• Journal of Oral Medicine and Pain
• /
• v.30 no.3
• /
• pp.345-351
• /
• 2005

The purpose of this double-blind study was to evaluate clinical effects of botulinum toxin type A (BTX-A) injection on myofascial pain syndrome (MPS) involving upper trapezius and compare with those of lidocaine injection. 21 patients presenting with active TrP1 and/or TrP2 in the upper trapezius over 6 months were selected for this study. The subjects were randomly divided into two groups; one group injected with BTX-A (15 unit of $Botox^{(R)}$ / 0.3 ml per trigger point (TrP)) and the other group injected with 0.5% lidocaine (0.3 ml /TrP). The clinical effects were evaluated by VAS and PPT at baseline, 2, 4, 6 and 8 weeks after treatment. BTX-A group showed persistent decrease of VAS values and increase of PPT values following treatment. While there was no significant difference in VAS values between BTX-A and lidocaine groups (p=0.347), there was significant difference in PPT values after treatment between two groups (p=0.000). The subjects received BTX-A showed noticeable improvement in PPT values after treatment, suggesting more reliable effect of BTX-A injection compared with lidocaine injection. The results of this study support that the direct injection of BTX-A to a TrP is an effective and safe treatment for MPS involving upper trapezius.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.53-59
• /
• 2009

The analysis of injection molding process by CAE is widely used in development of plastic products. That comes from the fact that CAE analysis can reduce trial and error based on optimized design. On this study, by use of MOLDFLOW, the causes of product defects were found and solved by trade-off study. CAE analysis includes Flow-Cool-Warpage Analyses and finally a new mold-die design with better product quality was suggested. On injection molding of round-shaped plastic fan, new mold-die system with 4-tunnel gates located on the edge of a fan disc shows better quality rather than pin-point gate located on the center of a disc. That was effective in terms of flow mark removal and flatness improvement of the product.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.249-256
• /
• 2000

In order to investigate the effectiveness of methanol, which has high latent heat of evaporation and oxygen contents, for DI diesel engine performance and exhaust emission, the methanol was injected at the suction port of DI diesel engine. The injector used for test was conventional gasoline engine injector and controlled the quantity of methanol per cycle by the power supply controller which designed specially for injector. The results shown that the maximum pressure point was delayed, the value of maximum pressure was decreased, and the concentrations of both NOx and Soot were decreased, as the methanol injection quantity increased, and also the thermal efficiency of engine injected methanol under the high load condition was similar to no methanol injection but under the medium load condition was decreased within the experimental conditions.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.604-614
• /
• 2018

This paper proposes a synchronous switching technique for a Vienna rectifier that uses carrier-based pulse width modulation (CB-PWM). A three-phase Vienna rectifier, similar to a three-level T-type converter with three back-to-back switches, is used as a PWM rectifier. Conventional CB-PWM requires six independent gate signals to operate back-to-back switches. When internal switches are operated synchronously, only three independent gate signals are required, which simplifies the construction of gate driver circuits. However, with this method, total harmonic distortion of the input current is higher than that with conventional CB-PWM switching. A reactive current injection technique is proposed to improve current distortion. The performance of the proposed synchronous switching method and the effectiveness of the reactive current injection technique are verified using simulations and experiments performed with a set of Vienna rectifiers rated at 5 kW.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.83-89
• /
• 1999

A Unified model for the alpha-particle-induced charge collection has been developed. By accounting for funneling and diffusion charges separately, new model accurately describes the dependence of collected charge on junction size, junction bias, injection energy, injection angle, injection point, and trench oxide depth.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.12 s.243
• /
• pp.1285-1290
• /
• 2005

A theoretical analysis of an annular injection supersonic ejector equipped with a second-throat was developed under the assumption that the secondary flow is choked aerodynamically by interaction with primary flow in the mixing chamber. The predicted secondary flow pressure agrees reasonably well with the measurements. Using the analysis, the compression ratio, the secondary flow Mach number, and the location of the choking point were presented in terms of entrainment ratio.

• Journal of fish pathology
• /
• v.18 no.3
• /
• pp.287-292
• /
• 2005

In the present study, immune gene expression of rainbow trout, Oncorhynchus mykiss, against bacterial endotoxin (LPS) was studied in vivo. The expression of prointflammatory cytokine genes (IL-1$\beta$ and TNF-$\alpha$) and IFN-related genes (IRF-I, Mx-3) at gill was assessed by RT-PCR at different time point of day1 and day 3 post-injection. It was shown that the proinflammatory cytokine gene expression at gill was induced 1 day after LPS injection but the expression was not sustained until day 3. Meanwhile upregulated expression of IFN-related genes was found to be only at day 3 post injection, indicating indirect effect of LPS on these genes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.110-116
• /
• 1994

In this research, the tensile strength of molded parts and pressure distribution were analyzed to study the cavity filling stage and packing stage in injection molding. The measurement of cavity pressure was obtained by a data acquisition system with the installation of transducers in the cavity. Molded parts were tested by a universal testing machine to obtain the tensile strength. For the experimental work, the tensile strength of molded parts increased with longer packing time and exact freezing time of the gate was obtained by a cavity pressure curve. In addition, the effect of packing did not occur and tensile strength was almost constant after early 1.5 sec of the freezing time of gate. Density tended to be higher about 0.2% due to a larger degree of mold temperature and melt temperature. Also, changing pressure in the cavity was effectively sensed. Thereafter, the possibility of the development of pattern recognition expert system was confirmed on the basis of the experimental results.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2109-2118
• /
• 2016

Based on the space vector pulse width modulation (SVPWM) theory, this paper realizes an easier SVPWM strategy, which is equivalently implemented by CBSPWM with zero-sequence voltage injection. The traditional SVPWM strategy has no effect on controlling the neutral-point voltage balance. In order to solve the neutral-point voltage unbalance problem for neutral-point-clamped (NPC) three-level inverters, this paper proposes a neutral-point voltage balance controller. The proposed controller realizes controlling the neutral-point voltage balance by dynamically calculating the offset superimposed to the three-phase modulation waves of an equivalent SVPWM strategy. Compared with the traditional SVPWM strategy, the proposed neutral-point voltage balance controller has a strong ability to balance the neutral-point voltage, has good steady-state performance, improves the output waveforms quality and is easy for digital implementation. An experiment has been carried out on a NPC three-level inverter prototype based on a digital signal processor-complex programmable logic device (DSP-CPLD). The obtained experimental results verify the effectiveness of the proposed neutral-point voltage balance controller.

• The Korean Journal of Pain
• /
• v.6 no.2
• /
• pp.224-230
• /
• 1993

Most patients who have suffered from pain and muscle weakness on femoral nerve distributing area show no definite pathologic finding on X-ray or laboratory examinations. Therefore proper diagnosis is difficult to determine for the proper treatment of the symptoms. Based on my clinical experiences and anatomical studies, I have found most of these symptoms are a result of femoral nerve compression on trigger point of psoas major muscle. Accordingly, releasing the compression of femoral nerve by Laser stimulation and local anesthetic injection to the identified trigger point of psoas major muscle was found to be an effective treatment for femoral neuralgic pain.