• 전기학회논문지
• /
• 제58권10호
• /
• pp.2005-2010
• /
• 2009

Water droplet ejection characteristics of a point-to-plate airgap, with a wet porous point as a corona electrode, has been investigated. And the water droplet traces, charge, mass and number were measured experimentally. More particles are observed with wet porous point than metal point because the corona-discharging wet porous point can eject a number of water droplets. The water droplets ejected from the positive-corona-discharging wet porous point showed very fine traces as compared with those from the negative-corona-discharging wet porous point. Moreover, the water droplets ejected from the AC-corona-discharging wet porous point showed granular-like larger traces. It was shown that the weak corona discharge can eject smaller water droplets with larger ratio of mass-to-charge than the intense corona discharge.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.161-167
• /
• 2009

The liquid solar air conditioning system is introduced as an alternative solution to control air condition and to save electrical energy consumption. The heat and mass transfer performances of dehumidifier/regenerator in liquid solar air conditioning system are influenced by air and desiccant condition. The application of this system, the thermal energy from the sun and inlet air are unable to control, but operation parameter of other components such as pump, fan and sensible cooling unit are able to control. The equilibrium point of heat and mass transfer are the liquid desiccant and inlet air conditions, where, the heat and mass are not transferred between the liquid desiccant and vapor air. By knowing equilibrium point of heat and mass transfer, the suitable optimal desiccant conditions for certain air condition are funded. This present experiment study is investigated the equilibrium point heat and mass transfer in various air and desiccant temperature. The benefit of equilibrium point heat and mass transfer will be helpful in choose and design proper component to optimize electrical energy consumption.

• 산업기술연구
• /
• 제43권1호
• /
• pp.57-62
• /
• 2023

In this review, we introduce the non-parametric Bayesian filtering algorithm known as the point-mass filter (PMF) and discuss recent studies related to it. PMF realizes Bayesian filtering by placing a deterministic grid on the state space and calculating the probability density at each grid point. PMF is known for its robustness and high accuracy compared to other nonparametric Bayesian filtering algorithms due to its uniform sampling. However, a drawback of PMF is its inherently high computational complexity in the prediction phase. In this review, we aim to understand the principles of the PMF algorithm and the reasons for the high computational complexity, and summarize recent research efforts to overcome this challenge. We hope that this review contributes to encouraging the consideration of PMF applications for various systems.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.118-122
• /
• 1999

Thermal mass flow meter was developed using principle of convective heat transfer. The advantage of thermal mass flow meter is measuring mass flow directly, therefore, it is not required to use densitometer or temperature/pressure and DP gages. The final accuracy of this thermal mass flow meter is $\pm1.0{\%}$ or better, reproducibility is $\pm0.2{\%}$, and the response time is 600 ms. The thermal mass flow meter was developed from a single point to multi-points (maximum is 9 points), and the number of points is determined according to desired accuracy and size of piping/duct. Since this thermal mass flow meter adopted microprocessor based design, it is intrinsically accurate, self-error detectable, and has self-diagnosis function. The applications of this thermal mass flow meter are for measurement and control of HVAC air flow, other gas flow, and liquid flow.

• 한국환경과학회지
• /
• 제7권1호
• /
• pp.36-40
• /
• 1998

This study was carried out to investigate the collection Efficiency of mass in collector step at the different of physical gas characterization. This work has focused on the dependence of the collection efficiency of mass in the collector zone of a two-stage set up field with gas temperature T and the dew point tmeperature. To identify the dependence of the mass collection efficiency on the Bounded plate of the collector zone MP.k by the spectre electric resistance of dust $p_e$. and the relative humidify ${\varphi}$, 20 at- tempts have been made with three different gas temperature ($50{\circ}C, 80{\circ}C, 110{\circ}C$) at different dew point. At the specific electric resistance of dust $p_e$=$10^6{\Omega}m$ which relative humidity corresponds to $\phi$ > 15%, a easy rise of the sounded plate secluded dust mass share was measured atwain. As the result of the higher cohesion imprisonment power due to the adsorbtion of particle, the rinse of the relative humidity developed on the particle surface. Therefore, the collection efficiency of mass was not predominant the high temperature T in the collector zone, neither was the pecific ellectric resistance of dust dependent.

