• 한국군사과학기술학회지
• /
• 제22권4호
• /
• pp.441-451
• /
• 2019

When a store is launched, the umbilical plug should be separated from the launcher without any physical interference and fragments. In order to satisfy these conditions, an umbilical plug and an umbilical separating device were designed. The plug is separated from the receptacle of the store while moving along inclined planes by the store thrust and the spring force connected from the launcher to the plug. As a result of the prototype test, the hanger on the store collided with the plug. Several tests were conducted after some actions were taken to prevent the collision. However, not only the same phenomenon was repeated, but also fragmentation occurred. In this study, the non-colliding conditions were analyzed through rigid and flexible multi-body dynamics analysis.

• 농촌지도와개발
• /
• 제12권1호
• /
• pp.109-118
• /
• 2005

This study was carried out to identify the major characteristics of plug seedling farm's management. Thirty glasshouse farms were surveyed out of 42 farms that adopted plug seedling production technology in Korea. The major objectives of this survey were to determine the technical capability of the glasshouse farmers, and to analyze the significant differences in terms of production performance and management capabilities. The major results of the survey were as follows : 1) The production quantity of plug seedlings of the superior group was 43% higher than the inferior group. 2) The plug seedling loss rate of the superior roup was lower by 4% than the inferior group. 3) The income of superior group was 4.2 million Won per $1,000m^2$, while the income of the inferior group was only 0.45 million Won. 4) The cause of low production of grafted plug seedlings was primarily due to the lack of technical knowledge and skills. 5) The results indicated that the technical knowledge level and production skills of grafting plug seedling should be improved.

• Journal of Biosystems Engineering
• /
• 제21권4호
• /
• pp.429-435
• /
• 1996

A wind tunnel consisting of two air flow conditioners with polycarbonate pipes, a plant growth room, a suction fan and fan controller, and fluorescent lamps, was designed to investigate the interactions between the growth of plug seedlings under artificial light and their Physical environments. Light transmissivities in the plant growth room based on the photosynthetic photon flux density and photosynthetically active radiation was appeared to be 96.3% and 96.8%, respectively. Measurement showed a uniformity in the vertical profiles of air current speed at the middle and rear regions of plug trays in wind tunnel. This result indicated that the development of a wind tunnel based on the design criteria of the American Society of Mechanical Engineers was adequate. Air current speed inside the plug stand was significantly decreased due to the resistance by the leaves of plug seedlings and boundary layer developed over and below the plug stand. Driving force to facilitate the diffusion of gas inside the plug stand might be regarded as extremely low. Aerodynamic characteristics above the plug stand under artificial light were investigated. As the air current speed increased, zero plane displacement decreased but roughness length and frictional velocity increased. Zero plane displacement linearly increased with the average height of plug seedlings. The wind tunnel developed in this study would be useful to investigate the effects of air current speed on the microclimate over and inside the plug stand and to collect basic data for a large-scale plug production under artificial light in a semi-closed ecosystem.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.8-13
• /
• 2005

Interoperability has been the problem of CAD/CAM systems. Starting from 1980's, national and international organizations have addressed the issue through development and release of standards for the exchange of geometric and nongeometric design data. To CAD/CAM vendors, the task of interpreting and implementing these standards falls into their products. This task is a balancing action between users' needs, available development resources, and the technical specifications of standards. This paper explores an area of CAD/CAM systems development, particularly the implementation of the effective exchange files translators'. A new approach is introduced, which proposes to enclose all the translation operations concerning each exchange format to a separate DLL, thus making a 'plug-in.' Then, this plug-in could be used together with the CAD/CAM system or with specialized translation software. This approach allows to create new translators rapidly and to gain the reliable, high-efficiency, and reusable program code. The second part of the paper concerns the possible problems of translators' development. These difficulties often come from the exchange standards' misunderstanding or ambiguity in standards. All examples come from the authors' practice experiences of dealing with CAD/CAM systems.

• 생물환경조절학회지
• /
• 제27권4호
• /
• pp.381-390
• /
• 2018

본 실험은 기존의 플러그 육묘 시스템과 원통형 종이 포트 시스템을 상호비교하여 주요 과채류 육묘의 생육 특성을 검토 하기 위해 수행되었다. 초장, 엽면적, 경경, 생체중 등의 지상부 생육은 토마토, 오이, 수박 모두 원통형 종이포트와 플러그 트레이 간의 차이가 없었다. 총 근장은 토마토와 오이는 육묘초기, 수박은 전 기간동안 플러그 트레이가 원통형 종이포트에 비해 길었다. 뿌리의 직경별로 각 뿌리의 길이를 구분한 결과, 토마토는 시험구간 차이가 없었지만 오이와 수박은 모든 굵기의 뿌리에서 플러그가 종이포트에 비해 20~251% 길었다. 토마토 뿌리의 생체중은 육묘기는 플러그 트레이가 원통형 종이포트에 약 30% 무거웠지만 생육이 진전될수록 차이가 감소하였고, 정식 이후는 시험구간 차이가 없어졌다. 오이 뿌리의 생체중은 육묘기부터 정식 이후까지 플러그묘가 약 20~30% 무거웠고, 정식 이후 까지도 생육이 진전될수록 차이가 커지는 경향을 보였다. 수박은 육묘기부터 정식 7일후까지는 원통형 종이포트 묘의 지상부 생체중 및 건물중이 무거웠지만, 정식 7일 이후부터 역전되었다. 결론적으로 원통형 종이포트 묘와 플러그 트레이 묘의 지상부 생육은 전반적으로 차이가 없었고, 지하부 생육은 플러그묘의 생육량이 많았다.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.46-57
• /
• 1995

