analysis showed that CT simulation of craniospinal fields was accurate. In addition, CT simulation reduced the duration of the patient's immobility. During the planning process. This technique can improve accuracy in field placement and shielding by using three-dimensional CT-aided localization of critical and target structures. Overall, it has improved staff efficiency and resource utilization by standard protocol for craniospinal irradiation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.1-12
• /
• 2005

Image registration is a process to establish the spatial correspondence between images of the same scene, which are acquired at different view points, at different times, or by different sensors. This paper presents a new algorithm for robust registration of the images acquired by multiple sensors having different modalities; the EO (electro-optic) and IR(infrared) ones in the paper. The two feature-based and intensity-based approaches are usually possible for image registration. In the former selection of accurate common features is crucial for high performance, but features in the EO image are often not the same as those in the R image. Hence, this approach is inadequate to register the E0/IR images. In the latter normalized mutual Information (nHr) has been widely used as a similarity measure due to its high accuracy and robustness, and NMI-based image registration methods assume that statistical correlation between two images should be global. Unfortunately, since we find out that EO and IR images don't often satisfy this assumption, registration accuracy is not high enough to apply to some applications. In this paper, we propose a two-stage NMI-based registration method based on the analysis of statistical correlation between E0/1R images. In the first stage, for robust registration, we propose two preprocessing schemes: extraction of statistically correlated regions (ESCR) and enhancement of statistical correlation by filtering (ESCF). For each image, ESCR automatically extracts the regions that are highly correlated to the corresponding regions in the other image. And ESCF adaptively filters out each image to enhance statistical correlation between them. In the second stage, two output images are registered by using NMI-based algorithm. The proposed method provides prospective results for various E0/1R sensor image pairs in terms of accuracy, robustness, and speed.

• Korean Journal of Social Welfare
• /
• v.57 no.4
• /
• pp.147-175
• /
• 2005

Efforts to identify the public's perception of social welfare as an academic discipline have never been conducted in Korea since the establishment of social welfare department in 1947 at Ewha Womans University. Such efforts are very meaningful in identifying directions and tasks to strengthen Korean social welfare as well as in clarifying and promoting our understanding concerning status of the academic discipline. This study attempts to explore and describe the degree of the public's perception in Korea with analyzing data surveyed in 2004 by our interdisciplinary research team. This study develops and uses a questionnaire having a Likert scale format that is composed of 8 points and measures the public's perception in the following dimensions: (1) personal interests on academic discipline; (2) contribution of academic discipline; (3) prospect of academic discipline; (4) importance of academic discipline; (5) expertise of academic discipline; and (6) personal knowledge on academic discipline. To avoid social desirability and promote objectivity with comparative measurement, this study selects ten representative academic disciplines as follows: medicine; physics; biology; social welfare; economics; psychology; sociology; political science; library science; and communication & journalism. This study attempts to identify (1) the degree of the public's perception on ten academic disciplines; (2) the position of social welfare by comparing it with each academic discipline and by comparing mean of social welfare with overall mean of six social science disciplines in the six dimensions; (3) the differences in the public's perceptions of social welfare on six dimensions by the respondents' status factor(high school students, college and graduate students, and citizens) and gender factor by using MANCOVA, and (4) the differences in the public's perceptions of social welfare on six dimensions by major factor(social welfare, social science majors, and natural science majors) and gender factor of college and graduate school students by using MANCOVA. The results of data analysis are as follows: (1) while the 3,319 respondents gave relatively high rating on natural sciences in the dimensions of contribution and expertise, they did the same on social sciences in the dimensions of personal interests and personal knowledge; (2) in overall comparisons, while the 3,319 respondents gave relatively high rating on social welfare in the dimensions of contribution, prospect and importance, they gave the lowest rating on the expertise of social welfare; (3) in the comparisons with social science disciplines, while the 3,319 respondents gave relatively high rating on social welfare in the dimensions of contribution, prospect and importance, they gave the lowest rating on the expertise of social welfare; (4) when analyzing all the respondents, there were differences in the vector of personal interests, contribution, prospect, importance, expertise, and personal knowledge by status factor, gender factor, and interaction effect factor; and (5) when analyzing only the respondents in college and graduate schools, there were differences in the vector of personal interests, contribution, prospect, importance, expertise, and personal knowledge by only major factor and gender factor. The results provide empirical backgrounds for discussing current image, status and major characteristics of social welfare as a discipline in Korea. Indeed, this study provides new meaningful and thoughtful guide for further investigation on the topic. In addition, contributing to clarifying and broadening our understandings about the public's perception on social welfare in Korea, this study discusses the tasks for dealing with expertise issue that is the most vulnerable issue of Korean social welfare discipline and research directions to strengthen and promote social welfare discipline in Korea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.316-323
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of different thread designs on the marginal bone stresses around dental implant. Materials and methods: Standard ITI implant(ITI Dental Implant System; Straumann AG, Waldenburg, Switzerland), 4.1 mm in diameter and 10 mm in length, was selected as control. Test implants of four different thread patterns were created based on control implant, i.e. maintaining all geometrical design of control implant except thread pattern. Four thread designs used in test implants include (1) small V-shape screw (model A), (2) large V-shape screw (model B), (3) buttress screw (model C), and (4) trapezoid screw (model D). Surface area for unit length of implant was 14.4 $mm^2$ (control), 21.7 (small V-shape screw), 20.6 (large V-shape screw), 17.0 (buttress screw) and 28.7 $mm^2$ (trapezoid screw). Finite element models of implant/bone complex were created using an axisymmetric scheme with the use of NISA II/DISPLAY III (Engineering Mechanics Research Corporation, Troy, MI, USA). A load of 100 N applied to the central node on the crown top either in parallel direction or at 30 degree to the implant axis (in order to apply non-axial load to the implant NKTP type 34 element was employed). Quantification and comparison of the peak stress in the marginal bone of each implant model was made using a series of regression analyses based on the stress data calculated at the 5 reference points which were set at 0.2, 0.4, 0.6, 0.8 and 1.0 mm from implant wall on the marginal bone surface. Results: Results showed that although severe stress concentration on the marginal bone cannot be avoided a substantial reduction in the peak stress is achievable using different thread design. The peak marginal bone stresses under vertical loading condition were 7.84, 6.45, 5.96, 6.85, 5.39 MPa for control and model A, B, C and D, respectively. And 29.18, 26.45, 25.12, 27.37, 23.58 MPa when subject to inclined loading. Conclusion: It was concluded that the thread design is an important influential factor to the marginal bone stresses.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.185-192
• /
• 2008

