• 대한전기학회논문지
• /
• 제40권6호
• /
• pp.619-625
• /
• 1991

Phenomena of streaming electrification of insulting oil(T.O) is studied where the oil is contacted with solid insulating materials when it is pumped through a circulating system in a large power transformer. The leakage current, the electrical potential at the neutral terminal point of the transformer and the surface electrical potential of the oil are investigated. And the leakage current from the neutral terminal point is measured as a function of a bias polarity applied to a transformer case to investigate the polarty of ion which is absorbed in the case at the interface between the case and oil. As a result, it is found that insulating materials, and it is suggested that the leakage current is the sum of the relaxation current by positive charge from insulating oil to the neutral terminal point and by electrification current from negative charge electrified by the contact with solid insulating materials.

• 대한전기학회논문지
• /
• 제43권4호
• /
• pp.594-600
• /
• 1994

The maximum charge accumulation in transformers caused by streaming electrification is commonly observed on the bottom area of transformer winding(i.e.the oil inlet of transformer winding). It is because turbulent flows occur in this portion of transformers. Consequently, if we are to reduce the maximum charge accumulation of transformers, it is important that we should have a good understanding of the conditions of the occurence of partial turbulent flows in the oil inlet of transformer winding. With this point in mind, a simple flow model was designed in this study in order to simulate oil flow in the insulation ducts of power transformers. As a method for mitigating charge accummulation, attention was given to (a) a flow path design for the improvement of flow conditions, and (b) the charge tendency of the material used this design. The results of this study show that the above method is useful for mitigating charge accumulation.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.19-33
• /
• 1999

This paper is concerned with developing a standard costing model based on the case study of PECT and GCT and analysing their profitability in order to improve operation efficiency and design business strategy. In doing so, the model can be a useful tool to analyze current calculation system of lease charge at the two terminals and to judge whether the level of lease charge currently applied to them is justifiable for their profitability. This paper also deals with break-even analysis of container terminal operating companies on the basis of the model and forecast of their profitability. On the top of that, it tries to look into the arguments and to suggest proposals for improving their profitability.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.183-188
• /
• 2011

In this article, the effect of the crystal structural environment of $Pr^{3+}$ ions on the photoluminescence (PL) characteristics of double tungstates, such as $A(M_{1-X}Pr_X)W_2O_8$ (A=Li, Cs, M = In, Y, Sc, La; $0.007{\leq}x{\leq}0.1$) and $La_{1.96}Pr_{0.04}W_3O_{12}$ are characterized. By varying the ion radius in A and M sites, the structural environment of $Pr^{3+}$ ions were modified. The structural criteria, that is, the point charge electrostatic potentials V around the $Pr^{3+}$ activator, were calculated using the crystal structural parameters. The point charge potential V can be a valid criterion for $^3P_o$ quenching in various double tungstates. When the calculated V values are large (> 6.0), the luminescence from the $^3P_0$ level becomes dominant. When the calculated V values are about 3.8, the $^1D_2$ line appears weakly but $^3P_0$-level luminescence is absent. When the calculated V values are small (< 2.0), the luminescence from the $^1D_2$ level becomes dominant and $^3P_0$-level luminescence is absent. At 2.0$^3P_o$ quenching to $^1D_2$ level occurs substantially in accordance with the structural criterion of the point charge potential model.

• 자원ㆍ환경경제연구
• /
• 제21권1호
• /
• pp.175-210
• /
• 2012

2012년부터 유기성 폐기물의 해양투기가 전면 금지됨에 따라 우리나라도 이러한 국제 협약을 준수해야 한다. 이에 따라 유기성 폐기물을 대폭 저감하기 위해 다양한 방법들이 제시되고 있으나 바이오가스화는 배출량 저감과 동시에 에너지 생산이 가능하다는 점에서 가장 주목받는 기술이다. 그러나 경제성이 낮기 때문에 정부 보조가 불가피한데 7,800여억 원에 이르는 보조금에 대한 재원 확보가 시급한 상황이다. 한편 축산분뇨나 음식물 쓰레기, 하수 슬러지 등의 유기성 폐기물은 비접오염원에 해당된다. 비접오염원에 대한 직접적인 배출부과금 제도는 오염원과 오염 수준 간의 높은 불확실성으로 인해 실효성이 낮은 것으로 평가되어 왔다. 본 연구에서는 유기성 폐기물의 배출과 간접적으로 관련 있는 축산물 생산량 혹은 식품 소비에 대한 간접 배출부담금 제도를 제안하고, 그 세원을 바이오가스 산업에 대한 보조금으로 이용하는 방안의 경제적 환경적 효과를 비교하였다. 연산가능일반균형모형을 이용하여 분석한 결과, 축산물 생산에 대한 간접부담금은 식품 소비에 대한 부담금에 비해 특정 부문에 과세 부담이 집중되며, 거시적으로는 GDP와 총소비가 식품 소비에 대한 부담금에 비해 더 감소하는 것으로 나타났다. 또한 온실가스 저감 측면에서도 식품 소비에 대한 간접부담금이 우수한 것으로 나타났다. 따라서 유기성 폐기물 배출을 단기에 감소시키고, 이를 에너지로 전환하기 위해 필요한 재원 확충 농반으로 음식 및 식품 소비에 대한 간접부담금이 축산물 생산에 대한 간접부담금보다 적절한 것으로 분석되었다.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.142-149
• /
• 2011

