• 한국유기농업학회지
• /
• 제8권1호
• /
• pp.89-99
• /
• 1999

To do mass multiplication of plug seedlings in potatoes, apical stem cuttings originated from virus-free microtubers were cut to one-two internodes and transplanted into the plug-tray. After 10days, we applied Chitosan and Wood Extraction on rooting and tuber formation of plug seedlings. To improve field adaptability of plug seedlings, rooted cuttings with a height of 20cm after 20days of cutting were transplanted ito the fields, We applied 500~2000ppm Chitosan on growth characteristics and tuber formation of that. The above and underground growths, such as plant height and number of leaves were significantly more vigorous after treatment with 500~1,000ppm Chitosan and 2,000ppm Wood Extraction, the spray treatment was carried out five times at intervals of four days after ten days of transplanting. T-N, K, P, Mg and Na, were higher as the concentrations of chitosan and Wood Extraction were higher. The growth and tuber yield in plug seedlings planting plot and seed potatoes planting plot were effectively highter as foliar application of Chitosan(500~2,000ppm) was done after planting the plot. T-N content in leaves and tuber was higher as the concentration of Chitosan was high. A similar tendency was shown in K, P and Mg. In the small tuber(under 30g), the number of tubers and tuber yield were relatively increased in the seed potatoes planting plot, but the large tubers(over 80g) yield was higher in the plug seedlings planting plot, and in order to increase tuber yield in plug seedlings it was necessary to add plant density to the field.

• Journal of Biosystems Engineering
• /
• 제21권4호
• /
• pp.429-435
• /
• 1996

A wind tunnel consisting of two air flow conditioners with polycarbonate pipes, a plant growth room, a suction fan and fan controller, and fluorescent lamps, was designed to investigate the interactions between the growth of plug seedlings under artificial light and their Physical environments. Light transmissivities in the plant growth room based on the photosynthetic photon flux density and photosynthetically active radiation was appeared to be 96.3% and 96.8%, respectively. Measurement showed a uniformity in the vertical profiles of air current speed at the middle and rear regions of plug trays in wind tunnel. This result indicated that the development of a wind tunnel based on the design criteria of the American Society of Mechanical Engineers was adequate. Air current speed inside the plug stand was significantly decreased due to the resistance by the leaves of plug seedlings and boundary layer developed over and below the plug stand. Driving force to facilitate the diffusion of gas inside the plug stand might be regarded as extremely low. Aerodynamic characteristics above the plug stand under artificial light were investigated. As the air current speed increased, zero plane displacement decreased but roughness length and frictional velocity increased. Zero plane displacement linearly increased with the average height of plug seedlings. The wind tunnel developed in this study would be useful to investigate the effects of air current speed on the microclimate over and inside the plug stand and to collect basic data for a large-scale plug production under artificial light in a semi-closed ecosystem.

• 한국작물학회지
• /
• 제46권2호
• /
• pp.121-124
• /
• 2001

Potato (Solanum tuberosum L.) tubers of 10, 20, 30, 40, and 50 g were planted in plug trays with vermiculite-based root medium on 10 August 2000 and grown for 15 days in a glasshouse to determine the effects of mini-tuber size on plug seedling growth and field performance of plug seedlings. For a control, common potato tubers weighing 50 g were also planted. As size of seed tubers planted increased from 10 to 50 g, seedling height decreased from 24.6 to 20.0cm while shoot number per seedling increased from 2.0 to 3.5, main stem diameter from 4.3 to 6.1mm, and fresh weight of root + top from 9.3 to 19.4 g/seedling. At 90 days after transplanting plug seedlings, the total number of tubers per plant increased from 3.62 to 4.72, average tuber weight from 62.9 to 72.8g, and total tuber yield 20.5 to 23.6 t/ha with increase in seed tuber size. Plug seedlings raised from 50g tubers produced 22% more tubers per plant and had 21 % higher＞80g tuber yield than the directly planted potatoes.

