• Korean Journal of Remote Sensing
• /
• v.39 no.5_2
• /
• pp.849-858
• /
• 2023

Investigating disaster sites such as earthquakes and landslides involves significant risks due to potential secondary disasters like facility collapse. In situations where direct access is challenging, there is a need to develop methods for safely acquiring high-precision 3D disaster information using light detection and ranging (LiDAR) equipped drone survey systems. In this study, the feasibility of using drone LiDAR in disaster scenarios was examined, focusing on the collapse accident at Jeongja Bridge in Bundang-gu, Seongnam City, in April 2023. High-density point clouds for the accident bridge were collected, and the bridge's 3D terrain information was reconstructed and compared to the measurement performance of 10 ground control points. The results showed horizontal and vertical root mean square error values of 0.032 m and 0.055 m, respectively. Additionally, when compared to a point cloud generated using ground LiDAR for the same target area, a vertical difference of approximately 0.08 m was observed, but overall shapes showed minimal discrepancies. Moreover, in terms of overall data acquisition and processing time, drone LiDAR was found to be more efficient than ground LiDAR. Therefore, the use of drone LiDAR in disaster sites with significant risks allows for safe and rapid onsite investigations.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.6
• /
• pp.1099-1110
• /
• 2023

The recognition system of autonomous driving and robot navigation performs vision work such as object recognition, tracking, and lane detection after multi-sensor fusion to improve performance. Currently, research on a deep learning model based on the fusion of a camera and a lidar sensor is being actively conducted. However, deep learning models are vulnerable to adversarial attacks through modulation of input data. Attacks on the existing multi-sensor-based autonomous driving recognition system are focused on inducing obstacle detection by lowering the confidence score of the object recognition model.However, there is a limitation that an attack is possible only in the target model. In the case of attacks on the sensor fusion stage, errors in vision work after fusion can be cascaded, and this risk needs to be considered. In addition, an attack on LIDAR's point cloud data, which is difficult to judge visually, makes it difficult to determine whether it is an attack. In this study, image scaling-based camera-lidar We propose an attack method that reduces the accuracy of LCCNet, a fusion model (camera-LiDAR calibration model). The proposed method is to perform a scaling attack on the point of the input lidar. As a result of conducting an attack performance experiment by size with a scaling algorithm, an average of more than 77% of fusion errors were caused.

• Journal of the Daesoon Academy of Sciences
• /
• v.39
• /
• pp.33-67
• /
• 2021

This paper aims at revealing the core concept of Injon (Human Nobility). The concept of Injon is one of the salient fundamental ideas which makes Daesoon Jinrihoe recognizable as Daesoon Jinrihoe. The concept of Injon has the basic meaning of 'human nobility,' but within the context wherein the nobility of humankind is considered to be greater than the nobility of Heaven and Earth. Although the religious and ideological interpretations of Injon (human nobility) that have developed over time have been quite diverse and abundant, these interpretations are all limited in that they generally assume the relationship between 'Heaven and Earth' and 'Humanity' to be antagonistic. However, if human nobility is relativized in that manner, it can reduce the potential broader meanings of mutual beneficence and the earthly paradise of the later world. These interpretations are grounded in the view of semiotic interpretation. Such interpretations have composed their view point via the semiotic meaning of the words. The semiotic point of view suggests that meanings of words consist in the relation of the word and the object to which it denotes. We will introduce a new view point which can be termed the transcendental view point. This view focuses on how the exact interpretation of words and sentences depends on the comprehension of the triad of systematic relations among the word, object, and speaker. In the Daesoon Thought, the Former World is considered to be the world wherein all creations unfolded according to the principle of mutual contention. This led to the accumulation of grievances and grudges which condensed and filled the Three Realms of Heaven, Earth, and Humanity. The Former World was dominated by Western material civilization, selfishness, and exclusivism. It was also a world where humans suffered from various natural disasters such as floods, droughts, plagues, and wildfires. The Former World lost the constant Dao and was overwhelmed with all kinds of disasters and calamities. That world fell into various kinds of wretchedness. The causes which made the Former World so cruel came from humans misunderstanding their relation to nature and life in general; including human life. The anthropocentric modern cosmology insisted that the human race was the only one to have the powers and rights to exercise dominion over nature. On the other hand, there is the Later World, which means the ideal and perfect, immanent eternal world for all humankind in Daesoon Thought. This world consists of life, peace, and equality and is also characterized by three typical attributes: goodness, peace, and all kinds of life. All living beings previously struggled for survival, but in the Later World, those lifeforms will embrace each other; even across different realms. In Daesoon Thought, the world and cosmos contain diverse forms of life, and human have both an earthly life and life in the after world should they die before the Later World. There are also the lives of divine beings and animals, and other such living entities. Daesoon Thought subsumes pan-vitalism, which allows they acknowledgement of myriad possible lifeforms. The concept of the Later World in Daesoon Thought, which mainly revealed in The Canonical Scripture and the words of Sangje (Kang Jeungsan), suggests that all kinds of life, including humans, animals, and even spirits in the afterworld, can live together in a perfect coming earthly paradise which is immanent. The concept of Injon can be interpreted though the view of transcendental pragmatics as an alternative to the typical views discussed in Daesoon Thought. Thinkers should attempt to improve current discourse on Injon in Daesoon Thought by focusing on the point that all kinds the original teachings demonstrate a value of all lifeforms. Therein, Injon would indicate not only the human nobility and dignity but also the nobility and dignity of divine beings, divine humans, and all other forms of life that have existed across time. The dimension of time allows for recognition of lifeforms from the Former World, the afterworld, and the Later World. This revised appraisal of Injon could further accommodate denizens of the afterworld, animals, ghosts and spirits, the earth and cloud souls of humans, and other lifeforms held to exist in the cosmology of Daesoon Thought.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.4
• /
• pp.149-161
• /
• 2019

