• 한국융합학회논문지
• /
• 제8권10호
• /
• pp.167-172
• /
• 2017

본 연구는 그동안 탁월한 치유의 기능이 내재되어 있다고 알려진 시조의 감정 코드들을 분석하여 인문학적 치유의 콘텐츠를 활성화시키고자 하는 데에 목적이 있다. 치유작용의 일환으로써의 시조는 여러 작품들을 감상하는 과정에서 형성되는 감정의 융합을 통해 감정의 총체라 할 수 있는 치유의 감정 코드들을 형성한다. 이러한 과정은 인체생리학적으로 인체 내에서의 문학치료의 진행을 가능하게 한다. 머신러닝이 인지기능에 의해 스스로 학습하는 것처럼 상시적으로 부호화와 재부호화에 대한 코딩 과정이 인체 시스템의 수많은 뉴런들의 집합체들에서 작동된다. 그 과정에서 감정 코드들의 집합적인 부호화에 의해 인체 내에서 아미노산이 합성되는 것으로 예측된다. 이러한 아미노산들이 인체의 신호 체계를 조절하는 것이다. 향후 이러한 인문학과 인체생리학의 접점에서의 치료의 연구가 진행된다면 보다 질 높은 인문학적 치유의 프로그램이 활성화될 것으로 기대된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.269-272
• /
• 2008

본 연구에서는 취성적인 시멘트 복합체에 2%이내의 단섬유를 보강하여 균열하중이 이후에도 급격한 강도저하 없이 강재와 같은 변형경화 특성을 부여한 신개념의 건설재료인 변형 경화형 시멘트 복합체(SHCC)를 활용한 콘크리트 구조물의 균열제어성능 개선을 위한 방안을 모색하고자 한다. 본 연구에 활용된 SHCC는 물겹합재비 0.45의 시멘트 복합체에 1.3%의 PVA 섬유 및 0.2%의 PE 섬유를 보강하여 제조되었다. 단면 $100{\times}100mm$의 정사각형 단면을 갖는 무근 콘크리트 보와 인장측 하부면에서 30 및 50mm 두께의 콘크리트를 SHCC로 단면 대체한 보의 휨 및 균열진전 과정을 비교하여 본 연구에서 제조된 SHCC에 의한 균열제어성능을 평가하고자 하였다. 인장측 하부면을 SHCC로 대체한 콘크리트 보 실험체의 휨거동 특성 및 균열제어성능은 무근 콘크리트 보에 비하여 크게 개선되었다.

• 대한치과기공학회지
• /
• 제39권2호
• /
• pp.83-91
• /
• 2017

Purpose: The objective of this study was to evaluate influence of mechanical properties of gingival shade composite resins(GSCRs) according to thermocycling treatment. Methods: The material utilized in this study was Crea.lign(CGR), Twiny flow(TGF) and Twiny(TGP). Total sixty specimens were fabricated with a dimension of $25{\times}2{\times}2mm$ according to the ISO 4049. After fabrications, specimens of before and after thermocycling(to $55^{\circ}C$ from $5^{\circ}C$) were stored in the distilled water for 24 hours at the $37^{\circ}C$. Three-point flexural test was performed in universal testing machine(Instron 5966, USA) at a crosshead speed of 1 mm/min. Flexural strength, flexural modulus and work of fracture according to the thermocycling were analyzed using a one-way ANOVA analysis. Surface analysis of GSCRs after thermocycling evaluated using the scanning electron microscope. Results: : The highest FS was measured in TGP group of NTC group and lowest in CGR group after TC. After TC, FS and FM decreased in CGR and TGP groups, but TGF increased. There was a statistically significant difference between FS and WOF in GSCRs(p<0.05). But FM did not show any significant difference after TC (p>0.05). The strength of the characteristic exceeded the flexural strength required by ISO 4049(> 80 MPa). Weibull modulus(m) showed the highest reliability in the TGP group (m = 14.22), and the reliability of the TGF and TGP groups after TC decreased. Conclusion: Thermocycling treatment is important factor influence of mechanical properties with gingival shade composite resins. Therefore, we recommended that mechanical properties need to get useful information and accuracy for life-span expectancy according to the thermocycling treatment.

