• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.3
• /
• pp.1-13
• /
• 2006

The aim of the study is to assess groundwater pollution hazard of Pohang city using the DRASTIC system developed by the US Environmental Protection Agency (USEPA). Hydrogeological spatial databases of the system include information on depth to groundwater, net recharge, aquifer media, soil media, topographic slope, hydraulic conductivity, lineament and potential pollution source. With GIS based on these hydrogeological databases and the DRASTIC system, the regional groundwater vulnerability of the study area was assessed. Then the vulnerability was overlaid with potential pollution source and the regional groundwater pollution hazard was assessed by administrative district. From the results of the study, areas where need the counter plan for groundwater pollution and where should be managed for the groundwater pollution, are identified.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.22.2-22.2
• /
• 2009

Currently, metal silicides become increasingly more essential part as a contact material in complimentary metal-oxide-semiconductor (CMOS). Among various silicides, NiSi has several advantages such as low resistivity against narrow line width and low Si consumption. Generally, metal silicides are formed through physical vapor deposition (PVD) of metal film, followed by annealing. Nanoscale devices require formation of contact in the inside of deep contact holes, especially for memory device. However, PVD may suffer from poor conformality in deep contact holes. Therefore, Atomic layer deposition (ALD) can be a promising method since it can produce thin films with excellent conformality and atomic scale thickness controllability through the self-saturated surface reaction. In this study, Ni thin films were deposited by thermal ALD using bis(dimethylamino-2-methyl-2-butoxo)nickel [Ni(dmamb)2] as a precursor and NH3 gas as a reactant. The Ni ALD produced pure metallic Ni films with low resistivity of 25 $\mu{\Omega}cm$. In addition, it showed the excellent conformality in nanoscale contact holes as well as on Si nanowires. Meanwhile, the Ni ALD was applied to area-selective ALD using octadecyltrichlorosilane (OTS) self-assembled monolayer as a blocking layer. Due to the differences of the nucleation on OTS modified surfaces toward ALD reaction, ALD Ni films were selectively deposited on un-coated OTS region, producing 3 ${\mu}m$-width Ni line patterns without expensive patterning process.

• Environmental Analysis Health and Toxicology
• /
• v.27
• /
• pp.12.1-12.8
• /
• 2012

Objectives: The aim of this study was to identify the health and environmental risk factors of air contaminants that influence environmental and respiratory diseases in Gyeongju, Pohang and Ulsan in South Korea, with a focus on volatile organic compounds (VOCs). Methods: Samples were collected by instantaneous negative pressure by opening the injection valve in the canister at a fixed height of 1 to 1.5 m. The sample that was condensed in $-150^{\circ}C$ was heated to $180^{\circ}C$ in sample pre-concentration trap using a 6-port switching valve and it was injected to a gas chromatography column. The injection quantity of samples was precisely controlled using an electronic flow controller equipped in the gas chromatography-mass spectrometer. Results: The quantity of the VOC emissions in the industrial area was 1.5 to 2 times higher than that in the non-industrial area. With regards to the aromatic hydrocarbons, toluene was detected at the highest level of 22.01 ppb in Ulsan, and chloroform was the halogenated hydrocarbons with the highest level of 10.19 ppb in Pohang. The emission of toluene was shown to be very important, as it accounted for more than 30% of the total aromatic hydrocarbon concentration. Conclusions: It was considered that benzene in terms of the cancer-causing grade standard, toluene in terms of the emission quantity, and chloroform and styrene in terms of their grades and emission quantities should be selected for priority measurement substances.

• Korean Journal of Ecology and Environment
• /
• v.52 no.3
• /
• pp.245-265
• /
• 2019

Biotope, which represents the characteristic habitats of living organisms, need to be identified as essential for the efficient creation and sustainable management of urban ecosystems. This study was carried out to provide the basic information for ecological urban planning by analyzing types and attributes of the biotop established throughout the whole area of the Pohang city, a representative industrial city in Korea. The biotop established in Pohang city is composed of 12 types including forests (coniferous, deciduous, and mixed forests), agricultural fields (rice paddy and upland field), green facilities, river, reservoir, bare ground, residential area, public facilities, commercial area, industrial area, roads, and schools. As a result of analyzing the properties according to biotop types, industrial, commercial and residential areas, which represent urban areas, was dominated by introduced vegetation. Moreover the introduced vegetation is usually composed of exotic plants or modified forms for landscape architecture and horticulture rather than native plants, which reflects ecological property of both region and site. As the distance from the urban center increases, the agricultural field showed a form of typical farmland, whereas the closer it is, the more form of greenhouse farming. Natural green spaces were divided into riparian vegetation established along the stream and forest vegetation. Forest vegetation is consisted of secondary forests (seven communities) and plantations (three communities). The urban landscape of Pohang city is dominated by the industrial area. Among them, the steel industry, which occurs large amounts of heat pollution and carbon dioxide, occupies a large proportion. On the other hand, green space is very insufficient in quantity and inferior in quality. This study proposed several restoration plans and further, a green network, which ties the existing green spaces and the green space to be restored as a strategy to improve the environmental quality in this area.

