• 한국결정성장학회지
• /
• 제29권3호
• /
• pp.91-106
• /
• 2019

친환경 자동차용(EV: Electric Vehicle, HEV: Hybrid Electric Vehicle, PHEV: Plug-in Hybrid Electric Vehicle) 리튬계 이차전지의 폭발적인 증가로 인하여 리튬의 수요가 매우 가파르게 증가하고 있다. 전통적인 리튬의 생산은 주로 리튬 함유 광물이나 염호에서 이루어졌으나, 최근에는 리튬계 이차전지의 재활용 시 유가금속과 함께 회수되고 있다. 본 연구에서는 리튬이 함유된 물질로부터 리튬을 회수하는 방법에 대하여 종합적으로 고찰하고자 하였다.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.140-144
• /
• 2019

This paper proposes an approach for measuring voltage of high voltage(HV) battery of plug-in hybrid electric vehicle(PHEV) and battery electric vehicle(BEV). The proposed methods use isolation resistor and isolation amplifier in order to measure high voltage which should be electrically separated from measuring circuit. In terms of practical applications their advantages and disadvantage are discussed and key design points are addressed by simulations. More importantly, the proposed methods are applicable to various applications such as on-board charger, inverter and battery management system (BMS) which are directly connected to HV battery in PHEV and BEV.

• 전기학회논문지
• /
• 제60권3호
• /
• pp.566-571
• /
• 2011

As Plug-in Hybrid Vehicle and Electric Vehicle (PHEV/EV) take a greater share in the personal automobile market, their high penetration levels may bring potential challenges to electric utility especially at the distribution level. Thus, there is a need for the flexible charging management strategy to compromise the benefits of both PHEV/EV owners and power grid side. There are many different management methods that depend on the objective function and the constraints caused by the system. In this paper, the schema and dispatching schedule of centralized PHEV/EV charging spot network are analyzed. Also, we proposed and compared three power allocation strategies for centralized charging spot. The first strategy aims to maximize state of vehicles at plug-out time, the rest methods are equalized allocation and prioritized allocation based on vehicles SoC. The simulation results show that each run of the optimized algorithms can produce the satisfactory solutions to response properly the requirement from PHEV/EV customers.

• Journal of Welding and Joining
• /
• 제30권3호
• /
• pp.66-70
• /
• 2012

Welding is an essential process in the automotive industry. Most welding processes that are used for auto body is spot welding. And $CO_2$ arc welding is used in a small part. In production field, $CO_2$ arc welding process is decreased and spot welding process is increased due to welding quality is poor and defects are occurred in $CO_2$ arc welding process frequently. But $CO_2$ arc welding process should be used at robot interference parts and closed parts where spot welding couldn't. $CO_2$ welding is divided into lap welding and plug arc spot welding. In case of plug arc spot welding, burn through and under fill were caused in various welding environment such as different thickness combinations of base metal, teaching point, over the two steps welding and inconsistent voltage/current. It makes some problem like poor quality of welding area and decrease the productivity. In this study, we will evaluate the effect of teaching point through the weld pool behavior and bead geometry in the arc spot welding at the plut hole. Welding position is horizontal position. And galvanized steel sheet of 2.0mm thickness that has plug hole of 6mm diameter was used. Teaching point was changed by center, top, bottom, left and right of the plug hole. At each condition, the phenomenon of weld pool behavior was confirmed using a high-speed camera. As the result, we find the center of plug hole is the most optimal teaching point. In the other teaching point, under fill was occurred at the plug hole. This phenomenon is caused by gravity and surface tension. For performance of arc spot welding at the plug hole, the teaching condition should be controlled at a center of plug hole.

