• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.600-606
• /
• 2016

Wood-based composite panels such as plywood, particleboard (PB), or medium density fiberboard (MDF) are mostly used in the lamination on their surface for the manufacturing of furniture, or interior building products, the concern on the formaldehyde emission (FE) from the surface laminated wood panels is increasingly attracting attentions from the public. Thus, this study was conducted to understand influence of surface laminating materials to the FE from PB and MDF with or without edge sealing, using 24-hour desiccator method. Both PB samples that had been laminated on their surface with low-pressure laminate (LPL) or polypropylene (PP) film and MDF that had been treated with poly(vinyl chloride) (PVC) or coating were tested for the FE with or without edge sealing. As expected, the FE of PB with the sealed edges decreased to 37.4% and 80.7% with the LPL and PP lamination, respectively. The surface laminated MDF with the sealed edges also showed a decrease in the emission up to 57.8% and 54.3%, with the PVC lamination and coating, respectively. However, the coated MDF samples showed 5.3% increase in the emission when their edges were not sealed, indicating a FE form the solvent used for coating. These results showed that the type of surface lamination materials on wood-based composite panels has a great impact on their resultant FE, indicating that the influence of surface laminating materials should be taken into consideration for the formaldehyde mission measurement.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.414-420
• /
• 2013

Research on decreasing the weight of composite sandwich panels is in progress. This paper reports the experimental results for the mechanical behavior of a composite sandwich panel. The skins of sandwich panels were made of glass fiber sheets and plywood matrix composites. Their interior layers consisted of glass fiber pultrusion pipes and gold foam. Experimental tests were performed to obtain the mechanical properties and complex mechanical behavior. Before fatigue tests, tensile tests and 3-point bending tests were carried out to obtain the optimal design and determine their strength and failure mechanisms in the flat-wise position. After the static test, a fatigue test were conducted at a load frequency of 5 Hz, stress ratio (R) of 0.1, and endurance limit for the S-N curve. It showed that the failure modes were related to both the core design and skin failure.

• Journal of the Korea Furniture Society
• /
• v.14 no.2
• /
• pp.31-38
• /
• 2003

This study was carried out to investigate characteristics of wood-based panels and wood-cement board for the possible uses as flooring and wall materials. The optimum cement/wood ratio(C/W ratio) of wood~cement board manufactured by clamp-pressing was from 2.7 to 3.2. The dimesional stability was superior in the C/W ratio of 3.2. Particularly, the dimensional stability of cement board using fine particle for particleboard face layer was favorable through three levels of C/W ratio. According to types of wooden material, bending strength of cement board using coarse particle for particleboard core layer or old newspaper(ONP) fiber was relatively higher than others. Thermal conductivities of wood-cement boards were no lower than that of gypsum board, and higher than those of plywood and boards. In case of wood-cement board of the C/W ratio of 2.7, the fire-proof performances of cement composite boards were greater than that of gypsum board, and weight loss reached to about a half of gypsum board. Then, wood-cement boards showed superior fire-proof performance compared to wood-based panels.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.3
• /
• pp.39-54
• /
• 1992

Hollow core wood flush doors for wardrobes, and other general openings and bathroom were designed and fabricated to investigate the factors causing the bowing of them and to find out the countermeasure for the phenomena. Balance in grain orientation, thickness, specific gravity and M.C.(%) of face panel and symmetrical construction were the essential factors to prevent the deflection of flush doors just after manufacturing. Under one-sided severe service condition, the unbalance of M.C. between opposite face panels is inevitable. So the material as thick plywood with high stiffness is considered as an alternative for the stile. UF resin mixing into PVAc emulsion is preferred for bathroom.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.165-171
• /
• 2002

This study was to investigate the adhesion properties of fancy veneer and base panels and formaldehyde emission of wood-based floorings bonded with urea-melamine formaldehyde adhesives. We focused on stoichiometric mole ratio of reactive functional groups. The urea-melamine formaldehyde adhesives were made at twelve different formaldehyde/urea-melamine mole ratios. The interlaminated shear strength and formaldehyde emission of wood-based floorings bonded with selected adhesive among these adhesives were examined. The results showed that the bonding properties were high and the formaldehyde emission was low as the adhesive consisted of stoichiometric mole ratio of formaldehyde/urea-melamine. Interlaminated shear strengths of HDF(High Density Fiberboard) flooring were over 14 kgf/cm² at all mole ratios. At the mole ratio of 1.0, HDF flooring showed low value of formaldehyde emission of 953 mg/L. Interlaminated shear strengths of Plywood flooring were high, 14.02 kgf/cm² at mole ratio of 1.4. At the mole ratio of 1.0, Plywood flooring showed low value of formaldehyde emission of 0.26 mg/L.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.417-425
• /
• 2009