At present, we are at the point of change of the 4th industrial revolution era due to the development of artificial intelligence(AI) and rapid technological innovation that no one can predict until now. This study started from the question of 'What role should home economics education play in the era of the Fourth Industrial Revolution?'. The Fourth Industrial Revolution is characterized by AI, cloud computing, Internet of Things(IoT), big data, and Online to Offline(O2O). It will drastically change the social system, science and technology and the structure of the profession. Since the dehumanization of robots and artificial intelligence may occur, the 4th Industrial Revolution Education should be sought to foster future human resources with humanity and citizenship for the future community. In addition, the implication of education in the fourth industrial revolution, which will bring about a change to a super-intelligent and hyper-connected society, is that the role of education should be emphasized so that humans internalize their values as human beings. Character education should be established as a generalized and internalized consciousness with a concept established in the integration of the curriculum, and concrete practical strategies should be prepared. In conclusion, home economics education in the 4th industrial revolution era should play a leading role in the central role of character education, and intrinsic improvement of various human lives. The fourth industrial revolution will change not only what we do, or human mental and physical activities, but also who we are, or human identity. In the information society and digital society, it is important how quickly and accurately it is possible to acquire scattered knowledge. In the information society, it is required to learn how to use knowledge for human beings in rapid change. As such, the fourth industrial revolution seeks to lead the family, organization, and community positively by influencing the systems that shape our lives. Home economics education should take the lead in this role.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.90-104
• /
• 2008

Laser scanning technology with high positional accuracy and high density will be widely applied to vast range of fields including geomatics. Especially, the development of laser scanning technology enabling long range information extraction is increasing its full use in civil engineering. This study taps into the strengths of a terrestrial laser scanning technique to develop a tunnel cross section management system that can be practically employed for determining the cross section of tunnels more promptly and accurately. Three dimensional data with high density were obtained in a prompt and accurate manner using a terrestrial laser scanner. Data processing was then conducted to promptly determine arbitrary cross sections at 0.1meter, 0.5meter and 1.0meter intervals. A laser scanning technique was also used to quickly and accurately calculate the overbreak and underbreak of both each cross section and the entire tunnel section. As the developed system utilizes vast amounts of data, it was possible to promptly determine the shape of arbitrary cross section and to calculate the overbreak and underbreak more accurately with higher area precision. It is expected, therefore, that the system will not only enable more efficient and cost effective tunnel drilling management and monitoring but also will provide a basis for future construction and management of tunnel cross section.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.9-18
• /
• 2015

In this paper, we verify the optimal topology design for heat conduction problems in steady stated which is obtained numerically using the adjoint design sensitivity analysis(DSA) method. In adjoint variable method(AVM), the already factorized system matrix is utilized to obtain the adjoint solution so that its computation cost is trivial for the sensitivity. For the topology optimization, the design variables are parameterized into normalized bulk material densities. The objective function and constraint are the thermal compliance of the structure and the allowable volume, respectively. For the experimental validation of the optimal topology design, we compare the results with those that have identical volume but designed intuitively using a thermal imaging camera. To manufacture the optimal design, we apply a simple numerical method to convert it into point cloud data and perform CAD modeling using commercial reverse engineering software. Based on the CAD model, we manufacture the optimal topology design by CNC.