• 한국작물학회지
• /
• 제46권2호
• /
• pp.125-129
• /
• 2001

Eight vermiculite-based root media prepared with addition of complete fertilizer (2 g/L; N-$P_2$$O_5$-$K_2$O, 10-10-14) for potatoes (Solanum tuberosum L.) and a commercial root medium were evaluated in 2000 to develop the root media suitable for potato plug seedling production. The eight media consisted of various ratios of vermiculite, perlite, peatmoss, and compost. In addition, four rates (0, 1, 2, or 4 g/L) of the complex fertilizer for potato were added to a root medium (70% vermiculite, 10% perlite, 10% peat moss, and 10% compost by volume) to determine the optimum addition rate of the complex fertilizer for plug seedlings. Compost addition to the media increased plant height, the number of leaves per plant, and top and root fresh weight of 15-day old plug seedlings. The seedlings raised in root media containing compost produced significantly higher total tuber yield. Addition of the complex fertilizer to root media enhanced seedling growth and increased the number of tubers per plant and tuber yields. The results suggest that root media containing 50% vermiculite, 0 to 20% peat moss, 10% perlite, 20 to 40% compost, and 2 g/L complex fertilizer for potato appear suitable for potato plug seedling production.

• 생물환경조절학회지
• /
• 제12권2호
• /
• pp.101-105
• /
• 2003

양파 plug묘 육묘시 일장조절에 의한 우량묘 생산을 위해 자연일장을 대비로 하여 11.5시간, 12.5시간 및 13.5시간의 일장 하에서 월륜과 창녕대고 품종을 200공 plug tray에 육묘한 후에 직경 16cm pot에 이식하여 16시간의 일장 하에서 재배하였다. 엽수, 엽초경, 초장 및 엽초장은 시기가 경과할수록 증가하였으나 13.5시간 일장에서의 초장과 엽초경은 일장처리 20일 후에는 감소하였다. 일장에 따른 생육은 엽수 및 엽초경은 장일조건에서 생육이 좋았으나 초장 및 엽초장은 장일에서 억제되는 경향을 나타내었다. 장일조건에서 육묘한 것일수록 이식 후에 구가 크고 비대도 빨랐다. 이상의 결과로 볼 때 육묘기간 중의 장일처리로서 도장의 억제 및 우량묘 생산의 가능성을 보여주고 있다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1997년도 동계 학술대회 논문집
• /
• pp.392-400
• /
• 1997

This study was conducted to develope the machine vision system of a robotic transplanter for bedding plants. Specific objectives of this study were 1) to get coordinates of the healthy seedlings except empty cells and bad seedlings in high-density plug tray, and 2) to get the angle of the leaves of the healthy seedlings to avoid damage to the seedlings by gripper. The results of this study are summarized as follows. (1) The machine vision system of a robotic transplanter was developed. (2) The success rates of detecting empty cell and bad seedlings in 72-cell and 128-cell plug trays were 98.8% and 94.9% respectively. (3) The success rates of calculating the angle of leaves in 72-cell and 128-cell plug trays were 93.5% and 91.0% respectively.

• 한국작물학회지
• /
• 제44권3호
• /
• pp.201-206
• /
• 1999

For the mass production of plug seedlings in cultivar ‘Dejima’ potato (Solanum tuberosum L.) the optimal apical cutting diameter for rooting and rapid multiplication of stem cuttings in hydroponics were determined. In addition, the best planting date was predicted to increase tuber yield of plug seedlings at fall cropping in Cheju-Do, Korea. Days to initial rooting decreased as the cutting diameter was reduced. Plant height, leaf number, root length and root weight per plant were favorable as the cutting diameter was small. The ideal cutting diameter was 1-2 mm in this experiment. In the hydroponic cultures, the Japanese standard (JS) nutrient solution was the most effective for multiplication of stem cuttings. It was able to propagate more than 20 times a month from a single mother plant. Viability of plants, which were derived from plug seedlings using stem cuttings, was excellent when transplanted to the field. The number of tubers and tuber yield in both of the plug seedlings and seed potato planting plots were high when planted on 25 August. The number and yield were reduced when planted on 15 August, 5 September and 15 September. The degree of decrease of tuber yield in the plug seedling planting plot however, was lower than that of seed potatoes when the planting date was late. In the case of small tubers (under 30 g), the number of tubers and tuber yield were evidently increased in the seed potato tuber planting plot; the yield of large tuber (over 80g) in the plug seedling planting plot was higher than that of the seed potato. The total tuber yield per plant in the plug seedling planting plot was less than that of the seed potato; therefore, in order to increase tuber yield it was necessary to increase field plant density.

