• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.2
• /
• pp.109-118
• /
• 1999

A model predicted describing the effect of cigarette making materials on the level of filter ventilation was developed and evaluated. The developed model was expressed in terms of a linear and quadratic relationship which was validated with experimental measurements for different porosity of plug wrap and tipping paper, unencapsulated pressure drop of filter plug and cigarette column and vent position. Forty-six experimental frequencies were determined as a result of using three levels with five factors Box-Behnken design and analyzed by the multiple regression analysis with backward stepwise in STATISTICA/PC under restricted conditions. The four factors, except filter pressure drop variable, were statistically significant at the level of 0.05 but most of all linear by linear interactions were comparatively lower significant. By the analysis of linear and quadratic regression coefficient, filter ventilation of the cigarette was affected by porosity of plugwrap (5.87, -4.25), porosity of tip paper (5.68, -1.00), vent position (-3.87, 3.08), tobacco column pressure drop (2.56, 0.66), and filter pressure drop (1.50, 0.58) in the decreasing order. It should be emphasized that the major conclusion of this study was not that any particular parameter was linear or quadratic on any limit scale, but that there were highly significant relationships among factors involving linear, quadratic and their interaction and perhaps even linearity between and within factors. While, there is also quite strong evidence that vent position from mouth end and cigarette making materials are reverse relationship on this experimental model. On the basis of the result, it can be concluded that the porosity of the plug wrap and tipping paper has a marked effect on degree of filter ventilation rate. The F-value of plug wrap and tipping paper porosity among five factors were 39.2 and 36.8 respectively with P-value of 0.000 indicating higher significant for both factors. According to the analysis of variance, the model fitted for filter ventilation was significant at 5% confidence level and the coefficient of determination ($R^2$=0.84) was the proportion to variability in the data well fitted for by the model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.5
• /
• pp.483-488
• /
• 2016

Plug-In Digital Framework is a system response analysis tool that is employed when system components are composed of black-box modules. Generally, the dynamic characteristics of joints between the system components significantly affect system responses, and they lead to displacement- and frequency-dependent stiffness and loss factor. Thus, the sensitivity of each joint parameters should be estimated from a global perspective. In this study, we introduce a global sensitivity analysis procedure under the Plug-In Digital Framework. To efficiently calculate the system responses, we introduce the frequency response function (FRF)-based substructuring method. Using the random balance designs (RBD), we generate the system responses and estimate the global first-order sensitivities for each joint stiffness. We apply the proposed global sensitivity analysis method to an interior noise problem of a passenger car, and we evaluate the efficiency of the global sensitivity analysis method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.50-58
• /
• 1999

This study was carried out to investigate the growth characteristics and propagation methods of L. obtusiloba as a woody landscape plant. The results are obtained as follows: L. obtusiloba was dioecious shrub and shaped with bush type. Leaves were ovate, obtuse, cordate, 7.05 cm long, 7.20 cm wide, and petiole 2.0 cm long. Flowers of L. obtusiloba were diclinous. Soil acidity ranged from pH 4.06 to 5.53 with the lowest at the Mt. Soo-Ri. Mt. Soo-Ri located near factory district, which was considered to damaged by environmental deteoration. While soil organic matter was highest at Mt. Soo-Ri, inorganic nutrients were low. L. obtusiloba grows in the area with low soil acidity and low content of inorganic. Therefore it seemed to be tolerant to air pollution. L. Obtusiloba was high seed germination rate in the plug box and its shoots were longer than seeding box and softwood cutting of L. obtusiloba showed the rooting rate of 50% at 5,000ppm on June 23. To develop a mass propagation method of Korean native L. obtusiloba through an axillary bud culture as a woody landscape plant, about 2∼3 cm shoots induced from explant were subcultured to new media contained different growth regulators. Shoots multiplied most effectively on a WPM containing 1.0 mg/l BA, producing 5.5 shoots with a shoot length of 2.5 cm per shoot explant.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.9
• /
• pp.99-104
• /
• 2014

This paper presents a unified live-streaming method based on Hypertext Mark-up Language 5(HTML5) for an IP camera which is independent of browsers of clients and is implemented with open-source libraries. Currently, conventional security systems based on analog CCTV cameras are being modified to newer surveillance systems utilizing IP cameras. These cameras offer remote surveillance and monitoring regardless of the device being used at any time, from any location. However, this approach needs live-streaming protocols to be implemented in order to verify real-time video streams and surveillance is possible after installation of separate plug-ins or special software. Recently, live streaming is being conducted through HTML5 using two different standard protocols: HLS and DASH, that works with Apple and Android products respectively. This paper proposes a live-streaming approach that is linked on either of the two protocols which makes the system independent with the browser or OS. The client is possible to monitor real-time video streams without the need of any additional plug-ins. Moreover, by implementing open source libraries, development costs and time were economized. We verified usefulness of the proposed approach through mobile devices and extendability to other various applications of the system.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.3
• /
• pp.181-186
• /
• 2021