Purpose: This study was designed to investigate the fitness of adjustable dental impression trays on the Caucasian and African American. Material and methods: The size and shape of these trays were designed from the results of the dental arch size of Korean adults. Tray samples were made by CAD-CAM working. Sixty Caucasian (male:30, female:30) and sixty African American (male:30, female:30) were selected for taking irreversible hydrocolloid impression using these trays. The author measured the width and length of impression material on the several measuring points. Results: 1. Uniform impression material width was achieved by controling the width of the tray using stops and beveled guides. 2. In the maxillary tray on the Caucasian, the impression material thickness was measured to be rather great showing thickness of the midpalatal part 13.0 mm. 3. In the maxillary tray on the African American, the impression material thickness was measured to be rather great showing thickness of the midpalatal part 12.0 mm, posterior palatal part 11.0 mm and the labial frenum width was 11.0 mm. 4. In the maxillary tray on the African American, the impression material width of posterior border (0.8 mm) was measured to be small. 5. In the mandibular tray on the Caucasian, the impression material width was measured (2.7-6.7 mm) and posterior border width (2.1 mm) was measured small. The impression material length was measured (2.8-6.7 mm). 6. In the mandibular tray on the African American, the impression material width was measured to be rather great showing width of the labial frenum 9.2 mm and the width of posterior border was measured too small (0.3 mm). Conclusion: This adjustable dental tray shows good accuracy to Korean because it was designed by the analysis of the dental arch size of Korean adult model. With this result, it can be applied to Caucasian and African American, we can take more easy and accurate dental impressions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.175-184
• /
• 2008

Purpose: This study was designed to investigate the fitness of adjustable dental impression trays on the Chinese and the Japanese. Material and methods: Initial design of the adjustable dental trays was developed from the results of the dental arch size of Korean adults. This design was applied to the CAD-CAM process in order to create tray model samples. Simple silicon-base molds were then replicated based on these sample models. Polyurethane injection into the silicon- base molds completed the process of creating a large number of test products. 60 Chinese dental students (male:30, female:30) from the Shanghai Second Medical University and 60 Japanese alumni from the Kumamoto high school (male:30, female:30) were selected for taking irreversible hydrocolloid impression with these trays. The width and length of the impression body were measured on several measuring points by Vernier caliper. The results were analyzed statistically to evaluate the fitness of the trays. Results: 1. Uniform impression material thickness was achieved on the Chinese and Japanese by controlling the width of the tray using stops and beveled guides. The material thickness was generally within the range of 3 mm to 6 mm. 2. In the maxillary tray of the Chinese, average thickness of the impression material of the labial vestibule of the incisal teeth was 6.2 mm, the canine was 5.9 mm and the midpalatal part 10.5 mm and the posterior palatal part 9.7 mm. These were relatively large values. 3. In the mandibular tray of the Chinese, average length of the impression material of the lingual vestibule of first, second premolar contact point was 8.9 mm, the incisal teeth was 7.8 mm and thickness of the labial part of canine was 6.8 mm and premolars 7.0 mm. These were relatively large values. 4. In the maxillary tray of the Japanese, average thickness of the impression material of the labial vestibule of the incisal teeth was 7.4 mm, the canine was 7.7 mm and the midpalatal part 9.1 mm. These were relatively large values. 5. In the mandibular tray of the Japanese, average thickness of the impression material of the labial vestibule of first, second premolar contact point was 8.4 mm, and thickness of the labial part of canine was 7.4 mm. These were relatively large values. Conclusion: This adjustable dental tray shows good accuracy to Korean because it was designed by the analysis of the dental arch size of Korean adult model. With this result, it can be applied to Chinese and Japanese, we can take more easy and accurate dental impressions.

