• International Journal of CAD/CAM
• /
• v.7 no.1
• /
• pp.51-60
• /
• 2007

This paper presents an algorithm of optimal cutting tool selection for machining of the point-based surface that is defined by a set of surface points rather than parametric polynomial surface equations. As the ball-end and fillet-end mills are generally used for finish machining in a 3-axis computer numerical control machine, the algorithm is applicable for both cutters. The optimum tool would be as large as possible in terms of the cutter radius and/or corner radius which maximise (s) the material removal rate (i.e., minimise (s) the machining time), while still being able to machine the entire point-based surface without gouging any surface point. The gouging are two types: local and global. In this paper, the distance between the cutter bottom and surface points is used to check the local gouging whereas the shortest distance between the surface points and cutter axis is effectively used to check the global gouging. The selection procedure begins with a cutter from the tool library, which has the largest cutter radius and/or corner radius, and then adequacy of the point-density is checked to limit the accuracy of the cutter selection for the point-based surface within tolerance prior to the gouge checking. When the entire surface is gouge-free with a chosen cutting tool then the tool becomes the optimum cutting tool for a list of cutters available in the tool library. The effectiveness of the algorithm is demonstrated considering two examples.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.93-99
• /
• 2002

In general, manufacturing error is originated from bad material, machine tool defection and tool breakage. When the manufacturing process is stable, the most of error come from the tool wear. In common on-machine measurement teaching probe and touch sensor are widely used however in this paper the electric touch point type automatic tool compensation system is developed the performance of it is validated and effective operating is proposed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.153-154
• /
• 2006

Development of sorting machine for photo diode and its control system is addressed. The sorting machine for optical communication device requires high positional precision because the alignment is one of the most important point in the sorting process. This sorting method describes how to detect the target chip's angle and position from the wafer. The machine vision system is used for the feedback control. This sorting machine is implemented by motion controller, machine vision and various solenoid valve and is interfaced with RS-232c, GPIB and PCI communication. This system gets the position accuracy within $1{\mu}m$ with our experiments.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.561-568
• /
• 2022

This study investigated how pre-service English teachers perceive the effects of machine teaching on their English writing competence. 35 Korean students who are majoring in English education participated in this study. The participants used machine translators for one of the required courses related to English composition. A survey and focus group interview were conducted at the end of the course. They were asked to answer to what degree they perceive the effects of machine translators on their writing in terms of lexical, sentential, and discourse levels. Furthermore, their perspectives on the effects of machine translation on English teaching including limitations of machine translators, were interviewed in more detail. The results show that the participants perceive machine translators quite positively in terms of improving their writing competence, but they also point out some critical limitations of machine translators. These findings have some pedagogical implications for English writing course instructors, English teacher educators, and program developers.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.4
• /
• pp.436-443
• /
• 2007

In this paper, an intelligent method called BELBIC (Brain Emotional Learning Based Intelligent Controller) is used to control of Locally Linear Neuro-Fuzzy Model (LOLIMOT) of Washing Machine. The Locally Linear Neuro-Fuzzy Model of Washing Machine is obtained based on previously extracted data. One of the important issues in using BELBIC is its parameters setting. On the other hand, the controller design for Washing Machine is a multi objective problem. Indeed, the two objectives, energy consumption and effectiveness of washing process, are main issues in this problem, and these two objectives are in contrast. Due to these challenges, a Multi Objective Genetic Algorithm is used for tuning the BELBIC parameters. The algorithm provides a set of non-dominated set points rather than a single point, so the designer has the advantage of selecting the desired set point. With considering the proper parameters after using additional assumptions, the simulation results show that this controller with optimal parameters has very good performance and considerable saving in energy consumption.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2004.11a
• /
• pp.335-341
• /
• 2004