This study analyzed core issues addressed in the tentative agreement of WTO ministerial meetings held to finish WTO/DDA negotiations in Geneva in July 2008. The objectives of this study are to analyze changes in tariff reduction on timber products, and their influence on demand and supply of the items according to the modality of Non-Agricultural Market Access (NAMA) and to provide basic information for strategy formulation of our country for further WTO/DDA negotiations. The results indicate that there will not be significant changes in the tariff on sawnwood and on veneer sheets, however, the tariff on plywood need to be cut by around 50% from the applicable tariff rates of 2008 on condition that our country is in the position of developed countries. Therefore, the item of plywood is expected to be influenced greatly according to the change in tariff reduction. From the analysis of influence of tariff reduction on the demand and supply of timber products including sawnwood and wood based panels, such as plywood, particleboard, and fiberboard, the import quantities of the items are expected to be changed from 0.8% to 13.3% if our country is in the position of developed countries, however, they are expected to decline by 0.8%~44.3%, if our country is in the position of developing countries (22, coefficient for developing members).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.71-72
• /
• 2022

In the case of free-form buildings, it is difficult to reuse the form for panel production because the shape and size of the interior and exterior panels of the building are different. In general, it is a free-form concrete panel (FCP) production technology using the existing plywood formwork, and the form is produced in a different shape each time and is discarded after only one use. The production of these disposable forms requires enormous resources, including materials, labor and time. Hence, it is necessary to develop innovative forms that can be reused for sustainable FCP construction. In this study, a technology has been developed that combines 3D Plastering Technique (3DPT) to produce FCP. By applying this technology to free-form building projects, the time and cost required for FCP production can be reduced. However, specific studies on the production process for this technology have not been done yet. Therefore, the objective of this study is a basic study of free-form concrete panel production process using 3D plastering technique.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.99-116
• /
• 1999

Wooden hollow core flush door is one of the main products of furniture manufacturing and woodworking industries. Warping and buckling of the door is serious problems in service. It has been reported that warping is caused by differences of physical and mechanical properties of face and back of skin panel for the door. This study focused on the prediction of warping and buckling phenomena of the flush door using numerical models. Predictions from the models were also compared with the experimental results obtained from the doors with plywood and hardboard skin panels under various environmental conditions. Three elastic constitutive models, so called elastic beam model, plate model and plate-buckling model, were employed to predict warping and buckling of the doors. It was observed that warping was more pronounced in low humidity condition than in high humidity condition. The plate model considering Poisson's effect was reliable to predict warping more closely than elastic beam model in low humidity condition. The plate-buckling model, however, was the best in the fitting of predictions with the experimental results under high humidity condition because buckling was developed in face and back of skin panel at that condition.

• Journal of Korean Society of Forest Science
• /
• v.97 no.4
• /
• pp.408-416
• /
• 2008

This study was analyzed the changes of the tariff reduction for the timber products according to the modalities proposed by the chairman of Non-agriculture Market Access. The resulted data would be expected to be used for establishing the strategies for the WTO/DDA negotiation of Korea. As WTO/DDA negotiation was officially resumed in the early 2007. It was necessarily required to develop a strategy how to address debating core issues raised during the negotiation since 2006. For this purpose, major core issues and agenda were arranged and analyzed in this study. In Korea, the results of the analysis show that, in the position of developed members, the applicable tariff rates after the tariff reduction of sawnwood and veneer sheet was not different from that in 2007. However, in the position of developing members, the applicable tariff rate of sawnwood and veneer sheet was increased after the tariff reduction. The unbound tariff lines, wood-based panels such as plywood and medium-density fiberboard, the applicable tariff rate after the tariff reduction was analyzed to be reduced more than 50% in the position of developed members, and therefore is determined to be considerable influenced upon the applicable tariff rates. On the other hand, in the position of developing country the tariff rates after the tariff reduction was higher than that of the applicable tariff rates in 2007. Thus no changes of the tariff reduction by a negotiation agreement was analyzed to be happened.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.261-267
• /
• 2007

The 20 L small chamber test method is to evaluate pollutants such as TVOC, formaldehyde emitted from building materials. This method was only designed to evaluate the surface emission of sample exposed in the chamber. In this method, building materials cut with a fixed standard size are fixed in a sample sealing box. The sample sealing box is put into the 20 L test chamber. This chamber is ventilated at a standard air change rate with purified air for 7 days then the sample from the chamber is collected and analyzed to measure the emission rate of TVOC and formaldehyde. In this method, however, if the sealing box does not guarantee airtightness, accurate evaluation for the building materials can not be achieved due to the pollutants emitted from edge of the sample so called, edge effect. This edge effect can be much greater when evaluating panels such as plywood, flooring due to their surface treatment. In this study, flooring was tested to check airtightness of the sample sealing box with analytic results between 1L and 20 L test chamber. Furniture materials like LPM coated one side surface treatment and MDF coated both sides surface treatment with LPM were tested to identify whether the improvement of the sample sealing box airtightness is possible with the comparison between existing and improved test method that low VOC emission tape was used to seal the sample edge. After 7 days, MDF TVOC emission rate was different according to the existence and nonexistence of tape. The emission rate of the existing test method was $0.009mg/m^2h$ and that of improved test method was $0.003mg/m^2h$. Relative standard deviation for the existing test method was $0.004mg/m^2h$ and relative standard deviation for the improved test method was $0.002mg/m^2h$ when the same sample was analyzed three times. The improved test method in this study using low VOC emission tape was effective and able to reduce the heterogeneous effect of the edge from the sample sealing box.