• Journal of Society of Preventive Korean Medicine
• /
• v.5 no.1
• /
• pp.41-56
• /
• 2001

Overview: The purpose of this study was to evaluate the determinants on the correlation between constitution and health promoting lifestyle profile on the workers. Also, the questionnaire on the HPLP (health promoting lifestyle profile) of Walker(1987) and Sa-sang constitution of Lee(l894) were utilized Methods: Data from a representative sample of 652 workers were analyzed Pearson's chi-square test analysis was utilized to test the explanatory causal model and to determine the direct and indirect effects of independent variables on quality of life. Results: Constitutional distribution among exposed group, were Tae-eum In(43.7%), So-eum In(33.6%), and So-yang In(22.7%). The degree of the subjects practicing health promoting lifestyle, on a scale of 1 to 4, is an average of 2.62, personal relations 2.94, self-realization 2.86, stress management 2.71, nutrition 2.68, responsibility for health 2.37, and exercise 2.21, with personal relations earning the highest points and exercise the lowest As for factors influencing health promoting lifestyle, there is significant difference between sex and age. That is female and higher age. On the difference between constitution and health promoting lifestyle, Tae-eum In is the highest all area except personal relations. So-eum In is the lowest all area except responsibility for health. Conclusions: Tae-eum In totally do health promoting lifestyle well but So-eum In relatively not. On the Study we used the HPLP(health promoting lifestyle profile) on the premise that each person's daily life, the attitude and the practice level to the health have an influence on the health. So in the constitution there is a little differences in the consideration and the practice level and health condition will be different. On this study we finish up by knowing about the health promoting lifestyle. But on next time we will have to go on studying about the sign and the comparison with the result of western and oriental medical health examination to the each constitution on carrying out continuously oriental medical health examination.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.2
• /
• pp.155-160
• /
• 2009

Purpose: The purpose of this study was to evaluate the pain recovery pattern according to the integrity and to analyze the factors affecting the progress and level of pain postoperatively. Materials and Methods: We examined 153 patients, who were treated with arthroscopic rotator cuff repair. 101 rotator cuff tears were full-thickness tear and 52 were partial tear. The mean follow up duration was 20 months (12~30 months). We evaluated the visual analogue scale, range of motion, ASES (American Shoulder and Elbow Surgeons), and UCLA (University of California at Los Angeles) scores preoperatively and postoperatively. We analyzed the pain recovery pattern between partial and full thickness tear using Student T-test and the factors affecting the progress and level of postoperative pain using multiple regression analysis. Results: The change patterns of visual analogue scale after arthroscpoic repair were similar regardless of the tear integrity. The VAS showed a continuous decreasing pattern, but increased at first 3 weeks postoperatively and at 7 weeks postoperatively, and then, decreased thereafter. The average VAS was ${\leqq}2$ points by postoperative 3 months. The factor affecting the pain score at 3 months was related to the preoperative limitation in forward flexion ($r^2=0.377$, p=0.021). Conclusion: There was no differences of the pain recovery pattern according to the integrity, and the factor affecting the progress of postoperative pain was preoperative angle of forward elevation. So, the appropriate preoperative rehabilitation protocol that can improve motions of the shoulder joint would help to improve the level of postoperative pain and functional recovery.

• (The) Korean Journal of Educational Psychology
• /
• v.32 no.1
• /
• pp.99-130
• /
• 2018

The purpose of this study was to examine the longitudinal relationship between resilience and social support of school violence exposure types including school bullying, victimization, and dual experience. The study used data obtained from the third year (2012) of the Seoul Education Longitudinal Study of 1,137 elementary school students in grade 6 who reported experiencing school violence. The results of the autoregressive cross-lagged model are as follows. First, as a result of measuring the self-regression coefficients of resilience and social support of the youth exposed to school violence at 3 time points (2012, 2014, and 2016), it was found for all types of violence that resilience and social support at the previous time point showed a signigicant positive effect on the same variable at the next time point. Second, in the case of the cross-lagged effects of resilience and social support, the effect of previous social support on resilience at the next time point was statistically significant for the victimization group, but not for the bullying or dual experience groups. Third, considering the opposite path from resilience to social support, resilience at the previous time point had a significant influence on the social support at the next time point for both the bullying and victimization groups. This result is new and can be complementary to the cross-sectional studies so far using a longitudinal view. The results of this study suggest that the bullying and victimized students who are relatively more resilient are less likely to perceive social support than those who are not resilient. Finally, we discuss the longitudinal relationship between resilience and social support, the limitations of this study, and implications for future research.