• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2100-2105
• /
• 2008

A numerical analysis was conducted to predict the heat transfer characteristics of a high-temperature, high heat flux solar receiver as the end-wall angle varied. The concentration ratio of the solar receiver ranges from 200 to 1000 and the concentrated heat is required to be transported to a certain distance for specific applications. This study deals with a solar receiver incorporating high-temperature sodium heat pipe as well as a typical one that employs a molten-salt circulation loop with the same outer dimensions. The isothermal characteristics in the receiver section is of major concern. The diameter of the solar thermal receiver was 120 mm and the length was 400 mm. FLUENT, a commercial software, was employed to deal with the radiative heat transfer inside the receiver cavity and the convection heat transfer along the channels and heat pipes. The numerical results were compared and analyzed from the view point of heat transfer characteristics the solar receiver system.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.38.1-38.10
• /
• 2016

Background: The aims of this study are to evaluate the lip morphology and change of lip commissure after mandibular setback surgery (MSS) for class III patients and analyze association between the amount of mandibular setback and change of lip morphology. Methods: The samples consisted of 14 class III patients treated with MSS using bilateral sagittal split ramus osteotomy. Lateral cephalogram and cone-beam CT were taken before and about 6 months after MSS. Changes in landmarks and variables were measured with 3D software program $Ondemand^{TM}$. Paired and independent t tests were performed for statistical analysis. Results: Landmarks in the mouth corner (cheilion, Ch) moved backward and downward (p < .005, p < .01). However, cheilion width was not statistically significantly changed. Landmark in labrale superius (Ls) was not altered significantly. Upper lip prominence angle (ChRt-Ls-$ChLt^{\circ}$) became acute. Landmarks in stomion (Stm), labrale inferius (Li) moved backward (p < .005, p < .001). Lower lip prominence angle (ChRt-Li-$ChLt^{\circ}$) became obtuse (p < .001). Height of the upper and lower lips was not altered significantly. Length of the upper lip vermilion was increased (p =< 0.01), and length of the lower lip vermilion was decreased (p < .05). Lip area on frontal view was not statistically significantly changed, but the upper lip area on lateral view was increased and change of the lower lip area decreased (p > .05, p < .005). On lateral view, upper lip prominent point (UP) moved downward and stomion moved backward and upward and the angle of Ls-UP-Stm ($^{\circ}$) was decreased. Lower lip prominent point (LP) moved backward and downward, and the angle of Stm-LP-Li ($^{\circ}$) was increased. Li moved backward. Finally, landmarks in the lower incisor tip (L1) moved backward and upward, but stomion moved downward. After surgery, lower incisor tip (L1) was positioned more superiorly than stomion (p < .05). There were significant associations between horizontal soft tissue and corresponding hard tissue. The posterior movement of L1 was related to statistically significantly about backward and downward movement of cheilion. Conclusions: The lip morphology of patients with dento-skeletal class III malocclusion shows a significant improvement after orthognathic surgery. Three-dimensional lip morphology changes in class III patients after MSS exhibited that cheilion moved backward and downward, upper lip projection angle became acute, lower lip projection angle became obtuse, change of upper lip area on lateral view was increased, change of lower lip area decreased, and morphology of lower lip was protruding. L1 was concerned with the lip tissue change in statistically significant way.

• KIEAE Journal
• /
• v.7 no.1
• /
• pp.23-31
• /
• 2007

This study aims to evaluate the illuminance performance of sloped light guide with automated venetian blind systems. For the purpose, a mock-up model was constructed as a prototype of Korean office building with $12.0m{\times}7.3m{\times}3.7m$ ($w{\times}d{\times}h$) and south facing side-window mounted between the clerestory window($2.0m^2$) and the view window($5.6m^2$). The light guide of 1.28m deepth and $29^{\circ}$ tilted angle, is covered with 0.6mm galvanized steel sheet and 97% reflective film. To protect the room from low solar angle, a blind systems, 0.15m deepth and $30^{\circ}$ automated slat angle was installed. To assess illuminance performance, the totally 37 measuring points for illuminance were monitored. For the detailed analysis, photometric sensors were installed at work-plane (8 points), wall (7 points), ceiling (3points), and exterior horizontal illuminance (1 point) respectively. The performance was measured under clear sky and is monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons of light factor and uniformity are discussed.

• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.443-449
• /
• 2021

In this study, the purpose is to present the foot inclination angle for realizing an image similar to that of the existing examination method and to present the clinical usefulness of the new examination method through comparison between the existing examination method and the newly designed standing foot oblique projection. A foot phantom was used, and the magnification of the image according to the angle was quantitatively evaluated by attaching a nut to the position of the cuboid of the phantom. The internal oblique image acquired using a 30° wedge was set as the standard image. And that image was compared with the images acquired by changing the angle of the foot from 20° to 65° at intervals of 5°. Image evaluation was performed by 3 radiological technologists, and qualitative evaluation using a Likert 5-point scale for evaluation items of true oblique view and quantitative evaluation of the value obtained by measuring the diameter of a nut in each image were performed as image evaluation. For data analysis, reliability analysis between the measure and comparative analysis of the average value for each angle were performed. The qualitative evaluation score for each image was 4.5 to 5 points for most questions in the case of the standard image. And 4 points or less for most questions in the images with a foot angle of 45° or less, and an evaluation score close to the standard image was obtained in the image of 50° or more. And in the quantitative evaluation, the diameter of the nut was measured to be 9.28~9.56 mm. The qualitative evaluation showed a reliability of 0.95~1.0 and the quantitative evaluation was 0.62. As a result of comparing and analyzing the average of the quantitative and qualitative average values for each angle image, the group with the average value most similar to the standard image was images obtained at 55° and 60°, and in the post-analysis, the images of both groups were the same group as the standard image(p<0.01). As a result of this study, it was found that the angle of inclination of the foot for realizing the image most similar to the existing image in the standing foot oblique projection is 55°~60°. In addition, if this test method is applied to the clinic, it is believed that it will help prevent safety accidents such as falls during the test and improve test efficiency by minimizing the movement of patients for the test.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.19-32
• /
• 2012

The purpose of this study is to quantitatively measure the view target and the view area through the selection of landscape control point by selecting Jimyeong-dong Dong-gu and Yeongyeong-dong Buk-gu Daegu, which are planned as the large scale housing complex development area, as the target places. It is very meaningful that from the simulation based on this measurement, the improvement methods are attempted to be suggested at the project level. The results of this study are as follows. First, the total number of viewing targets derived from the literature analysis for the selection of the viewing targets was 24, and finally derived main viewing targets were 4 places. Second, the total number of selection criteria of the derived landscape control point was 15, and these were re-categorized as prospect, accessibility and publicness according to the common property. The preliminary LCPs were selected by measuring the publicness and accessibility, and because of the said measurement, a total of 43 preliminary LCPs were selected. The final LCPs were selected by estimating the prospect of the selected preliminary LCPs, and as a result of estimation, a total of 29 final LCPs were selected. Finally, the total number of evaluation indicators derived from literature analysis was 26. Because of the valuation by the landscape control point, it was found that the 2 view areas were the I grade, 3 areas were II grade and 3 areas were the V grade, the lowest grade among 29 view areas. From the analysis on problems for the improvement methods, 4 improvement-indicators including the diversity of land mosaic were selected for the view area-1 without considering the development project drawing. In addition, for the view area-2 with considering the development project drawing, the landscape as the scenery forests was well formed, and the arrangement of architectures for the security of view corridor was right angle arrangement, and their floor number was 10.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.05a
• /
• pp.21-32
• /
• 2002

In accordance with the development plans of Ulsan harbor, Ulsan new harbor will be contructed considering supporting Ulsan harbor as a safe berthing and departure at single buoy mooring(SBM). In this study, we used a full-mission ship handling simulator adopting 300,000 DWT VLCC manoeuvered at the planned Ulsan SBM. Five masters who have had a long experience of ship maneuvering were called to carry out the simulations, of which each scenario were tried one, completed total of 68 times. The marine traffic safety was assessed in terms of 1) the closest point of approach(CPA) to other SBM and breakwater in the vicinity and the probability of crossing the restricted area of the closest SBM and fairway limit, 2) subjective evaluation such as the mental burden and the maneuvering difficulty of shiphanders, and 3) the opinions of shiphandlers. From the result of this simulation, we have a conclusion as follows; First, because crude oil berthing angle is so small by current S-OiL Co. crude oil buoy by SK Co. No 3 crude oil buoy different view SK Co. No 3 crude oil buoy and interference of current KNOC crude oil buoy, Berthing is impossible, and Emergency departing is very dangerous too operation impossible. Second it is desirable that SK Co. No 2 and No 3 Single buoy Mooring that do different view controls position so that to be not put in straight line each other. Third, SK Co. No 1 and 2 single buoy mooring that do different view to Onsanhang berthing and departing is seized by single buoy mooring by external force ship that set sail does faith control need.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.151-158
• /
• 2006