• 터널과지하공간
• /
• 제31권1호
• /
• pp.10-24
• /
• 2021

지하 구조물 구축 시 구조물의 안정성을 확보하기 위해서는 주변 암반에 대한 암반 분류가 필수적으로 수행해야 한다. 특히 암반 내에 존재하는 불연속면은 암반의 물리적, 역학적 특성에 지배적인 영향을 미치므로 암반 불연속면에 대한 정확한 정보의 획득을 통해 신뢰도 높은 암반분류값을 제시하는 것은 매우 중요한 요소이다. 이러한 암반 분류는 지금까지 대부분 수작업을 통해 수행되었다. 그러나 대규모 지질조사와 같은 대형 조사면적에 대한 정확도의 부재, 비숙련자에 의한 암반 등급 결정값의 신뢰도 결여 등에 대한 문제점들이 항시 제기되어 왔다. 따라서 최근에 와서는 넓은 범위에 대해서도 신속하고 정확한 암반 분류를 위해 LiDAR를 이용한 암반 분류의 자동화에 대한 연구가 국내·외적으로 널리 이루어지고 있는 추세이다. 그러나 LiDAR 촬영으로 획득되는 point cloud로부터 불연속면의 정보를 분석하는 알고리즘의 특성에 따라 상이한 결과가 도출될 수 있으며, 숙련자에 의한 수작업의 결과를 완벽하게 대체하기에는 미흡한 경우가 종종 발생하고 있다. 따라서 본 연구에서는 LiDAR 촬영으로 획득한 point cloud로부터 불연속면을 추출하는 다양한 알고리즘을 설명하였으며, 이들 알고리즘을 이용하여 실제 암반 사면을 대상으로 불연속면을 추출하는 과정을 분석하였다. 본 연구에서 제시하는 다양한 알고리즘의 적용 과정은 향후 LiDAR 등을 통하여 획득한 디지털 데이터로부터 암반 불연속면을 추출하는 연구에서 참고자료로 활용될 것을 기대한다.

• 디지털융복합연구
• /
• 제10권6호
• /
• pp.111-131
• /
• 2012

대량맞춤(mass customization)은 대량 생산과 맞춤화의 이점이 결합된 것을 의미한다. 현재 비즈니스 패러다임의 혁신적인 변화의 하나로 대량 맞춤을 꼽을 수 있지만 어떠한 상황에서 대량맞춤이 성공적인지에 대한 연구는 부족한 실정이다. 본 연구는 브랜드 인지도가 높고 생산 규모를 갖춘 세 업종(화장품, 스포츠 운동화, 가전제품)의 대표적 제조기업의 대량 맞춤 사례를 통해서 탐색하고자 한다. 본 연구는 대량 맞춤이 갖는 본질적인 특성을 기반으로 한 성공모델을 제시하고자 하기 위해 Lampel 과 Mintzberg [35]이 제안한 맞춤화의 단계인 순수 표준에서 순수 맞춤에 이르는 전략적 범위에서 맞춤화의 성공적인 전략을 살펴보았다. 본 연구결과 고객의 수요와 공급의 연결고리가 단절되는 디커플링 포인트(decoupling point)가 대량맞춤의 중요한 성공요소가 되는 것으로 나타났다. 본 연구 결과는 향후 대량 생산 체제를 갖추고 고객의 요구에 맞는 제품 생산을 추구하는 기업에게 대량맞춤에 대한 전략적 방향을 제시할 수 있을 것으로 기대된다.

• 산업기술연구
• /
• 제15권
• /
• pp.169-174
• /
• 1995

A method of calculating the natural frequency corresponding to the first mode of vibration of beams and tower structures, with irregular cross-sections and with arbitrary boundary conditions was developed and reported by D. H. Kim in 1974. IN this paper, the result of application of this method to the laminated plates with axial forces and with attached point mass/masses is presented. Both $N_x$ and $N_y$ forces are considered. The solution for the laminated plates with arbitrary boundary conditions and irregular section can be obtained by simply obtaining the deflection influence coefficients by any method. The effect of neglecting the mass of the plates on the natural frequency, as the ratio of the point mass/masses to the plate mass increases, is thoroughly studied. The influence of $N_x$ and $N_y$ is also carefully investigated.

• 천문학회지
• /
• 제37권1호
• /
• pp.15-39
• /
• 2004

We analyse the results of mass models derived from the HI rotation! curves of spiral galaxies and find that the slope of the luminous mass-circular velocity relation is close to 4. The luminous mass-circular velocity relation with a slope of about 4 can be explained by an anti-correlation between the mass surface density of luminous matter and the mass ratio of the dark and luminous components. We also argue that the conspiracy between luminous and dark matter exists in a local sense (producing a flat or smooth rotation curve) and in a global sense (affecting the mass ratio of the dark and luminous matter), maintaining the luminous mass-circular velocity relation with a slope of about 4. We therefore propose that the physical basis of the Tully-Fisher relation lies in the luminous mass-circular velocity relation. While the slope of the luminous mass-circular velocity relation is fairly well defined regardless of the dark matter contribution, the zero-point of the relation is still to be determined. The determination of the slope of the Tully-Fisher relation needs one more step: the mean trend of the luminosity-luminous mass relation determines the overall shape (slope) of the Tully-Fisher relation. The key parameter needed to determine the zero-point of the luminous mass-circular velocity relation and the slope of the Tully-Fisher relation obviously is the luminous mass-to-light ratio.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.306-312
• /
• 1998

This paper describes syntheses of thickener for di-urea grease using constant velocity joint. The thickeners of di-urea grease were synthesized by reaction of diisocyanate with various alkylamines, hexylamine, octylamine, stearylamine and cyclohexylamine at high temperatxire. The synthesized thickener were analyzed by FT-IR spectroscopy and two kinds of Mass spectroscopy (EI & FAB). Dropping point and Consistency of synthesized di-urea grease were determined.