• Title/Summary/Keyword: Pohang area

Search Result 530, Processing Time 0.028 seconds

EXPERIMENTAL APPROACHES FOR WATER DISCHARGE CHARACTERISTICS IN PEMFC USING NEUTRON IMAGING TECHNIQUE AT CONRAD, HMI

  • Kim, Tae-Joo;Kim, Jong-Rok;Sim, Cheul-Muu;Lee, Sung-Ho;Son, Young-Jin;Kim, Moo-Hwan
    • Nuclear Engineering and Technology
    • /
    • v.41 no.1
    • /
    • pp.135-142
    • /
    • 2009
  • In this investigation, we prepared a 1 and 3-parallel serpentine single PEMFC, which has an active area of $100\;cm^2$ and a flow channel cross section of $1{\times}1mm$. Distribution and transport of water in a non-operating PEMFC were observed by varying flow types and the flow rates (250, 400, and 850 cc/min). This investigation was performed at the neutron imaging facility at the CO1d Neutron RAdiography facility (CONRAD), HMI, Germany of which the collimation ratio and neutron fluence rate are 250, $1{\times}10^{6}n/s/cm^2$, respectively. The neutron image was continuously recorded by a scintillator and lens-CCD coupled detector system every 10 seconds. It has been observed that although the distilled water was supplied into the cathode channel only, the neutron image showed a water movement from the cathode to the anode channel. The water at the cathode channel was completely discharged as soon as the pressurized air was supplied. But the water at the anode channel was not easily removed by the pressurized air except for the 3-parallel serpentine type with 850cc/min of air flow rate. Moreover, the water at the MEA wasn't removed for any of the cases.

Analysis of Relationships Between Topography/Geology and Groundwater Yield Properties at Pohang using GIS (GIS를 이용한 포항시 지형 및 지질과 지하수 산출능력 간의 상관관계 분석)

  • Lee, Sa-Ro;Kim, Yong-Sung;Kim, Nam-Jin;Ahn, Kyoung-Hwan
    • Economic and Environmental Geology
    • /
    • v.41 no.1
    • /
    • pp.115-131
    • /
    • 2008
  • The aim of this study is to analyze relationships between topography/geology which affects physically groundwater regime and groundwater yield properties in Pohang City using Geographic Information System (GIS). For the purpose, topographic factors such as ground elevation, ground elevation difference, ground slope, and ground regional slope, and hydrogeologic unit, and groundwater yield properties factors such as transmissivity, specific capacity, and well yield, were constructed to spatial data base. Then the relationships between topography, geology and groundwater yield properties were analyzed quantitatively using GIS overlay technique. As the results, ground-water yield of unconsolidated sediments and porous volcanic rocks is the highest among the hydrogeologic units of study area, and clastic sedimentary rock is the lowest. There are positive relationship between the elevation and elevation difference and the groundwater yield properties and negative relationship between the topographic slope and the groundwater yield properties.

Interaction between RuO2 and Carbon Nanotubes - Photoemission and X-ray Absorption Study

  • Lee, Seung-Youb;Kim, Yoo-Seok;Jeon, Chel-Ho;Ihm, Kyu-Wook;Kang, Tai-Hee;Park, Chong-Yun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.02a
    • /
    • pp.567-567
    • /
    • 2012
  • Since the carbon nanotubes (CNTs) have extraordinary material properties, many researchers are trying to make a practical application in various fields [1]. In particular, the high surface area of CNTs was fascinated for nano-template on the catalytic system. $RuO_2$ coated CNTs are useful functional nano-composites in many applications, including super capacitors, fuel cells, biosensors, and field emitters. However, the research of interaction between CNTs and $RuO_2$ was not satisfied with various fields [2]. In this study, we will introduce the change of chemical and electrical state of $RuO_2$/CNTs at different temperatures by synchrotron radiation photoemission spectroscopy (SRPES). The t-MWCNTs used in this experiment were grown on the Ni/TiN/Si substrates by chemical vapor deposition. $RuO_2$ of 4-20 nm in thickness was deposited on the t-MWNTs by sputter. The SRPES measurements were carried out at the 4B1 beamline of the Pohang Accelerator Laboratory in Korea. The result of XPS measurement indicates that the deposited $RuO_2$ on the CNTs was reduced into pure Ru at above $300^{\circ}C$. And we confirmed that the effective work function of $RuO_2$/CNTs was decreased with increasing temperature.