• 정보과학회지
• /
• 제29권9호
• /
• pp.19-26
• /
• 2011

• 대한기계학회논문집B
• /
• 제33권4호
• /
• pp.255-263
• /
• 2009

The most concerning issue of these days is the energy crisis caused by increasing threat of dependence on imported oil and volatile market trend. Under these circumstances, the PHEV(plug-in hybrid electric vehicle) is drawing attention for the next generation's car which could give a chance to decrease the dependence on imported oil and reduce the environmental impact of vehicle. The fueling cost of PHEV, one of the core factor of decision about buying car, should be calculated in the circumstances of Korea to make sure that PHEV has competitive power in real market. The fuel cost saving of PHEV versus CV(conventional vehicle) is simulated and discussed in the condition of increasing gasoline cost, electricity rate, and city-gas rate. In conclusion, the PHEV60-FS shows the best economic feasibility when gasoline price goes up. The PHEV20 has the most stable economic feasibility as electricity rate increases. The fuel cell cogeneration system for RPG could be an alternative for charger of PHEV in the near future.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.554-561
• /
• 1998

Vehicle body structures are formed by thousands of spot welds and fatigue failure of vehicle structures occur near the spot welds after driving a long way at a durability test road. It is necessary to know accurately the reason of the fatigue failure of the spot weld in the developing stage in order to reinforce it. Many investigations have been done regarding the strength of spot welded joints, contributing to understand its fatigue strength. In developing process, a fatigue failed spot welded area can be repaired by $CO_2$ welding or another method to continue the test. To know the effect of reinforcing these welds, several methods of welding were analyzed and compared to spot welding. With the results of this test, the appropriate repair method can be used instead of spot welding during the development of new car and best design guide can be given for the strength. In this study, fatigue and static tensile tests are made and microstructure is investigated for the purpose of estimating the strength of welded joints by using spot welded and $CO_2$ plug welded specimens. The tested specimens are of two types : Tensile-shear type(TS) and L-tension type(LT).

• 에너지공학
• /
• 제19권2호
• /
• pp.81-91
• /
• 2010

플러그인 하이브리드자동차의 개발이 활발하다. 배전망으로부터의 전력을 수송에 사용함으로써 온실효과가스 배출과 화석연료소비를 저감시킨다. 향후 2030년까지의 플러그인 하이브리드자동차용 축전장치로는 리튬이온 이차전지가 가장 현실적인 기술이다. 리튬이온 이차전지 기술의 현황을 리뷰하고 장차 실용화될 것으로 전망되는 양극소재의 특성을 비교한다.

• 한국정보통신학회논문지
• /
• 제18권11호
• /
• pp.2765-2770
• /
• 2014

주차나 후진 시에 도움을 주기 위한 후방 카메라는 after-market을 통하여 많이 보급되어 있으나 좌우 측방과 전방의 차량 경계를 확인할 수 없어 많은 불편함이 있다. 차량의 주변을 한 눈에 감시할 수 있는 차량 주변 감시 시스템은 자동차 벤더들에 의해 개발되어 장착되고 있으나 이에 대한 체계적인 연구는 부족한 실정이다. 일본 닛산 자동차의 인피니티 차량에 적용된 AVM이 차량의 사방을 확인하기에 적합한 제품이지만 아날로그 케이블을 사용하여 부가적인 케이블링 작업과 EMI/EMC에 대한 간섭에 따른 화질저하의 단점을 가진다. 본 논문에서 구현된 MOST150 네트워크 기반 차량 주변 감시 시스템은 광 네트워크 기반이므로 EMI/EMC 문제가 없으며 배선이 간단하다는 장점이 있다. 또한 MOST150 네트워크 환경에서는 카메라 노드와 디스플레이 노드를 plug-and-play 형태로 쉽게 장착할 수 있는 장점이 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.349-352
• /
• 2008

The most concerning issue in these days is the energy crisis by increasing threat of global warming and depletion of natural resources. In the situations, the Plug-in Hybrid Electric Vehicle (PHEV) is drawing attention from many countries for the next generation's car which has higher fuel efficiency and lower environmental impact. This paper presents simulation results about the limit capacity of central power-grid which doesn't have enough surplus electric power for charging PHEVs. Therefore, this paper also presents a smart charging system that can charge the PHEVs with a function of distributing demands of charging. The smart charging system is an agent facility between the government and consumer, which can recommend the best time to charge the battery of PHEVs by the lowest energy cost. This function of choosing time-slots is the technical system for the government which wants to control the consumption rate of electric power for PHEVs. Finally, this paper presents the economic feasibility of PHEVs from the two kinds of price system, midnight electric price and home electric price.