• Proceedings of the KIPE Conference
• /
• 1998.11a
• /
• pp.33-37
• /
• 1998

For the high power variable speed applications, the DCTLI(diode clamped three-level inverter) have been widely used. This paper describes the analysis of the neutral point current of the DCTLI and the improved space vector-based PWM strategy considering the switching frequency of power devices, that minimizes the fluctuation of the neutral point current in spite of high modulation index region and low power factor. It contributes to decrease the capacitance of dc-link capacitor bank and to increase the neutral point voltage controllable region. Especially, even if second (or even) order harmonic is induced in load current (at this situation, is was investigated that the general control method can not suppress the neutral point voltage variation), this PWM can provide effective control method to suppress the neutral point voltage variation. Various simulation results by means of Matlab/Simulation are presented to verify the proposed PWM.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.106-115
• /
• 2015

This paper proposes a novel direct power control (DPC) strategy for neutral-point-clamped (NPC) three-level rectifiers, to directly control the active power, the reactive power and the neutral point potential of the rectifiers by referring to three pre-calculated vector influence tables and minimizing an objective function. In the three vector influence tables, the influences of different voltage vectors on the active power, the reactive power and the neutral-point potential are shown explicitly. A conceptual description and control algorithm of the proposed controller are presented in this paper. Then, numerical simulations and experiments are carried out to validate the proposed method. Both the simulation and experimental results show that good performances during both the steady-state and transient operating conditions are achieved. As a result, the proposed strategy has been proven to be effective for NPC three-level rectifiers.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.922-925
• /
• 2004

Bluetooth technology is essentially a method for wireless connection of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments. The bluetooth system supports both point-to-point connection and point-to-multipoint connections. In point-to-multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There is one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The Bluetooth standard has been suggested that Bluetooth equipments can be used in the short-range, maximum 100 meters . It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.75-80
• /
• 2003

Most of the control point surveying use a triangulation point and a bench mark with Total Station and Level. nowadays, the research is being accomplished for practical use of GPS. but In this study the optimum time and the optimum occupation time are analyzed, so as to examine possibility of the control point surveying that use GPS continuous station data of National Geography Institute. Also, The efficient surveying methods that compare the result of data that processed using broadcast ephemeris with the result of data that processed using precise ephemeris. As a result of that, Error feature analysis of the control point surveying in connection with GPS continuous observation will provide us estimation of errors and efficient topography information acquisition

• Proceedings of the IEEK Conference
• /
• 2000.06c
• /
• pp.13-16
• /
• 2000

In this paper, we propose hybrid control method of neural network using the 3-point search algorithm. Proposed control method is searched the weight using the 3-point search algorithm for off-line then control the on-line. In order to verify the usefulness of the proposed method, we simulated the proposed control method with one link manipulator system and confirmed the excellency.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.1 no.2
• /
• pp.49-60
• /
• 2003

The purpose of this study was to evaluate the effect of Halliwick 10 point program on the balance control. Fourteen undergraduate students participated in the experiment, and classified 7 experiment and 7 control group, randomly. Halliwick 10 point program was applied in the experiment group for 4 weeks. Balance index was measured using KAT 2000. Balance index were measured before, during(2 weeks), and after(4 weeks) the training for 4 weeks. 2-way repeated measures ANOVA was used to further distinguish between the groups. The following results were obtained; 1. The total balance index scores from a KAT were significantly decreased after 4 weeks compared with before the training passing of time. However there was no significant difference between experiment and control group. 2. The left and anterior shifting balance index scores from a KAT were significantly decreased after 4 weeks compared with before the training passing of time. However there was no significant difference between experiment and control group. These results lead us to the conclusion that the balance ability of women twenties increase as the water is higher than that of the ground applied Halliwick 10 point program of the water specific therapy province. Therefore, A further direction of this study will be to provide more evidence for Halliwick 10 point program in the water specific therapy.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.300-314
• /
• 2017

This paper examines finite rotation angle (FRA) applications for spacecraft attitude control. The coordinate transformation matrix and the attitude kinematics represented by FRAs are introduced. The interpolation techniques for the angular orientations are thoroughly investigated using the FRAs and the results are compared to those using traditional methods. The paper proposes trajectory description techniques by using extremely smooth polynomial functions of time, which can describe point-to-point attitude maneuvers in a realizable and accurate manner with the help of unique FRA features. In addition, new controller design techniques using the FRAs are developed by combining the proposed interpolation techniques with a model predictive control framework. The proposed techniques are validated through their attitude control applications for an aggressive point-to-point maneuver. Conclusively, the FRAs provide much more flexibility than quaternions and Euler angles when describing kinematics, generating trajectories, and designing attitude controllers for spacecraft.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.249-254
• /
• 1987

This paper presents a new method for generating smooth free-form surface by local correction. B-spline surface is used for its convenience of local correction, and the direction of surface correction is fixed to the average-surface-normal direction. The surface to be corrected is approximated into a uniform cubic B-spline surface. Then, the smoothness (curvature arrows, iso-parametric lines) of the approximated surface is displayed with B-spline control points. When a control point near the region that needs correction is selected, a new point 1 mm higher than the original control point in the direction of the average surface normal is displayed. And the surface is corrected by giving the amount of control point movement interactively. Since the direction of correction is given by the program and the amount of correction is selected by the user, the method is called semiautomatic. sufficiently smooth surface can be obtained by this method. Examples are given to illustrate the method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.342-348
• /
• 2013

It proposes an efficient control algorithm to increase electric power transmission efficiency between photovoltaic power generating system and the grid. The main controller finds a maximum efficiency condition by considering the quantity of power generated from PV arrays, the number of inverters, and efficiency of PV inverter. According to the condition, a relay board arranges a point of contract of PV arrays. By the disposition of PV arrays, it assigns the optimized power on each PV inverter. Operational principle of the proposed maximum efficiency point tracking algorithm is given in detail. To verify the validity of the proposed approach, computer-aided simulation and experiment carried out.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.3
• /
• pp.205-212
• /
• 2012

This paper proposes the fuzzy logic based variable step-size MPPT (Maximum Power Point Tracking) method for the stability at the steady state and the improvement of the transient response in the wind power system. If the change value of duty ratio is set on stability of the steady state, MPPT control traces to maximum power point slowly. And if the change value is set on improvement of the transient response, the system output oscillates at the maximum power point. By adjusting the step size with fuzzy logic, it can be improved the MPPT response speed and stability at steady state when MPPT control is performed to track the maximum power point. The effectiveness of the proposed method has been verified by simulations and experimental results.