• Journal of Bio-Environment Control
• /
• v.12 no.2
• /
• pp.101-105
• /
• 2003

This experiment was conducted to find out the effect of day length on the production of high quality plug seedlings in onion (Allium cepa L.). Two cultivars, ‘Changnyongdaego’ and‘Wolryun’, were grown to seedlings in 200-cell plug trays under 11.5, 12.5, 13.5 hours and natural day length. These seedlings were transplanted to the pot (16 cm In diameter) and grown under 16 hours day length. Number of leaves and neck diameter showed better growth in the longer than shorter day length treatments, but plant height old sheath length were retarded in the longer day length treatments. Growth such as no. of leaves, neck diameter, plant height and sheath length increased with the passage of day, but plant height and neck diameter decreased by treatment over 20 days with 13.5 hours day length. Bulbing and bulb size of onion after transplanting were enhanced in the seedlings cultured under longer day lengths. From the above results, treatment of long day length during seedling culture in plug tray can control the overgrowth and produce high quality plug seedlings.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2976-2983
• /
• 2013

Interest in reducing standby power is increasing because of electric power shortages. Most of electric equipment are in standby state that does not use a function of the original, most electronic devices consume a lot of electric power even in standby mode. In many countries, research on the smart plug is advanced in order to prevent power consumption due to standby state. However, due to the nature of the function, expensive in many case. These smart plugs would be to cut the standby power using motion detecting sensor or pattern control of the user. Theses features have no advantages because of malfunction of motion detecting sensor and in accordance with the diversification ot user's pattern. In this study, developing a multi-smart plug system that linked with bluetooth function of user's smart phone. Using smart phone bluetooth function, determination of the position of the user. The suggestion smart plug cutting the standby power of the electronic apparatus. It was confirmed that it is able to reduce the power consumption according to the location of the user.

• Journal of Hydrogen and New Energy
• /
• v.29 no.6
• /
• pp.661-667
• /
• 2018

Electric vehicles are taken a long time to charge and are restricted driving where charging infrastructure was not sufficiently constructed. The vehicle developed to solve these problems is a plug-in hybrid vehicle. It is possible to drive a certain distance by using electric motor and when the battery runs out, it operate the engine. Plug-in hybrid vehicle have a complicated structure and a lot of parts comparing a general vehicle because the electric parts and the internal combustion engine are installed together. Therefore, as the aging (mileage) of the plug-in hybrid vehicle, the influence which change of fuel consumption is expected to be larger than a general vehicle, but an experimental data are lacking. In this paper, we cumulate a mileage of the plug-in hybrid vehicle about 15,000 km and measured the fuel economy when the cumulated distance reached within 160 km, 6,500 km, 15,000 km respectively, by using domestic public test method. For measuring fuel economy of the vehicle, CD mode (driving distance on a single charge) which use only motor and the CS mode which operate motor and combustion engine were measured respectively. As a result, the fuel economy slightly increased at cumulated mileage of 6,500 km compared to the 160 km and the fuel economy of 15,000 km was similar to 160 km.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.678-686
• /
• 1997

This experiment was carried out to develop the mass propagation system for producing plug plantlets using stem cuttings of virus-tree microtubers in potato. Cocopeat, vermiculite, perlite and peatmoss were combined and used as plug nursery media to find out the best combination suitable for the growth of seedlings derived from microtubers. Seedling growth was favored in high temperature (above 2$0^{\circ}C$) and a long-day photoperiod(above 16 hours) condition, while stolons and microtubers formed in outdoor condition. Shoot and root multiplication was not affected by NAA 10mg /1 or IAA 10mg /1 treatment. At the early growth stage of plug plantlets, the number of leaves and roots and the length of root increased significantly when nodes from the upper (near to apex) part of shoots rather than from basal part were taken. But after transplanting, these differences among these characters were not observed. At ninety days after transplanting the plug plantlets in spring time, plant was around 70 to 80cm in height, and the number of stolons and tubers were ten and seven, respectively.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.205-216
• /
• 1994

