• 제목/요약/키워드: Plus logistics

검색결과 12건 처리시간 0.017초

고장요인들에 대한 $217Plus^{TM}$ 시스템 모형의 민감도 (Sensitivity of the $217Plus^{TM}$ System Model to Failure Causes)

  • 전태보
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제11권4호
    • /
    • pp.387-398
    • /
    • 2011
  • $217Plus^{TM}$, a newly developed as a surrogate of the MIL-HDBK-217, may be widely applied for reliability predictions of electronic systems. In this study, we performed sensitivity study of the $217Plus^{TM}$ system model to various parameters. Specific attention was put to logistics model and its behavior has been examined in terms of non-component failure causes. We first briefly explained the $217Plus^{TM}$ methodology with system level failure rate evaluation. We then applied experimental designs with several failure causes as factors. We used an orthogonal array with three levels of each parameter. Our results indicate that cannot duplicate, induced, and wear-out causes have dominant effects on the system failures and design, parts, and system management have much less but a little strong effects. The results in this study not only figure out the behavior of the predicted failure rate as functions of failure causes but provide meaningful guidelines for practical applications.

$217Plus^{TM}$ 시스템 모형의 민감도

  • 전태보
    • 한국신뢰성학회:학술대회논문집
    • /
    • 한국신뢰성학회 2011년도 춘계학술발표대회 논문집
    • /
    • pp.257-264
    • /
    • 2011
  • In this study, we performed sensitivity study of the $217Plus^{TM}$ system model to various parameters. Specific attention was put to logistics model and its behavior has been examined in terms of non-component failure causes. We first briefly explained the $217Plus^{TM}$ methodology with system level failure rate evaluation. We then applied experimental designs with several failure causes as factors. We used an orthogonal array with three levels of each parameter. Our results indicate that cannot duplicate, induced, and wear-out causes have dominant effects on the system failures and design, parts, and system management have much less but a little strong effects. The results in this study not only figure out the behavior of the predicted failure rate as functions of failure causes but provide meaningful guidelines for practical applications.

  • PDF

SCM에 MFCA를 적용하기 위한 개념 연구 (A Study on Concept Development of MFCA Application for SCM)

  • 장정환;장청윤;장승연;조용철;이현근;이창호
    • 대한안전경영과학회지
    • /
    • 제15권4호
    • /
    • pp.253-260
    • /
    • 2013
  • The importance of environmental protection has been increased recently. Thus the environmental management was settled in an important global competition factor. In the meantime logistics cost occupied the 8.03% of sales at 2011. This portion was greater than the portion of other countries and it was needed the reduction of logistics cost to secure the competition power. As thus in this paper we prepared the process which diminish the environmental discharge and decrease the logistics cost. We proposed the process to apply the MFCA to SCM, until now the MFCA had been used generally in manufacturing process. We defined the loss in SCM and the plus logistic, minus logistic, logistic center and the classification of cost to adopt the MFCA to SCM.

물류관리에 있어 동적계획법을 이용한 수송시스템 설계 (Design of Transportation System Using Dynamic Programming in Logistic Management)

  • 하정진;이병호
    • 산업경영시스템학회지
    • /
    • 제18권34호
    • /
    • pp.129-137
    • /
    • 1995
  • Recently the recognition of Logistics becomes important to enterprises as a means for improving their competition, but the Korea enterpries falls for far behind in management techniques for analyzing realities and problems in the logistic compare to the advanced countries. In describing a distribution network, we have stated that it is basically a system or a set of locations that ship, receive or store material plus the routes that connect these locations. Using a Dynamic Programming on logistics, we can decrease the inventory level and increase the service level on logistics and the management performance.

  • PDF

국제해상운송업의 물류경쟁력 영향요인 (The Effects of Logistics Competence in Korea Overseas Shipping Industry)

  • 박영근;공덕암
    • 한국항만경제학회지
    • /
    • 제21권1호
    • /
    • pp.45-58
    • /
    • 2005
  • The purpose of this study is to consider the problem on pursuit of logistics strategy by our international shipping company in international shipping business under the said circumstance due to the open international shipping market and to suggest the logistics strategy for the consideration of the logistics competition under new international shipping circumstances. The results of empirical analysis are mentioned as follows; First, it shall be considered to maintain the size of company bigger than a certain capability so that it may obtain the superior competition of logistics. Second, as there are the plus correlations between the competition of logistics and the logistic support, it is necessary to pursuit the upgrade service with using EDI system and making up the complex shipping and integrated logistics system in general. Third, with the rationalization of finance policy and the profitable management of shipping company the ratio of net worth can be raised and it can be achieved to make the sound financial structure as reducing the excessive debt ratio. Fourth, it can be effort continuously to perform the investment for the infrastructure of logistics support & the institutional supplement so that it may achieve to increase the efficiency of logistic support at pier and to reduce the cost of logistic support.