• 대한치과교정학회지
• /
• 제48권2호
• /
• pp.107-112
• /
• 2018

Objective: The aim of this study was to examine the properties of fiber-reinforced composite and stainless steel twisted retainers for orthodontic retention. Methods: Three different span lengths (5.0, 8.0, and 14.0 mm) of fiber-reinforced composite were investigated. The three fiber-reinforced composite retainer groups were subdivided according to the storage condition (dry and wet), resulting in a total of six groups. Each stainless steel and fiber-reinforced composite group was comprised of six specimens. The three-point bending flexural test was conducted using a universal testing machine. ANOVA was used to assess differences in the maximum load and maximum stress according to the span length, material, and storage condition. Post-hoc comparisons were performed if necessary. Results: The maximum stress and maximum load were significantly (p < 0.001) associated with the span length, material, and storage condition. The significant interaction between the material and span length (p < 0.001) indicated the differential effects of the material for each span length on the maximum stress and maximum load, with the difference between materials being the highest for the maximum span length. Conclusions: Our findings suggest that fiber-reinforced composite retainers may be an effective alternative for orthodontic retention in patients with esthetic concerns or allergy to conventional stainless steel wires.

• 정보처리학회논문지B
• /
• 제13B권5호
• /
• pp.533-540
• /
• 2006

웹에 분산된 모든 윈 페이지는 구조가 서로 다르다. 시멘틱 웹 환경은 이형적인 구조를 갖는 웹 페이지들의 메타데이터 바탕으로 시멘틱 검색이 가능하다. 그러나 일반적으로 사용자의 요구에 따른 시멘틱 김색은 상황에 따라 엄청난 수의 검색 결과를 내놓는다. 따라서 검색 결과에 대해 각 사용자에 맞는 검색 결과 순위를 적용할 필요가 있다. Culture Finder는 시멘틱 웹 검색 에이전트들이 개인화 된 문화 정보를 검색할 수 있도록 도움을 준다. Culture Finder는 웹에 존재하는 각 웹 페이지에 대한 메타 데이터를 작성하고, 시멘틱 검색을 이행하며 사용자 프로파일을 기반으로 삼아 검색 결과에 대한 순위 점수를 계산한다. Culture Finder에는 개인화 된 시멘틱 검색을 효율적으로 실행하기 위해 중요한 5가지 기법이 적용되었다. 사용자의 검색 행위로부터 사용자 프로파일을 생성하기 위한 기계 학습기법, 시멘틱 웹 검색 에이전트를 위한 효율적인 시멘틱 검색 기법, 사용자 질의의 효과적인 파악을 위한 질의 분석 기법, 각 사용자에게 적합한 검색 결과를 제공하기 위한 순위 적용 기술, 메타데이터를 생성하기 위한 상위 온톨로지 표현 방법, 본 논문에서는 Culture Finder의 구조를 통해서 시멘틱 개인화 검색에 대한 기법을 제안한다.

• ETRI Journal
• /
• 제21권4호
• /
• pp.52-64
• /
• 1999

QoS monitoring is a kind of real-time systems which allows each level of the system to track the ongoing QoS levels achieved by the lower network layers. For these systems, real-time communications between corresponding transport protocol objects is essential for their correct behavior. When two or more entities are employed to perform a certain task as in the case of communication protocols, the capability to do so is called interoperability and considered as the essential aspect of correctness of communication systems. This paper describes a formal approach on modeling and interoperability test case generation of a real-time QoS monitoring protocol. For this, we specify the behavior of flow monitoring of transport layer QoS protocol, i.e., METS protocol, which is proposed to address QoS from an end-to-end's point of view, based on QoS architecture model which includes ATM net work in lower layers. We use a real-time Input/Output finite State Machine to model the behavior of real-time flow monitoring over time. From the modeled real-time I/OFSM, we generate interoperability test cases to check the correctness of METS protocol's flow monitoring behaviors for two end systems. A new approach to efficient interoperability testing is described and the method of interoperability test cases generation is shown with the example of METS protocol's flow monitoring. The current TTCN is not appropriate for testing real-time and multimedia systems. Because test events in TTCN are for message-based system and not for stream-based systems, the real-time in TTCN can only be approximated. This paper also proposes the notation of real-time Abstract Test Suite by means of real-time extension of TTCN. This approach gives the advantages that only a few syntactical changes are necessary, and TTCN and real-time TTCN are compatible. This formal approach on interoperability testing can be applied to the real-time protocols related to IMT-2000, B-ISDN and real-time systems.

