• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1210-1212
• /
• 1987

Adaptive control for robot manipulator controller has been considered as an effective approach because robot dynamic models contain the nonlinearities and uncertainties. This paper present an approach for the position and velocity control of a manipulator by using the seif-tuning type controller for each point. The complicated model manipulator system is modeled by a set of time series difference equation. The parameters of the models are determined by online recursive algorithms. Finally some remarks on the effectiveness and applications of adaptive controller are discussed.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.709-711
• /
• 1999

In this paper, Fuzzy Logic Controller was Designed for the Degree control of Arago's disk system. Arago's disk system is an application of Arago's disk phenomenon which is the operating principle of induction motor. Since the Arago's disk system varies to stable region. maginally stable region, unstable region according to the degree of bar respectively, it is a sutable system which can be evaluate an efficiency of the system. While an existing controller which was designed using linearized system modeling could control the system on only one operating point, fuzzy logic controller has the advantage in showing good response for multi-operating points because it does not need system modeling.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.101.5-101
• /
• 2002

A vehicle simulator is made here to simulate the lateral control of vehicles. Dead-reckoning sensors which consist of gyroscopes and accelerometers are utilized for the positioning of it. A significant side-slip occurs when the developed vehicle is drove autonomously. To cope with the side-slip, the vehicle is steered to follow the reference yaw rate which is generated by the relationship between the target point and the position of vehicle. The experimental results show the good performances of lane tracking and the passenger comfort.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.1
• /
• pp.26-34
• /
• 1998

In this paper, a force control algorithm for edge following task is suggested. Through the contact state modeling between rigid part and end-effector of robot, contact force and contact angle that are essencial parameters to build the control strategies for following movement of end-effector are derived. From these two parameters, we discriminate the every contact state into 8 cases and calculate the new moving position and direction simply. For the experiment. RX90 robot from Staubli with robot language V$^{+}$ is applied and F/T sensor is attached to the wrist of robot with RCC. Finally, 3 edge following experiments including the following of corner point are executed with successful results.s.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.51-54
• /
• 2000

We are concerned with processing methods of the measurement values of sensors in the control system. When some faults happen to sensor components, the measurement value of sensors cause the malfunction of the plant. So it is necessary to detect and reduce the influence of faults to control with reliability for the overall system. The sensor status must be always good for best demonstration of the controller performance. A self-validating sensor detects the sensor state from the measurement value, reconstruct a soft sensor and can improve reliability of the sensor. If sensor faults, the sensor is detected and reconstructed with the best estimate from its correlation to other sensors and historical data. It is applied to the control of a flexible link system with the sensor fault problems in the light sensor module for position to show the applicability. In this paper, we propose a digital controller which reduces deflection of the moving set-point by reconstructing output of a sensor when the sensor fault is detected.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1341-1344
• /
• 2009

A novel method to control the viewing direction by moving aperture location in 4-f illumination optics to control light direction is proposed. Based on integral imaging principle, the relayed point light sources by 4-f optics are modulated by a spatial light modulator, displaying three-dimensional images. In the proposed method, we locate the aperture, which acts as a band pass filter, around an optic axis to control the light direction. Resultantly, assuming that we know the viewer position by a tracking system, we can display appropriate three-dimensional images over large viewing angle.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.4
• /
• pp.424-429
• /
• 2014

In this paper, an image-based luminance measurement system(LMS) is proposed to measure the luminance of outdoor signboards. We design the LMS that can improve disadvantages of efficiency of the point-luminance meter and portability of face-luminance meter using the image of DSLR camera and print out the luminance value by using the proposed luminance analysis algorithm in real time. Outdoor signboards have various size and shape, and are also installed on the various place. Luminance of the signboard is influenced by measurement location, angle, color, etc. Therefore, we measure the change of luminance value in accordance with measurement location for accurate luminance measurement and then consider the luminance value according to the measurement distance. We obtain a numerical relation between luminance value and measurement location. The proposed LMS is verified through comparative experiment with point-luminance meter.

• Spatial Information Research
• /
• v.13 no.4 s.35
• /
• pp.373-380
• /
• 2005

Mobile Mapping Systems are effective systems to acquire the position and image data using vehicle equipped with the GPS (Global Positioning System), IMU (Inertial Measurement Unit), and CCD camera. They are used in various fields of road facility management, map update, and etc. In the general photogrammetry such as aerial photogrammetry, GCP (Ground Control Point)s are needed to compute the image exterior orientation elements (the position and attitude of camera). These points are measured by field survey at the time of data acquisition. But it costs much time and money. Moreover, it is not possible to make sufficient GCP as much as we want. However Mobile Mapping Systems are more efficient both in time and money because they can obtain the position and attitude of camera at the time of photographing. That is, Image Orientation Technique must use GCP to compute the image exterior orientation elements, but on the other hand Direct Georeferencing can directly compute the image exterior orientation elements by GPS/INS. In this paper, we analyze about the positional accuracy comparison of ground point using the Image Orientation Technique and Direct Georeferencing Technique.

• International Journal of Advanced Culture Technology
• /
• v.5 no.3
• /
• pp.67-72
• /
• 2017

Transform variation technique is constituted the vibration status of the flash-gap recognition level (FGRL) on the distribution recognition function. The recognition level condition by the distribution recognition function system is associated with the scattering vibration system. As to search a position of the dot model, we are consisted of the distribution value with character point by the output signal. The concept of recognition level is composed the reference of flash-gap level for variation signal by the distribution vibration function. For displaying a variation of the FGRL of the maximum-average in terms of the vibration function, and distribution position vibration that was the a distribution value of the far variation of the $Dis-rf-FA-{\alpha}_{MAX-AVG}$ with $5.74{\pm}1.12$ units, that was the a distribution value of the convenient variation of the $Dis-rf-CO-{\alpha}_{MAX-AVG}$ with $1.64{\pm}0.16$ units, that was the a distribution value of the flank variation of the $Dis-rf-FL-{\alpha}_{MAX-AVG}$ with $0.74{\pm}0.24$ units, that was the a distribution value of the vicinage variation of the $Dis-rf-VI-{\alpha}_{MAX-AVG}$ with $0.12{\pm}0.01$ units. The scattering vibration will be to evaluate at the ability of the vibration function with character point by the distribution recognition level on the FGRL that is showed the flash-gap function by the recognition level system. Scattering recognition system will be possible to control of a function by the special signal and to use a distribution data of scattering vibration level.

• Nuclear Engineering and Technology
• /
• v.35 no.5
• /
• pp.399-411
• /
• 2003

A model predictive control method is applied to design an automatic controller for thermal power control in a reactor core. The basic concept of the model predictive control is to solve an optimization problem for a finite future at current time and to implement as the current control input only the first optimal control input among the solutions of the finite time steps. At the next time step, the second optimal control input is not implemented and the procedure to solve the optimization problem is then repeated. The objectives of the proposed model predictive controller are to minimize the difference between the output and the desired output and the variation of the control rod position. The nonlinear PWR plant model (a nonlinear point kinetics equation with six delayed neutron groups and the lumped thermal-hydraulic balance equations) is used to verify the proposed controller of reactor power. And a controller design model used for designing the model predictive controller is obtained by applying a parameter estimation algorithm at an initial stage. From results of numerical simulation to check the controllability of the proposed controller at the $5\%/min$ ramp increase or decrease of a desired load and its $10\%$ step increase or decrease which are design requirements, the performances of this controller are proved to be excellent.