• Journal of Korea Multimedia Society
• /
• v.20 no.3
• /
• pp.456-464
• /
• 2017

The epigraphy is a text on metal or a text on stone. The value of epigraphy can be used to identify historical facts of the past. It is a good record to understand the past life and culture. But it is difficult to decode the character of the epigraphy which has been exposed to the outdoor for a long time. In this study, the proposed techniques are consisted of 3 parts: (1)The surface division into information area, non- information area, and undifferentiated area. And then, (2) The selection of points in the non-information area and finding a reference plane with the minimum error. (3) Flattening the points perpendicular to the reference plane and decoding characters on information area. This research contributes to narrow the scope of a particular letter and to read the controversial letters on the Pohang Jungsoengri Silla Stone Monument(Korea's national treasure number 318).

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.1
• /
• pp.108-117
• /
• 2011

The purpose of this study was to analyze the association between educational environment (physical environment of cooking institutes and curriculum) and satisfaction with learning of students at local cooking institutes. Self-administered questionnaires were distributed to 300 student enrolled at cooking institutes located in Pohang and Gyeongju, and a total of 265 were usable. Collected data were statistically analyzed using SPSS 12.0 by frequency, factor, reliability, t-test and Duncan's multiple range test. The results can be summarized as follows. Most of the subjects were enrolled at cooking institutes to learn Korean and Western cuisine. There were significant differences in learning according to institution, facility, method and instructor. There were also significant differences in learning according to gender, age, education, and attended classes. Based on the results, the physical environment of cooking institutes contributed to learning in the students, but the operation system also needs to be improved. However, study was limited in sample size and area, the results can-not be generalized.

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.161-168
• /
• 2010

Purpose: Surgical approaches to the condylar neck and subcondyle area can cause some morbidity such as, facial nerve injury, time-consuming nature and external scar etc. So many surgeons hesitate using open reduction and internal fixation for the treatment of subcondylar fractures. We report open reduction and internal fixation of subcondylar fractures in 13 adult patients via transmasseteric approach. Methods: From 2007 to 2009, 13 adults with subcondylar fracture of mandible were treated with open reduction and internal fixation via transmasseteric approach. A preauricular incision was extended downwards in a curvilinear fashion in the cervicomastoid skin crease. Skin flap was elevated above the SMAS layer. Masseter muscle was splitted at the anteroinferior edge of the parotid gland. After the fracture was reduced, fixed with appropriate plates and screws. All operation were performed under general anesthesia. Results: Mean follow-up period was 13.3 months. There were no signs and symptoms of facial nerve injury, difficulty in mouth opening, or malocclusion. Dissection time was roughly within 30 minutes. Conclusion: Transmasseteric open reduction and internal fixation of mandible subcondylar fracture can be performed with excellent visualization, and inconspicuous scar. It also offers swift access to the subcondylar area while substatially reducing the risk to the facial nerve and eliminating the complications associated with transparotid approaches.

• Economic and Environmental Geology
• /
• v.23 no.1
• /
• pp.59-71
• /
• 1990

Magnetic anisotropy of a total of 213 independently oriented Tertiary rock samples from Pohang-Ulsan area has been studied. The sampled strata comprise basalts, tuffs and black shale, and range in age from Eocene to Miocene. The previous palaeomagnetic studies indicate that their magnetic carrier minerals are titanomagnetites. Among 23 sampled sites, 11 sites were found to preserve magnetic load foliation parallel to the bedding plane caused by the Iithostatic load of the overlying strata. Other 4 sites showed magnetic lineation indicating the flow direction of lava and tuffs. The remaining 8 sites revealed the magnetic tectonic foliation nearly vertical to the bedding plane. This magnetic foliation is interpreted to be generated by tectonic compression which acted nearly horizontally during the solidification stage of the strata. The compression directions deduced from the tectonic foliation of the 8 sites can be grouped into internally very consistent two group: a N-S trending one and the other WNW-ESE trending one. It is interpreted that the former N-S compression was associated with the N-S spreading of the East Sea(Sea of Japan) and the dextral strike-slip movement of the Yangsan-Ulsan fault system. The latter WNW-ESE compression is interpreted to represent the folding and reverse faulting activity in the Korean and Tsushima straits during middle/late Miocene times.

• Journal of the Korean earth science society
• /
• v.24 no.5
• /
• pp.449-455
• /
• 2003

Climatic elements were investigated in order to understand the atmospheric environment around the Pohang area and for use as basic information in prediction. In this analysis, we could find that the annual mean temperature, relative humidity, and precipitation are 14.39$^{\circ}C$, 63.3%, and 1.178mm, respectively. The prevailing wind direction was southwestern, and the mean wind speed is 2.7m/s. The amount of cloud was abundant during the summer because of the Jang-ma phenomenon and convective clouds induced by terrain effect. The annual mean duration of sunshine represented about 2,221 hours.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.9
• /
• pp.1736-1745
• /
• 2002

The objective of this study is to predict the roll wear in hot rod rolling process. In this study hot rod rolling process for round and oval passes has been investigated. In order to predict the roll wear, the wear model is reformulated as an incremental form and then wear depth of roll is calculated at each deformation step on contact area using the results of finite element analysis, such as relative sliding velocity and normal pressure at contact area. Archard's wear model was applied to predict the roll wear. To know the thermal softening of DCI (Ductile Cast Iron) roll according to operating conditions, high temperature micro hardness test is executed and a new wear model has been proposed by considering the thermal softening of DCI roll expressed in terms of the main tempering parameter curve. 3D wear program developed in this study might be used for adjusting the gap of rolls to set up a suitable rolling schedule for keeping dimensional tolerance of the product.