• 대한치과기공학회지
• /
• 제31권4호
• /
• pp.37-43
• /
• 2009

This study evaluated the effect of concentration of glass fiber reinforcement on the flexural properties of auto and heat polymerized denture base resin. The test specimens($64{\times}10{\times}3.3mm$) were made of auto and heat polymerized resin(Vertex, Dentimax, Netherlands). Glass fiber(ER 270FW, Hankuk Fiber Glass, Korea) were used to reinforce the denture base resin. The 2.6%, 5.3% and 7.9% volume pre-impregnated fiber were located at the bottom of specimen. The test specimens(n=7) of each group were stored in distilled water at $37^{\circ}C$ for 50 hours before test. The flexural strength and modulus were measured by an universal testing machine(Z020, Zwick, Germany) at a crosshead speed of 5 mm/min in a three-point bending mode. The data was analyzed by one-way ANOVA and the Duncan's multiple range test(${\alpha}$=0.05). The difference of auto polymerized resin groups and heat polymerized resin groups were statistically analyzed by t-test(${\alpha}$=0.05). Glass fiber showed significant reinforcing effects on auto and heat polymerized resin. For flexural strength and modulus, auto polymerized resin was the highest in 7.9% volume, while heat polymerized resin was the highest in 5.3% volume. In this study, glass fiber at 7.9% volume ratio showed most effective reinforcing effect on auto polymerized resin and glass fiber at 5.3% volume ratio showed most effective reinforcing effect on heat polymerized resin in terms of flexural strength and flexural modulus.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.36-42
• /
• 2015

The aspherical lens was designed to be able to array a focal point. For this reason, it has very curved surface. The aspherical lens is fabricated by injection molding or diamond turning machine. With the aspherical lens, tool marks and surface roughness affect the optical characteristics, such as transmissivity. However, it is difficult to polish free form surface shapes uniformly with conventional methods. Therefore, in this paper, the ultra-precision polishing method with MR fluid was used to polish an aspherical lens with 4-axis position control systems. A Tool path and polishing mechanism were developed to polish the aspherical lens shape. An MR polishing experiment was performed using a generated tool path with a PMMA aspherical lens after the turning process. As a result, surface roughness was improved from $R_a=40.99nm$, $R_{max}=357.1nm$ to $R_a=4.54nm$, $R_{max}=35.72nm$. Finally, the MR polishing system can be applied to the finishing process of fabrication of the aspherical lens.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.263-267
• /
• 2013

The continuing demand for increasingly slimmer and brighter liquid crystal display (LCD) panels has led to an increased focus on the role of light guide panels (LGPs) or optical films that are used to obtain diffuse, uniform light from the backlight unit (BLU). The most basic process in the production of such BLU components is the micromachining of V-shaped grooves. Thus, given the current trend, micromachining of V-shaped grooves is expected to play increasingly important roles in today's manufacturing technology. LCD BLUs comprise various optical elements such as a LGP, diffuser sheet, prism sheet, and protector sheet with V-shaped grooves. High-aspect-ratio patterns are required to reduce the number of sheets and enhance light efficiency, but there is a limit to the aspect ratio achievable for a given material and cutting tool. Therefore, this study comprised a series of experimental evaluations conducted to determine the machining limit in microcutting V-shaped grooves on electroless nickel plated die materials when using single-crystal diamond tools with point angles of $20^{\circ}-80^{\circ}$. Cutting performance was evaluated at various cutting speeds and depths of cut using different machining methods and machine tools. The experimental results are that V-shaped patterns with angles of $80^{\circ}$ or up can be realized regardless of the machining conditions and equipment. Moreover, the feed rate has little effect on machinability, and it is thought that the fly-cut method is more efficient for shallow patterns.

• 한국터널지하공간학회 논문집
• /
• 제8권3호
• /
• pp.197-204
• /
• 2006

대단면 쉴드 TBM을 이용한 터널굴착공법은 여러 기계화 시공법과 함께 향후 터널 연장의 장대화 추세에 부합하여 국내 활용도가 더욱 높아질 것으로 예상되는 터널 굴착공법이다. 특히 쉴드공법은 지반조건이 열악한 얕은 심도의 터널에 적용성이 우수한 공법으로 인식되고 있으나, 부적절한 장비선정, 터널 시공중 장비결함, 예상치 못한 지반조건 조우 등의 문제로 인하여 시공 중 사고 트러블 사례가 종종 발생되고 있다. 특히 터널막장에서의 트러블 발생 빈도가 매우 높아, 안정적이고 효율적인 굴착을 위해서는 굴착중 막장압 관리가 매우 중요하다. 따라서 본 연구에서는 터널막장의 안정화를 위한 이론적 막장지보압 산정방법의 고찰과 수치해석적 방법에 의한 지보압에 따른 지반거동 양상을 비교 분석 하였다.