This paper presents a new state of charge(SOC) estimation of large capacity of Li-ion battery (LIB) based on the multiple model adaptive estimation(MMAE) method. We first introduce an equivalent circuit model of LIB. The relationship between the terminal voltage and the open circuit voltage(OCV) is nonlinear and may vary depending on the changes of temperature and C-rate. In this paper, such behaviors are described as a set of multiple linear time invariant impedance models. Each model is identified at a temperature and a C-rate. These model set must be obtained a priori for a given LIB. It is shown that most of impedances can be modeled by first-order and second-order transfer functions. For the real time estimation, we transform the continuous time models into difference equations. Subsequently, we construct the model banks in the manner that each bank consists of four adjacent models. When an operating point of cell temperature and current is given, the corresponding model bank is directly determined so that it is included in the interval generated by four operating points of the model bank. The MMAE of SOC at an arbitrary operating point (T $^{\circ}C$, $I_{bat}$[A]) is performed by calculating a linear combination of voltage drops, which are obtained by four models of the selected model bank. The demonstration of the proposed method is shown through simulations using DUALFOIL.

• 한국자기공명학회:학술대회논문집
• /
• 한국자기공명학회 2002년도 International Symposium on Magnetic Resonance
• /
• pp.89-89
• /
• 2002

• 대한화학회지
• /
• 제21권1호
• /
• pp.23-31
• /
• 1977

Octahedral symmetry 를 지닌 리간드에 의한 영향 아래있는 하나의 d전자를 갖는 금속 착물을 대상으로, 결정장 분리계수 10Dq를 결정장이론에 의하여 이론적으로 계산하였다. 점전하 모형을 쓰되, Shull-Lowdin 함수를 사용하여 배치간 작용을 고려하고, Integral Hellmann-Feynman Theorem을 써서 고차섭동의 영향을 추출하였다. 고차섭동의 영향이 일차섭동의 약 $50{\%}$가 됨을 알았다. Octahedral potential에 의해 3d 함수의 각 성분의 변화가 없고, $E_g\;와\;T_{2g}$상태에서, 동경성분의 변화가 일정하므로 10Dq는 유일한 파라미터로 남을 것이라는 결론을 얻었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권1호
• /
• pp.59-69
• /
• 2002

A semi-analytical model based on exact numerical analysis of the 2DEG channel in pseudo-morphic HEMT (PMHEMT) is presented. The exactness of the model stems from solving both Schrodinger's wave equation and Poisson's equation simultaneously and self-consistently. The analytical modeling of the device terminal characteristics in relation to the charge control model has allowed a best fit with the geometrical and structural parameters of the device. The numerically obtained data for the charge control of the channel are best fitted to analytical expressions which render the problem analytical. The obtained good agreement between experimental and modeled current/voltage characteristics and small signal parameters has confirmed the validity of the model over a wide range of biasing voltages. The model has been used to compare both the performance and characteristics of a PMHEMT with a competetive HEMT. The comparison between the two devices has been made in terms of 2DEG density, transfer characteristics, transconductance, gate capacitance and unity current gain cut-off frequency. The results show that PMHEMT outperforms the conventional HEMT in all considered parameters.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.432-445
• /
• 1994

From a theoretical analysis point of view, the 2-stage precipitator is decomposed into two units: charging cell and collecting cell. Collection efficiency predictions of the two-stage parallel-plate electrostatic precipitator have been performed theoretically incorporating with the charging and the collecting cells. Particle trajectorise passing the charging cell have been modeled as a simple one. Particle charge distribution at the outlet of the charging cell is calculated through integration of the present unipolar combined charging rate along the entire particle trajectory, and average charge of particles at the outlet of the charging cell is obtained from the particle charge distribution. As for the collecting cell, the diminution of particle concentration along the longitudinal direction of the collecting cell is investigated considering the conventional Deutsch's theory and the laminar theory. One should note that the collection efficiency formula derived is based on monodisperse aerosols. It has been confirmed through the analysis that predictions of particle charge by applying White's unipolar diffusion charging theory overpredict actual cases in the continuum regime, while predictions by Fuch's unipolar diffusion charging theory indicate the reasonable result in the same regime. Theoretical predictions of collection efficiency are also compared with the available experimental results. Comparisons show that the experimental results are consistently located in the collection efficiency region bounded by the two limits, the Deutsch and the laminar collection efficiencies. Finally design parameters of the 2-stage electrostatic precipitator have been investigated systematically through the one-variable-at-a-time method in terms of collection efficiency. Applied voltages on the corona wire of the charging cell and the plate of the collecting cell, and the average air velocity have been selected as the design parameters.