• Journal of Broadcast Engineering
• /
• v.21 no.1
• /
• pp.36-42
• /
• 2016

Recently, many 3D contents have been produced through the multiview camera system. In this system, since a difference of the viewpoint between color and depth cameras is inevitable, the camera parameter plays the important role to adjust the viewpoint as a preprocessing step. The conventional camera calibration method is inconvenient to users since we need to choose pattern features manually after capturing a planar chessboard with various poses. Therefore, we propose a semi-auto camera calibration method using a circular sampling and an homography estimation. Firstly, The proposed method extracts the candidates of the pattern features from the images by FAST corner detector. Next, we reduce the amount of the candidates by the circular sampling and obtain the complete point cloud by the homography estimation. Lastly, we compute the accurate position having the sub-pixel accuracy of the pattern features by the approximation of the hyper parabola surface. We investigated which factor affects the result of the pattern feature detection at each step. Compared to the conventional method, we found the proposed method released the inconvenience of the manual operation but maintained the accuracy of the camera parameters.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_2
• /
• pp.1151-1157
• /
• 2017

Street Trees is an important object for urban environment improvement. Especially the height of the trees needs to be precisely measured as a factor that greatly influences the removal of air pollutants in the Urban Street Canyons. In this study, we extracted the height of the tree based on the stereo image using the precisely adjusted UAV Images of the target area. The adjustment of UAV image was applied photogrammetric SfM (Structure from motion) based on the collinear condition. We measured the height of the trees on the Street Canyon using stereoscopic vision on stereo plotting system. We also acquired the height of the building adjacent to the street trees and the average height of the road surface was calculated for accurate measurement of the height of each object. Through the visual analysis with the plotting operation system, it was possible to measure height of the tree and to calculate the relative height difference value with building quickly. This means that the height of buildings and trees can be calculated without making a 3D point cloud of UAV and it has the advantage of being able to utilize non-experts. In the future, further studies for semiautomatic/automation of this technique should be performed. The development and research of these technologies is expected to help to understand the current status of environmental policies and roadside trees in urban areas.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.06a
• /
• pp.3-17
• /
• 2004

Space-borne Earth observation technique is one of the most cost effective and rapidly advancing Earth science research tools today and the potential field and micro-wave radar applications have been leading the discipline. The traditional optical imaging systems including the well known Landsat, NOAA - AVHRR, SPOT, and IKONOS have steadily improved spatial imaging resolution but increasing cloud covers have the major deterrent. The new Earth observation satellites ENVISAT (launched on March 1 2002, specifically for Earth environment observation), ALOS (planned for launching in 2004 - 2005 period and ALOS stands for Advanced Land Observation Satellite), and RADARSAT-II (planned for launching in 2005) all have synthetic aperture radar (SAR) onboard, which all have partial or fully polarimetric imaging capabilities. These new types of polarimetric imaging radars with repeat orbit interferometric capabilities are opening up completely new possibilities in Earth system science research, in addition to the radar altimeter and scatterometer. The main advantage of a SAR system is the all weather imaging capability without Sun light and the newly developed interferometric capabilities, utilizing the phase information in SAR data further extends the observation capabilities of directional surface covers and neotectonic surface displacements. In addition, if one can utilize the newly available multiple frequency polarimetric information, the new generation of space-borne SAR systems is the future research tool for Earth observation and global environmental change monitoring. The potential field strength decreases as a function of the inverse square of the distance between the source and the observation point and geophysicists have traditionally been reluctant to make the potential field observation from any space-borne platforms. However, there have recently been a number of potential field missions such as ASTRID-2, Orsted, CHAMP, GRACE, GOCE. Of course these satellite sensors are most effective for low spatial resolution applications. For similar objects, AMPERE and NPOESS are being planned by the United States and France. The Earth science disciplines which utilize space-borne platforms most are the astronomy and atmospheric science. However in this talk we will focus our discussion on the solid Earth and physical oceanographic applications. The geodynamic applications actively being investigated from various space-borne platforms geological mapping, earthquake and volcano .elated tectonic deformation, generation of p.ecise digital elevation model (DEM), development of multi-temporal differential cross-track SAR interferometry, sea surface wind measurement, tidal flat geomorphology, sea surface wave dynamics, internal waves and high latitude cryogenics including sea ice problems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.1029-1036
• /
• 2014

Several types of automatic 3D scanners are available for use in the 3D scanning industry, e.g., an automatic 3D scanner that uses a robot arm and one that uses an automatic rotary table. Specifically, these scanners are used to obtain a 3D shape using automatic assisting devices. Most of these scanners are required to perform numerous operations, such as merging, aligning, trimming, and filling holes. We are interested in developing an automatic 3D shape collection device using a spherical-coordinate-based guiding system. Then, the aim of the present study is to design an automatic guiding system that can automatically collect 3D shape data. We develop a 3D model of this system and measuring data which are collected by a personal computer. An optimal design of this system and the geometrical accuracy of the measured data are both evaluated using 3D modeling software. The developed system is then applied to an object having a highly complex shape and manifold sections. Our simulation results demonstrate that the developed system collects higher-quality 3D data than the conventional method.