The aim of the present study is to provide fundamental informations for the development of magneticfluid actuator. To achieve the aim, oscillation characteristics of the magneticfluid plug are investigated by experiment for the various length and position of the magneticfluid plug and the frequency of magnetic field. The oscillation characteristics are obtained. Amplitude, natural frequency, phase shift and damping ratio, are compared with theoretical values. From the study, the following conclusive remarks can be made. The experimental equation for the magnetic field is obtained. The critical magneticfluid length exists and its value is about 70mm. The range of the damping ratio and fluid loss coefficient obtained by experiment are 0.1~0.2 and 30~100, respectively. Comparison between experimental and theoretical results of oscillation characteristics shows good agreement in the high frequency range. Meanwhile, in the low frequency range, there appears little discrepancies(5% in the frequency and amplitude and 10% in phase difference and damping ratio) with each other.

• 한국군사과학기술학회지
• /
• 제10권1호
• /
• pp.70-77
• /
• 2007

Simulation Based Acquisition(SBA) gains interest from the defense acquisition community. To accomplish SBA efficiently, M&S should be collaborately used in. This paper proposes PBA(PlugIn-Based Architecture) that is a common software development infrastructure and provides reuse mechanism with plugin components. PlugIns are reuse entity possible to plug-in-play statically and dynamically. This architecture supports stand alone simulation and HLA-compliant distributed simulation also.

• 한국철도학회논문집
• /
• 제5권2호
• /
• pp.112-117
• /
• 2002

Reduction of noise level in the cabin of urban transit unit is an important issue to enhance the comfortability of passengers. It is made clear that a cause of increased noise level in cabin is the imperfect airtightness of entrance doors. In this study, the sliding-plug door system is developed to reduce the noise level of cabins by securing the airtightness of entrance door. The sliding-plug door system is composed of air-driven engine, swing arms, guide rails, guide rollers and locking devices. It is economical owing to using the previous door engine system. It is also adequate for the platform system of our subway station. It was tested to prove the reliability of system and was applied to standard urban transit unit. The effectiveness of noise reduction in cabin resulting form the sliding-plug door system was confirmed by test results.

• Journal of Multimedia Information System
• /
• 제9권3호
• /
• pp.209-218
• /
• 2022

Industrial IoT applications, including smart factories, require two problem-solving to build data monitoring systems required by services from distributed IoT sensors (smart sensors). One is to overcome proprietary protocols, data formats, and hardware differences and to uniquely identify and connect IoT sensors, and the other is to overcome the problem of changing the server-side data storage structure and sensor data transmission format according to the addition or change of service or IoT sensors. The IEEE 1451.4 standard-based or IPMI specification-based smart sensor technology supports the development of plug-and-play sensors that solve the first problem. However, there is a lack of research that requires a second problem-solving, which requires support for the plug-in of IoT sensors into remote services. To propose a solution for the integration of these two problem-solving, we present a IoT sensor platform, a service system architecture, and a service plugin protocol for the MQTT-based IIoT application environment.

• 한국시뮬레이션학회논문지
• /
• 제18권4호
• /
• pp.81-94
• /
• 2009

임베디드 시스템 개발에 있어서 재사용성이나 가변성 설계에 대한 연구가 미흡한 상태이다. 임베디드 시스템의 특성 상 새로운 디바이스를 지원할 수 있도록 설계되어야 하는데, 확장성이 고려되지 않은 임베디드 시스템의 경우 재구축해야 하는 어려움이 있다. 현재 임베디드 시스템의 개발 생산성 및 재사용성이 매우 낮으며, 이런 흐름은 소프트웨어 위기와 같이 임베디드 시스템의 유지보수 비용 증가, 개발비 증가, 시스템의 품질 저하 문제에 직면하게 될 것이다. 본 논문에서는 이와 같은 임베디드 시스템의 문제를 극복하기 위한 기반을 제공하고자 임베디드 시스템의 재사용성 프레임워크를 제시한다. 이 프레임워크를 기반으로 다양한 디바이스를 동적으로 지원할 수 있는 플러그인 기법을 제안하며, 플러그인 기법의 기반이 되는 동적 메타모델를 제시한다.