• Journal of the Ergonomics Society of Korea
• /
• v.6 no.2
• /
• pp.19-28
• /
• 1987

If an error occurs in the automatic mode when the advanced teleoperator system performs a task in hostile environment, then the mode changes into the manual mode. The operation by program and the operation by hyman recover the error in the manual mode. The system resumew the automatic mode and continues the given task. In order to utilize the inverse kinematics as means of the operation by program in the manual mode, Lee and Nagamachi determined the end point of the robot trajectory planning which varied with the height of the task object recognized by a T.V monitor, solved the end point by the fuzzy set theory, and controlled the position of the robot hand by the inverse kinematics and the posture of the robot hand by the operation by human. But the operation by human did take a lot of task time because the position and the posture of the robot hand were separately controlled. To reduce the task time by human, this paper developes an error recovery expert system (ERES). The position of the robot hand is controlled by the inverse kinematics of the cartesian coordinate system to the end point which is deter- mined by the fuzzy set theory. The posture of the robot hand is controlled by the modulality of the robot hand's motion which is made by the posture of the task object. The knowledge base and the inference engine of the ERES is developed using the muLISP-86 language. The experimental results show that the average task time by human the ERES which was performed by the integration of the position and the posture control of the robot hand is shorter than that of the research, done by the preliminary experiment, which was performed by the separation of the position and the posture control of the robot hand. A further study is likely to research into an even more intelligent robot system control usint a superimposed display and digitizer which can present two-dimensional coordinate of the work space for the convenience of human interaction.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.97-104
• /
• 2009

Supplementary control point and urban control point have different purpose and characteristic in the view of installation but their measurement method and permanent marker position are very similar. Therefore if we could use them by connecting those two control point, we would improve the arrangement density as well as minimizing cost of restoration from the loss of control point. So we tried to suggest the possibility of connecting these two control point and usage by analysing positional accuracy of urban control point on the base of supplementary control point in this study. The result of this study is as following. When analysing the positional accuracy of 13 urban control points of the study areas, there were RMSE of connection errors between ${\pm}8cm$ and ${\pm}11cm$ for each measurement point. The result confirmed the possibility of connecting supplementary control point to urban control point and its usage within the allowable error tolerance that the present cadastral law permits.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.890-895
• /
• 1990

A theoretical and experimental study of a single link flexible arm a tip mass is presented for the translational end-point positioning. The problem of shifting the end-point from its initial position to the commanded position by the amount of W $_{d}$ is considered for the open loop control such that the base follows up the given path function. The theoretical results are obtained by applying the method of the Laplace transform to the governing equation, and the solution is calculated by the method of numerical inversion. Experimental results are obtained and compared with the theoretical ones.s.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.83-85
• /
• 1997

In this paper, a self-tunning fuzzy inference technique for stabilization of the inverted pendulum system is proposed. The facility of this self-tunning fuzzy controller which has swing-up control mode and a stabilization one, moves a pendulum in an initial natural stable equilibrium point and a cart in arbitrary position, to an unstable equilibrium point and a center of rail. Specially, the virtual equilibrium point(${\phi}_{VEq}$) which describes functionally considers the interactive dynamics between a position of cart and a angle of inverted pendulum is introduced. And comparing with the convention optimal controller, the proposed self-tunning fuzzy inference structure made substantially the inverted pendulum system robust and stable.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.304-309
• /
• 1998

In this paper, a fuzzy controller for stabilization of the inverted pendulum system is propose. The facility of this fuzzy controller which has a swing-up control mode and a stabilization one, moves a pendulum in an initial natural stable equilibrium point and a cart in arbitary position, to an unstable equilibrium point and a center of rail. Specially, the virtual equilibrium point ($\Phi$veq) which describes functionally considers the interactive dynamics between a position of cart and a angle of inverted pendulum is introduced. And comparing with the convention optimal controller, the proposed hierarchical fuzzy inference structur made substantially the inverted pendulum system robust and stable.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.2
• /
• pp.218-228
• /
• 2003

A hydraulic system is modeled as the second order differential equation with uncertain system parameters and disturbance composed of modeling errors. To Position the load of the hydraulic system to a desired point. the servo valve of the hydraulic system is controlled. As a control scheme. a global sliding mode control(GSMC) is Proposed Since the servo valve has a torque limit. the GSMC is designed to coordinate the position of the load along the minimum time trajectory within the torque limit. The Proposed control scheme can be designed with ranges of parametric uncertainties and specified torque limits. By the proposed control scheme, the closed form solution of the arriving time at the desired position can be estimated.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.1-6
• /
• 1992

A principle of "orthogonalization" is proposed as an extended notion of hybrid (force and position) control for robot manipulators under geometric endpoint constraints. The principle realizes the hybrid control in a strict sense by letting position and velocity feedback signals be orthogonal in joint space to the contact force vector whose components are exerted at corresponding joints. This orthogonalization is executed via a projection matrix computed in real-time from a gradient of the equation of the surface in joint coordinates and hence both projected position and velocity feedback signals become perpendicular to the force vector that is normal to the surface at the contact point in joint space. To show the important role of the principle in control of robot manipulators, three basic problems are analyzed, the first is a hybrid trajectory tracking problem by means of a "modified hybrid computed torque method", the second is a model-based adaptive control problem for robot manipulators under geometric endpoint constraints, and the third is an iterative learning control problem. It is shown that the passivity of residual error dynamics of robots follows from the orthogonalization principle and it plays a crucial role in convergence properties of both positional and force error signals.force error signals.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4
• /
• pp.323-332
• /
• 2004

Sound localization can be controlled by simulating the transfer functions from sound source to listener's ears. Even by using this method. a good performance cannot be expected when a listener slightly moves from the position where the transfer functions were measured. We have already been proposed the multi-point control method to overcome the problem of the listener's small movement. In this method, the transfer functions are simulated at multiple points around the listner's ears so that the points forms an area which covers the small movement of the listener. In this paper. we investigated the effect of applying multi-point control method for the control of sound localization. Results show that multi-point control is effective to keep the perceptual error of the localized direction small when the listener moves up to 6 cm from the original position.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.13-20
• /
• 2010

Currently, NGII(National Geographic Information Institute) provides VRS(Virtual Reference System) service using 44 CORS(Continuously Operating Reference Stations). Since the VRS provides high-precision coordinate in a short time, the users and applications are expected to be rapidly increasing. The accuracy analysis on the VRS service, however, was not sufficiently performed yet. Therefore, in this study, the VRS data is acquired from various circumstances and its accuracy is analyzed. According to analysis, it was concluded that the VRS could be applied to public control point survey. Furthermore, it was found that the PQ(Position Quality) which represents variance of estimated coordinates rather than GDOP(Geometric Dilution of Precision) is more relevant as a factor to determine the accuracy of coordinates. Based on the analysis of data from four manufacturers (TRIMBLE, MAGELLAN, LECIA, TOPCON), it was confirmed that the standard deviations better than 3cm. Therefore, VRS Survey apply to public control point survey.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.82-82
• /
• 2000

The way which estimates a position from Navigation is Dead-reckoning Navigation and Radio Navigation. Generally dead-reckoning navigation uses Gyro and odometer as sensor, but these have problems which are an integrating noise and a noise-sensitivity. Gps which is used by radio-navigation has a Troposthetic error and MultiPath ewer and so on. For minimizing a Troposthetic error and a Multipath error, this paper suggests to an algorithm which use vanishing point on CCD camera.