The purpose of this study is to evaluate of apical plug materials for the contral of extrusion and sealing ability of high-temperature thermoplasticized gutta-percha in plastic root canal blocks. Seventy seven plastic blocks with canal preformed were instrumented with # 50K file 1 mm beyond apical foramen. Blocks were randomly divided into 5 groups of 15 blocks each. Group 1 was filled by high-temperature thermoplasticized gutta-percha only. The another 4 groups were placed with apical plug materials each other and then remaining space was back filled with high temperature thermoplasticized gutta-percha Apical plug materials were used as follows; Group 2: Thermoplasticized gutta-percha (Thermoplasticized gutta-percha group) Group 3 :. Calcium hydroxide powder (Calcium hydroxide group) Group 4 : Silver point (Silver point group) Group 5 : Gutta-percha cone softened by chloroform (Gutta-percha cone group) All the blocks were stored in 100 % relative humidor at room temperature for 14 days. Filling material extruded was removed carefully and then weighed in analytic balance. Each block was placed in centrifuge tube filled with India ink, and then centrifuged for 20 minutes at 3,000 rpm. Apical leakage was measured from the apical foramen to the most coronal level of dye leakage in millimeter by two examiners under a stereoscope. The data were analysed statistically by Student's t-test The obtained results were as follows; 1. The amounts of material extruded through the foramen decreased in all of groups used apical plug materials (P<0.01). 2. Silver point group and gutta-percha cone group were similar linear leakage to high-temperature thermoplasticised gutta-percha technique only (P>0..5). 3. Calcium hydroxide group and thermoplasticized gutta-percha group showed more liner leakage than high-temperature thermoplasticized gutta-percha only (P<0.01, P<0.05). 4. High-temperature thermoplasticized gutta-percha technique with silver point and gutta-percha cone as apical plugs showed less linear leakage and less extrusion of filling material.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.4
• /
• pp.32-40
• /
• 2005

The purpose of this study is to investigate variation of spark plug protrusion and PDA valve on the exhaust emission in a gasoline engine. Swirl is one of the important parameters that affects the characteristics of combustion. PDA valve has been developed to satisfy requirements of sufficient swirl generation for improving the combustion and reducing of emission level. Also, especially, the variation of spark plug protrusion have an important effect to the early flame propagative process. This is largely due to the high flame speed by short of flame propagation distance. So, this is forced that injection timing, spark timing and intake air motion govern the stable combustion. As a result, using two combustion chamber, without charge of engine specification and the variable spark plug location and PDA valve could be reduced exhaust gas at a part load engine conditions(1500rpm imep 3.9bar, 2000rpm imep 3.2bar, 2400rpm imep 3.9bar).

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.470-475
• /
• 2014

Recently, smart phones are spread out as a universal mobile terminal equipment. Its provide USB interface to connect with various devices. Smart phones may be replaced with high priced monitoring equipments because of portability and mobility as its merit. In addition to that, the various sensor devices detecting surrounding environment of the radioactivity, sodium or electromagnetic waves have been announced. But the plug and play methods of sensor devices have some problem to connect smart phone with USB accessory device. We propose an integrated methodology that can connect smart phone with USB sensor devices and also, we realized USB accessory plug and play with one App that can collect measurement data through various sensor devices.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.59-63
• /
• 2001

A high-impulse, low-power, continuous-shot microthruster has been developed using low boiling temperature liquid-propellant with high viscous fluid-plug. The viscous friction force of the fluid-plug increases the blast pressure and the low boiling temperature liquid-propellant is intended to reduce input power consumption. The three-layer microthruster has been fabricated by surface micromachining as well as bulk micromachining in the size of $7{\times}13{\times}1.5mm^{3}$. A continuous output impulse bit of $6.4{\times}10^{-8}N{\cdot}sec$ has been obtained from the fabricated microthruster using perfluoro normal hexane (FC72) propellant and oil plug, resulting in about ten times increase of the impulse bit using one hundredth electrical input energy compared to the conventional continuous microthruster.

• Korean Journal of Organic Agriculture
• /
• v.10 no.2
• /
• pp.111-120
• /
• 2002

This study was conducted to investigate the effect of foliar application of Chitosan and seedling types on increasing the production of fall-growing potatoes(Solanum tuberosum) at the height of 250m from the sea in Jeju Island. The experiment main-plots consisted of four Chitosan applications, and subplots had three seedling types as cutting plug seedlings, mine-tuber plug seedling planting plot and seed potatoes planting plot. The foliar application of Chitosan of 2000ppm was carried out 0, 1, 3, 5 times at intervals of ten days after ten days of transplanting. Plant height and top dry weight were significantly more vigorous as three to five application of Chitosan. In the small tubers(under 80g), the number of tubers and tuber yield were relatively increased in the seed potatoes planting plot and mine-tuber plug seedling plot, but the large tubers(over 80g) was higher in the cutting plug seedling planting plot. T-N content in leaves was increased as the number of application of Chitosan was increased. A similar tendency was shown in K, P Ca, Mg and Na. The growth and tuber yield in cutting plug seedlings, mine-tuber plug seedling planting plot and seed potatoes planting plot were effectively increased as three to five foliar applications of Chitosan was increased.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.229-234
• /
• 1998

우리나라는 현재 고유의 액체금속로 모델인 KALIMER(Korea Advanced Liquid Metal Reactor)의 개발을 통해 에너지 자원의 이용 효율 증대와 사용후 핵연료 및 초 장수명핵종 소멸처리 문제 등과 같은 에너지 안보와 환경 문제를 동시에 해결하려 하고 있다. 한편 KALIMER의 개바이 그 의미를 갖기 위해서는 고려중인 개념들이 기술적인 측면에서 기능성, 제작성, 안전성, 운용성, 독창성 등이 우수해야 할 뿐만 아니라 경제성이 확보되어야 한다. (중략)