The purpose of this study was to find out the kinematical characteristics of arm's basic position in ballet. In order to achieve the purpose of the study, 3D cinematographic analysis was conducted with a ballerina who might performed the perfect arm's basic position. According to the results of this study, it was appeared that the shoulder kept about 78%-82%, the elbow kept about 62%-96%, the wrist kept 52%-109%, and finger kept 48%-110% with the height. Also, movement was formed with $21^{\circ}-77^{\circ}$ of the upper arm angle, $106^{\circ}-164^{\circ}$ of the elbow, $125^{\circ}-140^{\circ}$ of the wrist, and $83^{\circ}-160^{\circ}$ of the shoulder. The left-right ratio of the total arm angle was 98% in the first, second, and third position, and 100% in the forth position. The angle of arm gradient was remained $-68^{\circ}$ in the first position, $-27^{\circ}$ in the second position, $73^{\circ}$ in the third position, and $-11^{\circ}$ in the forth position. Based on the results mentioned above, balance and symmetry of both arms was an important factor in those four positions. Although it is impossible to maintain the position like robot, it may be a good performance if a certain level of extent was remained With respect to this point of view, it may be a good position if the difference between right and left arm in each joint can be remained within 2%. Angle also was an important factor that if the difference in total angle can be remained within 2% it may be an excellent position, there was difference of right and left based on the joint though. Therefore, practice and instruction to make a perfect symmetry as much as possible were needed Also, it would be a good movement if position and angle of joint within 2% difference of right and left arm can be remained In turn, because ballet is movement with expression of the body, beauty of the body and balance of the movement have to be harmonized for beautiful performance. Therefore, it would be a meaningful future study considering the body condition and movement of ballerina to define the beauty.

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.173-183
• /
• 2017

In this research, analysis based on VR journalism outlet the New York Times' was carried out. The image analysis of was done through the frames of angle, shot (size, length, movement), and limited user-directed interaction (point, sound). The result of this is as follows. Firstly, the direction was done using a basis of normal and low angles. Secondly, it was able to be confirmed that the shooting was done in order by medium, full, and long shot. Thirdly, with regard to the length of the shot, most direction was done through long takes. Fourthly, most images came to consist of fixed shots. Lastly, this is limited user-directed interaction. This may be separated into 2 aspects: sound, and movement of the independent free agent. Through these, interaction was guided through free point of view concerning realistic situations to point of view guidance and users. This research may be referred to as foundational research for the further advancement of in-depth discussion pertaining to VR journalism.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1355-1364
• /
• 2001

Characteristics of secondary vortices is topologically investigated in the near-wake region of a circular cylinder, where the Taylor's hypothesis does nut hold. The three-dimensional flow fields in the wake-transition regime were measured by a time-resolved PIV for various planes of view. The convection velocities of the Karman and secondary vortices are evaluated from the trajectory of the vortex center. Then, saddle points are determined by applying the critical point theory. It is shown that the inclination angle of the secondary vortices agrees well with the previous experimental data. The flow fields in a moving frame of reference have several critical points and the mushroom-like structure appears in the streamline patterns of the secondary vortices. Since the distributions of fluctuating Reynolds stresses defined by triple decomposition are closely related with the existence of secondary vortices, the physical meaning of them is explained in conjunction with the vortex center and saddle point trajectories.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.2
• /
• pp.58-69
• /
• 2003

The Hemi-sphere projection method produces an image that includes all surrounding visual landscape from a view point. This characteristic can solve the problem of perspective method that has only a limited view angle, and thus can be a potentially effective method for the analysis of visual landscape. This study tried to adopt the hemi-sphere projection method in the evaluation of streetscape, and examined its effectiveness and possibilities. Computer animations using the perspective method and the hemi-sphere method were produced for Bang-Hak Ro, Seoul, and the kames of the animations were reclassed to identify the visibility ratio of physical elements(buildings, sky and mountains). A preference questionnaire was given to 51 university students, and the relationships between the visibility ratio and visual preference were analyzed. The results showed that visual preference of streetscape can be explained by three factors: Openness, Uniformity, and Variousness, accounting for 63.2% of the total variance, and among which Openness showed the highest proportion at 32.1％. The visibility ratio calculated by the hemi-sphere method yielded strong correlation coefficients with Openness, and it was much higher than with the perspective method. The hemi-sphere method also produced significant correlation coefficients about Uniformity and Variousness, but the perspective method could not. The results demonstrated that the hemi-sphere method can provide more accurate observation of visual changes, and that it can be an effective method for the analysis of streetscape.