  • PDF

물류산업에서의 클라우드 컴퓨팅 활용 방안 (Deployment of Cloud Computing in Logistics Industry)

  • 정재운;김현수
    • 디지털융복합연구
    • /
    • 제12권2호
    • /
    • pp.163-171
    • /
    • 2014
  • 클라우드 컴퓨팅(클라우드)은 물류정보시스템이 갖는 취약점(표준화할 수 없는 복잡 다양한 방식, 지리적 산재 및 매끄럽지 못한 연계성 등)의 보완 및 물류의 혁신적 활동을 지원할 수 있는 안성맞춤의 기술로 여겨진다. 이러한 의미에서 본 연구는 물류산업에 특화된 클라우드 활용 방안을 연구하고자 하였다. 이를 위해 물류분야의 클라우드 관련 최신 동향 분석, 물류산업에서 필요로 하는 클라우드와 플랫폼, 도입 방안에 대한 분석을 진행하였다. 본 연구는 후속연구에서 물류분야에 특화된 클라우드의 개발 방향을 설정하고, 보다 구체화된 클라우드를 개발하는 데 시사점을 제공한다.

DEA를 이용한 종합물류인증기업의 효율성 분석 : 물류창고업종을 중심으로 (Efficiency Analysis for Certified Integrated Logistics Warehousing firms Using DEA)

  • 강다연;이기세
    • 한국항해항만학회지
    • /
    • 제43권4호
    • /
    • pp.256-263
    • /
    • 2019
  • 정부는 국가 차원에서 물류인프라의 확충과 물류전문기업의 육성을 통해 물류기업의 경쟁력 향상과 국제물류시장의 주도권을 확보하기 위해 지속적인 노력을 실시해오고 있으며, 특히 동북아 지역의 경제규모 및 교역량이 자치하는 비중이 급증함에 따라 동북아 지역의 물류 네트워크 선정을 위해 다양한 정책을 추진하고 있다. 이러한 정부의 정책의 일환으로 2006년부터 종합물류기업 인증제도를 도입하여 시행하고 있다. 이 제도는 물류정책기본법에 근거하여 설립된 정부의 물류전문기업 육성방안의 대표적인 정책 중 하나이다. 그러나 이 제도로 인해 물류기업에 대한 신뢰성을 높여 물류산업의 선진화 및 효율화에 기여하였다는 주장과 동 제도로 인해 기업의 부담과 대기업 위주의 시장 통폐합 우려 등의 부정적인 의견이 대립되고 있다. 이에 본 연구는 이러한 논란이 있는 현 시점에서 종합물류인증 기업 중 물류창고기업을 대상으로 효율성 분석을 통해 비효율의 실태와 개선방안을 제시하고자 한다. 분석방법으로는 DEA 분석을 통해 종합물류인증기업의 경영효율성을 분석하며 비효율적인 기업의 투사값을 제시하며 벤치마킹의 대상이 될 수 있는 기업들의 참조집합을 제시하고자 하며 또한 분석결과를 통해 벤치마킹의 대상이 되는 기업들을 제시하였다.

항만물류조직구성원들의 보안능력에 영향을 미치는 요인 (Factors Affecting the Security Ability of Port Logistics Organization Members)

  • 강다연
    • 한국항해항만학회지
    • /
    • 제43권3호
    • /
    • pp.179-185
    • /
    • 2019
  • 현재 항만물류보안과 관련한 노력이 활발하게 일어나고 있지만 항만정보기술과 관련된 보안에 대해서는 인식과 교육, 제도 등이 부족한 상황이다. 상호인증 협약 수립을 통해 항만물류보안 정보를 실시간으로 교환 할 수 있는 통합 네트워크를 구축할 필요성이 있다. 항만경쟁력 확보 및 물류 서비스 강화를 목적으로 물류보안을 위한 국가 전략수립이 중요하다. 무엇보다 시급히 필요한 것은 항만물류조직구성원 들의 보안의식을 높이고 항만물류조직의 중요한 특성인 정보 보안 능력을 향상시키는 것이다. 따라서 본 연구는 항만물류조직구성원들의 정보보안능력에 영향을 미치는 요인을 분석하였다. 분석결과 보안규범이 보안인식에 영향을 미친다는 가설은 기각되었지만 보안활동과 보안인식 간의 관련성은 유의한 것으로 나타났다. 또한 보안규범과 보안능력 간의 관계, 보안인식과 보안능력 간의 관계에도 긍정적인 영향을 미치는 결과로 나타났다.

Low-Cost Flexible Strain Sensor Based on Thick CVD Graphene

  • Chen, Bailiang;Liu, Ying;Wang, Guishan;Cheng, Xianzhe;Liu, Guanjun;Qiu, Jing;Lv, Kehong
    • Nano
    • /
    • 제13권11호
    • /
    • pp.1850126.1-1850126.10
    • /
    • 2018
  • Flexible strain sensors, as the core member of the family of smart electronic devices, along with reasonable sensing range and sensitivity plus low cost, have rose a huge consumer market and also immense interests in fundamental studies and technological applications, especially in the field of biomimetic robots movement detection and human health condition monitoring. In this paper, we propose a new flexible strain sensor based on thick CVD graphene film and its low-cost fabrication strategy by using the commercial adhesive tape as flexible substrate. The tensile tests in a strain range of ~30% were implemented, and a gage factor of 30 was achieved under high strain condition. The optical microscopic observation with different strains showed the evolution of cracks in graphene film. Together with commonly used platelet overlap theory and percolation network theory for sensor resistance modeling, we established an overlap destructive resistance model to analyze the sensing mechanism of our devices, which fitted the experimental data very well. The finding of difference of fitting parameters in small and large strain ranges revealed the multiple stage feature of graphene crack evolution. The resistance fallback phenomenon due to the viscoelasticity of flexible substrate was analyzed. Our flexible strain sensor with low cost and simple fabrication process exhibits great potential for commercial applications.