• 생물환경조절학회지
• /
• 제8권4호
• /
• pp.275-280
• /
• 1999

인공광하의 풍동 내에서 $CO_2$ 농도와 기류속도 제어가 플러그묘 개체군의 생육에 미치는 효과를 분석하고자 시도된 본 연구의 결과를 요약하면 다음과 같다. 인공광하에서 묘개체군의 줄기 길이 및 직경, 초장, 순광합성속도 등에 미치는 기류속도의 영향은 저농도의 $CO_2$ 조건보다는 고농도의 $CO_2$ 환경에서 분명하게 나타났다. 기류속도가 증가할수록 줄기 길이가 감소하였는 데, 이와 같은 결과는 $CO_2$ 농도가 높게 유지되는 조건에서 분명하게 나타났다. $CO_2$ 농도가 높은 조건에서 줄기 직경은 기류속도가 증가함에 따라 증가하는 것으로 나타났다. 묘개체군의 초장은 $CO_2$ 농도가 낮게 유지되는 조건에 비해서 $CO_2$ 농도가 높게 유지되는 경우에 작게 나타났다. 묘개체군의 순광합성속도는 0.7m.s$^{-1}$의 기류속도에서 최대치가 나타났으며, 이러한 결과는 $CO_2$ 농도가 높게 유지될 때 더욱 분명하게 나타났다. $CO_2$ 농도가 950$\mu$mol.mol$^{-1}$를 유지할 때 묘개체군의 순광합성속도는 310$\mu$mol.mol$^{-1}$인 경우에 비해서 약 46% 정도 높게 나타났다. 그러므로 인공광하에서 묘소질이 우수한 플러그묘의 육묘에 $CO_2$시용이 효과적일 것이다.

• 생물환경조절학회지
• /
• 제26권4호
• /
• pp.368-377
• /
• 2017

본 연구는 최근에 도입된 원통형 종이포트 묘에 대한 현장 활용가능성을 검토하고자 기존의 프러그 묘를 대조구로 하여 몇가지 육묘조건에 따른 묘의 생육 차이를 분석하고, 정식 후 수량을 비교하였다. 전주 유리온실에서 수행된 육묘 실험에서는 묘의 생육은 프러그 트레이 50공에서 지속 시비한 처리에서 생육량이 가장 많았다. 생육은 육묘 상자의 구멍에 채우는 상토량에 따라 영향을 받으며, 육묘 상자 보다는 시비 처리에 따른 차이가 더 컸다. 공시한 '청양', '대권선언', '롱그린맛' 품종 모두 같은 양상을 보였다. 육묘 후 비닐하우스와 노지에 심어서 뿌리 발달과 수량을 조사한 결과, 비닐하우스 재배 시 '청양' 품종의 뿌리 내림은 종이포트묘와 프러그묘 간에 차이가 없었으며, 공시한 3 품종 모두 최종 누적수량의 차이는 없었다. 전주 지역 노지재배에서는 '청양'은 종이포트묘가, '대권선언'과 '롱그린맛'은 프러그묘가 누적수량이 많았다. 영양 지역에서 '대권선언' 품종은 종이포트묘와 프러그묘 간에 수량 차이는 없었다. 결론적으로 육묘 처리 조건에 따른 원통형 종이포트 고추묘의 생육의 변화는 기존의 프러그묘와 같은 양상이며, 정식 후 재배조건과 품종에 따른 미미한 차이는 있었으나 전반적으로 수량차이는 없는 것으로 나타나 앞으로 원통형 종이포트 고추 묘에 대한 활용가능성은 높을 것으로 판단되었다.

• Journal of Biosystems Engineering
• /
• 제22권3호
• /
• pp.317-324
• /
• 1997

This study was conducted to develope a machine vision system for a robotic transplanter for bedding plants. Specific objectives of this study were 1) to get coordinates of the healthy seedlings in high-density plug tray, and 2) to get the angle of the leaves of the healthy seedlings to avoid the damage to seedlings by gripper. Results of this study were summarized as follows. (1) The machine vision system of a robotic transplanter was developed. (2) Success rates of detecting empty cell and bad seedlings for 72-cell and 128-cell plug-trays were 98.8% and 94, 9% respectively. (3) Success rates of calculating the angle of leaves fer 72-cell and 128-cell plug-trays were 93.5% and 91.0% respectively.