According to the improvements of the education and the cultural level, the noise pollutions which have been occupying a major portion of civil petitions about environment is gradually aggravating. Especially, the plumbing noises which took place at machine room of dormitory are the compositive shapes of an air-borne sounds and a solid-borne sounds. So it has been causing to injure the comfortable residential environment of residents that it is propagated in a residential space. Judging from this point of view, this study grasped the propagation and the properties of attenuation about four varieties's plumbing noise which took place at machine room to understand that it cause influences to a residential space. In this point, we understand the peculiar features by measuring noise, which was generated from equipment in machine rooms of three dormitories having different features. On the basis of these features, we examine all predictability and reliability in comparing the predictive value with the measurable one, using architectural acoustic simulation.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.2
• /
• pp.69-77
• /
• 2001

This paper describes a method of calculating the feedrate for the constant cutting speed at a CL-point in 5-axis machining. Unlike 3-axis machining, 5-axis machining has the flexibility of the tool motions due to two rotation axes. But the feedrate at joint space differs from the feedrate at a tool tip(the CL-point) of the 3D Euclidean space for the tool motions. The proposed algorithm adjusts the feedrate based on 5-axis NC data, the kinematics of a machine, and the tool length. The following calculations is processed for each NC block to generate the new feedrate; 1) calculating the moving distance at the CL-point, 2) calculating the moving time by the given feedrate, 3) calculating the feedrate of each axis, 4) getting the new feedrate. The proposed algorithm was applied to a 5-axis machine which had a tilting spindle and a rotary table. Totally, the result of the algorithm reduced the machining time and smoothed the cutting-load by the constant cutting speed at the CL-point.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.838-841
• /
• 2000

To improve the accuracy of products and improve the product quality, we need to enhance the machining accuracy of the machine tools. To this point of view, measurement and inspection of finished part as well as error analysis of machine tools has been studied for last several decades. OMM(On the Machine Measurement) has been issued to alternate with CMM, pointing out disadvantages of high expenses and lots of setting time in CMM. In this paper, we study 1) the spherical surface manufacturing by volumetric error compensation of machine tool, 2) the system development of OMM without detaching work piece from a bed of machine tool after working. 3) the generation of the finished part profile by On the machine measurement. Furthermore, the output of OMM is compared with that of CMM, and verified the feasibility of the measurement system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.378-381
• /
• 2003

Efficient development of method on a performance evaluation for machine tools has been regarded as the most important work for accuracy and quality enhancement to every user and manufacturer. A evaluation method of accuracy for machine tools has been studied recently according to the rapid increase of interest in precision machine tools. To this point of view, the circular interpolation test of machine tools is recognized as the most useful method to distinguish a dynamic accuracy of NC machine tools by ISO and ANSI/ASME, etc. In this paper, we have studied and developed the form measurement system with grid encoder to analyse the final accuracy of NC machine tools. we have analyzed the servo system error and geometric error of NC machine tools through measuring a dynamic error signal by this system. and then we verified the experimental result and enhanced the reliability by means of comparing the characteristics of the developed system with the kinematic ball-bar system.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.117-136
• /
• 2014

The purpose of this study is to present a classification system of the hand-made and machine-made lace according to the configuration method and re-make the category and definition of lace to consider the emergence and development of major laces techniques. The re-made category and definition of the lace is as follows. The lace usually consists of ground and motifs, however, the techniques of netting and sprang are suitable for making ground than motif, so I think it is appropriate to exclude them from the category of the lace. Many scholars are excluded openwork embroidery fabric from the category of the lace. But, an openwork embroidery fabric is the basis of a needle point lace called true lace and is consist of motif and ground. I think it is appropriate to include it in the category of the lace. I think it is also appropriate to include in the category of the lace that the eyelet embroidery fabric which mimics the openwork embroidery fabric in the machine. Lace is redefined that a fabric with openwork decoration consists of motif and ground, constructed by a variety of ways such as plaiting, twisting, looping, knotting of threads or embroidering by hand or machine. The classification of the lace is presented as follows. Hand-made lace is classified bobbin lace, needle point lace, embroidery lace, knotted lace, crochet lace, and knitting lace. Machine-made lace is classified raschel lace, leaver lace, torchon lace, and machine-made embroidery laces which include tool lace, eyelet embroidery lace, chemical lace, etc.