  • PDF

Synthesis of Nanocrystalline ZnFe2O4 by Polymerized Complex Method for its Visible Light Photocatalytic Application: An Efficient Photo-oxidant

  • Jang, Jum-Suk;Borse, Pramod H.;Lee, Jae-Sung;Jung, Ok-Sang;Cho, Chae-Ryong;Jeong, Euh-Duck;Ha, Myoung-Gyu;Won, Mi-Sook;Kim, Hyun-Gyu
    • Bulletin of the Korean Chemical Society
    • /
    • v.30 no.8
    • /
    • pp.1738-1742
    • /
    • 2009
  • Nanocrystalline Zn$Fe_2O_4$ oxide-semiconductor with spinel structure was synthesized by the polymerized complex (PC) method and investigated for its photocatalytic and photoelectric properties. The observation of a highly pure phase and a lower crystallization temperature in Zn$Fe_2O_4$ made by PC method is in total contrast to that was observed in Zn$Fe_2O_4$ prepared by the conventional solid-state reaction (SSR) method. The band gap of the nanocrystalline Zn$Fe_2O_4$ determined by UV-DRS was 1.90 eV (653 nm). The photocatalytic activity of Zn$Fe_2O_4$ prepared by PC method as investigated by the photo-decomposition of isopropyl alcohol (IPA) under visible light (${\geq}$ 420 nm) was much higher than that of the Zn$Fe_2O_4$ prepared by SSR as well as Ti$O_{2-x}N_x$. High photocatalytic activity of Zn$Fe_2O_4$ prepared by PC method was mainly due to its surface area, crystallinity and the dispersity of platinum metal over Zn$Fe_2O_4$.

Thickness Analysis of the Alluvium and Yeonil Group in Pohang Area through the Microtremor HVSR Techniques (상시미동 HVSR 기법 적용을 통한 포항지역의 충적층 및 연일층군의 층후 분석)

  • Kim, Jeonghyun;Ki, Jungseok;No, Younghwa
    • The Journal of Engineering Geology
    • /
    • v.31 no.2
    • /
    • pp.211-222
    • /
    • 2021
  • The magnitude 5.4 earthquake occurred in 2017 near 7.5 km north of Buk-gu, Pohang. In order to find out the characteristics of microtremor in Buk-gu, Pohang, Gyeongsangbuk-do, where earthquake damage occurred significantly, a total of 39 points were acquired to analyze the horizontal to vertical spectral ratio (HVSR). Microtremor vary from region to region, so the resonant frequency of the region is obtained by examining the microtremor. For Thickness analysis, we analyze the structure and properties of shear wave velocity (Vs) up to the underlying rock to compare resonance frequencies to match the horizontal to vertical spectral ratio (HVSR) analysis technique against nearby boring data. Using F0 = Vs/4H with a resonance frequency of alluvium is 1.3 ± 0.07 Hz and a resonance frequency of Yeonil group is 0.69 ± 0.22 Hz, the alluvium thickness was found to be 26~30 m and the Yeonil group thickness was 170~250 m.

Temperature and magnetic field dependent optical properties of superconducting $MgB_2$ thin film (초전도 $MgB_2$ 박막의 온도와 장기장의 변화에 따른 광학적 성질)

  • Jung, J. H.;Lee, H. J.;Kim, K. W.;Kim, M. W.;Noh, T. W.;Wang, Y. J.;Kang, W. N.;Jung, C. U.;Lee, Sung-Ik
    • Progress in Superconductivity
    • /
    • v.3 no.1
    • /
    • pp.31-35
    • /
    • 2001
  • We investigated the temperature and magnetic field dependent optical properties of a$ MgB_2$ thin film in the far-infrared region. In the superconducting state, i.e. 5 K, we obtained the values of superconducting gap $2\Delta$ ~ 5.2 meV and $2\Delta$ $_{k}$ $B/T_{c}$ ~1.8. Although the value of$ 2\Delta$$B/T_{c}$ was nearly half of the BCS value, the $2\Delta$ seemed to follow the temperature dependence of the BCS formula. Under the magnetic field (H), the superconducting state became suppressed. Interestingly, we found that the normal state area fraction abruptly increased at low field but slowly increased at high field. It did not follow the H-dependences predicted for a s-wave superconductor (i.e. a linear dependence) nor for a s-wave one (i.e. $H^{1}$2/ dependence). We discussed the complex gap nature of $MgB_2$ in comparison with two gap and anisotropic s-wave scenarios.ios.

  • PDF

Diagnostic Usefulness of Digital Infrared Thermal Image in Carpal Tunnel Syndrome (수근관 증후군에서 적외선 체열 검사의 진단적 유용성)

  • Park, Jihyun;Lee, Jang Woo;Lee, Sang Eok;Kim, Byung Hee;Park, Dougho
    • Clinical Pain
    • /
    • v.18 no.2
    • /
    • pp.70-75
    • /
    • 2019
  • Objective: The purpose of this study is to evaluate the usefulness of infrared thermography in patients with carpal tunnel syndrome by comparing with electrodiagnostic and ultrasonographic findings. Method: From January 2014 to October 2017, electrodiagnosis, ultrasound, and digital infrared thermal image (DITI) of unilateral carpal tunnel syndrome diagnosed in a single hospital were retrospectively analyzed. The subjects with bilateral symptoms of carpal tunnel syndrome, peripheral vascular disease, diabetes, thyroid disease, fibromyalgia, rheumatic disease, systemic infection, inflammation, malignant tumor, and other musculoskeletal disorders such as finger osteoarthritis, peripheral neuropathy, cervical radiculopathy, and the previous history of surgery were excluded. Results: Of 53 patients diagnosed with carpal tunnel syndrome, 11 were male and 42 were female. The visual analogue scale was 4.9 ± 1.9, and the duration of symptom was 11.8 ± 12.5 months. There was no statistically significant difference in the body surface temperature between the unaffected and affected sides. The severity of symptoms, electrodiagnostic findings, and cross-sectional area of the median nerve significantly correlates to each other. The temperature difference between the second fingers of the affected and unaffected sides showed a weak correlation with the amplitude of sensory nerve action potential and onset latency of compound muscle action potential, when there was no significant correlation with the other parameters. Conclusion: The difference in temperature on the surface of the body, which can be confirmed by DITI, is little diagnostic value when DITI is performed in unilateral carpal tunnel syndrome patients, especially when compared with ultrasonography.

Evaluation of Design Response Spectrum in Sejong City Using Gyeongju and Pohang Type Seismic Waves (경주·포항형 지진파에 대한 세종시 지역의 설계응답스펙트럼 성능평가)

  • Oh, Hyun Ju;Lee, Sung Hyun;Park, Hyung Choon
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.44 no.4
    • /
    • pp.503-512
    • /
    • 2024
  • In the seismic design standard, input waves for different levels of seismic performance are proposed in the form of design response spectra. At the time of establishing these standards, measured records of significant earthquakes that occurred domestically, such as the 2016 Gyeongju earthquake and the 2017 Pohang earthquake, were not included. Additionally, for the ground response analysis, shear wave velocities representing ground amplification characteristics were derived from the results of standard penetration tests (N-values) and applied in empirical formulas. This approach may not adequately capture sufficient information about the characteristics of domestic ground properties. Therefore, in this study, seismic records from the Gyeongju and Pohang earthquakes were modified to adjust the bedrock standard design response spectra. Ground response analyses were conducted using shear wave velocity profiles obtained from borehole tests in the Sejong City area. The shape of the response spectrum and ground amplification coefficient obtained from the ground response analysis were then compared with those from existing studies and seismic design standard.

Estimation of the Traffic Flow in the Korea Coastal Waterway by Computer Simulation (우리나라 연안의 해상교통관제시스템 설치를 위한 기초연구 시뮬레이션에 의한 우리나라 연안의 해상교통량 추정)

  • 구자윤;박양기;이철영
    • Journal of the Korean Institute of Navigation
    • /
    • v.12 no.1
    • /
    • pp.85-112
    • /
    • 1988
  • From the point of view of safety of life and property at sea and the protection of the marine environment, the Vessel Traffic Management System along the Korea coastal waterway is inevitably introduced. But the establishing priority per area must be evaluated under the restricted budget. In this case, the estimated traffic flow has a major effect on priority evaluation. In the former paper , an algorithm was proposed for estimating the trip distribution between each pair of zones such as harbours and straits. This paper aims to formulate a simulation model for estimating the dynamic traffic flow per area in the Korea coastal waterway. The model consists of the algorithm constrined by the statistical movement of ships and the observed data, the regression analysis and the traffic network evaluations. The processed results of traffic flow except fishing vessel are summarized as follows ; 1) In 2000, the traffic congestions per area are estimated, in proportion of ship's number (tonnage), as Busan area 22.3%(44.5%), Yeosu area 19.8%(11.2%), Wando-Jeju area18.1%(6.8%), Mokpo area 14.9%(9.9%), Gunsan area 9.1%(9.3%), Inchon area 8.1%(7.7%), Pohang area 5.5%(8.5%), and Donghae area 2.2%(2.1%). 2) For example in Busan area, the increment of traffic volume per annum is estimated 4, 102 ships (23 million tons) and the traffic flow in 2000 is evaluated 158, 793 ships (687 million tons). 3) consequently, the increment of traffic volume in Busan area is found the largest and followed by Yeosu, Wando-Jeju area. Also, the traffic flow per area in 2000 has the same order.

  • PDF

Frame Rate Up-Conversion Using Triple Frame-based Bidirectional Motion Estimation (삼중 프레임 기반의 양방향 움직임 추정을 사용한 프레임율 증가 변환 방법)

  • Kang, Suk-Ju;Kim, Young-Hwan
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.47 no.4
    • /
    • pp.1-8
    • /
    • 2010
  • This paper proposes a new frame rate up-conversion method. First, the proposed triple frame-based bidirectional motion estimation method reduce block artifacts in the interpolated frame by solving the wrong motion estimation in the area with similar characteristics. Second, the proposed motion vector smoothing reduces outliers, which result in block artifacts, considering the spatio-temporal neighboring motion vectors. In the experiments, the proposed frame rate up-conversion method improves the average PSNR and SSIM by up to 4.337 dB and 0.089, respectively, compared to the existing methods.