The research was aimed to improve pre-harvest methods to maintain marketability in postharvest coniferous lettuce. Non-woven pots or plug plates were used to generate seedlings. No difference was found in growth characteristics of lettuce grown in non-woven pots vs plug plates. Since, seedling method with non-woven pots was convenient, lettuce harvested from non-woven pots used for water dipping treatment. The quality parameters, such as fresh weight loss, SPAD value, and appearance of lettuce were investigated after harvest. The lettuce with dipping treatment inside the plastic box container showed lower weight loss, higher SPAD value and better appearance compared to those exposed to the control (non-packaging) during the storage at 2℃. The treated plant showed higher SPAD and hue angle values 21.9 and 113.8°, respectively, compared to that of 18.8 and 108.3°, in non-treated plants. Therefore, it seems that the water dipping treatment is effective for storage method to maintain freshness of the lettuce. We showed the non-woven pot growing as a convenient seedling method for packaging treatment. Further studies will be continued to improve freshness postharvest of other horticultural crops.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.21-29
• /
• 2013

The short circuit and overload is presented by main cause of electrical fire. However, 85% of the fan directly connected the outlet box without switch in total 110 fans as a research in manufacturing industries. In installation direction of vertical type fans which was placed on the horizontal surface, only 39 vertical type fans were placed on vertical surface and 71 fans were placed on the horizontal type. The installation direction of the fans warns of the risk of the fire hazard due to the motor stall to the user manual of the maker. However, it is the representative nonconformity example of construction which the people or builder disregards. In addition, the condition of ground connection with the earth leakage prevention was investigated in grounding of 5 fans, non-grounding of 105 fans. The double insulation structure is generally used for small fan and it can't connect ground wire as electric plug of non-grounding type. However, industrial iron fan needs ground wire for electric leakage and to protect against electric shock.

• Journal of Korean Library and Information Science Society
• /
• v.44 no.2
• /
• pp.197-215
• /
• 2013

This study aims to explore the status and adoption pattern of next generation OPAC functionalities employed in Korean academic libraries. The paper is useful for future planning of next generation OPAC in academic libraries. This study firstly extracted major functionalities of next generation OPAC by reviewing literature and then the pilot test was conducted to validate them. The websites of 191 academic libraries in Korea were surveyed. For the accuracy of the data, the two researchers examined in redundant. The collected data were analyzed using PASW Statistics 18. 'Simple search box' was found to be the most popular function. The second popular function was 'search within results'. A few libraries used the 'clustering', 'open search plug-in', 'sort by relevance', and 'correct spelling error'.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.2
• /
• pp.130-138
• /
• 2011

This study was carried out to investigate growth characteristics and propagation methods of Clerodendron trichotomum for landscape uses. The results are obtained as follows: In the first place, Korean native C. trichotomum was printed in the "Enumeration of plants in Chosun" in 1937 by Tae Hyun Chung. C. trichotomum is a shrub with round shape. This is noted for its late summer flowers, showy fruit and malodorous foliage. White flowers in long-peduncled cymes bloom in the upper leaf axils from late summer into fall. Flowers are followed by small bright blue fruits, each subtended by a fleshy red calyx. C. trichotomum showed high seed germination rate and greater shoot length in plug box than in normal seeding bed. The rooting rate of C. trichotomum according to cutting date was highest on July 7. The optimum date for cutting was on July 7~10 when the shoots were more hardened. Soil acidity ranged from pH 4.58 to 5.52. The most effective method for rooting of C. trichotomum was treatment with 1,000 ppm IBA on July 7 cuttings, which showed rooting rate of over 90%. Korean native C. trichotomum was successfully propagated through soft cutting and seed.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3409-3416
• /
• 2023

Licensing the next-generation of nuclear reactor designs requires extensive use of Modeling and Simulation (M&S) to investigate system response to many operational conditions, identify possible accidental scenarios and predict their evolution to undesirable consequences that are to be prevented or mitigated via the deployment of adequate safety barriers. Deep Learning (DL) and Artificial Intelligence (AI) can support M&S computationally by providing surrogates of the complex multi-physics high-fidelity models used for design. However, DL and AI are, generally, low-fidelity 'black-box' models that do not assure any structure based on physical laws and constraints, and may, thus, lack interpretability and accuracy of the results. This poses limitations on their credibility and doubts about their adoption for the safety assessment and licensing of novel reactor designs. In this regard, Physics Informed Neural Networks (PINNs) are receiving growing attention for their ability to integrate fundamental physics laws and domain knowledge in the neural networks, thus assuring credible generalization capabilities and credible predictions. This paper presents the use of PINNs as surrogate models for accidental scenarios simulation in Nuclear Power Plants (NPPs). A case study of a Loss of Heat Sink (LOHS) accidental scenario in a Nuclear Battery (NB), a unique class of transportable, plug-and-play microreactors, is considered. A PINN is developed and compared with a Deep Neural Network (DNN). The results show the advantages of PINNs in providing accurate solutions, avoiding overfitting, underfitting and intrinsically ensuring physics-consistent results.

• Journal of KIISE:Software and Applications
• /
• v.31 no.8
• /
• pp.1027-1042
• /
• 2004

A Software Component is a module that is reused among a lot of projects, systems, and companies rather than a single application. Components can be reused in various systems if they provide not only the common functionalities required in many applications but also the diverse aspects to be customized for being suitable for customers' demands. From the development phase, components should be designed and developed considering the variable aspects they have for convenient customization. Easily customized components can be frequently reused in lots of applications. In the literature, there are some modeling and customizing techniques. But they suggested only conceptual or basic methods based on Object-Oriented. And the practical instructions for reusing component were not provided sufficiently. Moreover, there are few techniques that consider the proper variability types components have. Thus, those techniques are not appropriate for applying to black box component completely developed and released. In this paper, we classify variabilities that components have in functional aspect into two categories. The one is logic variability, and the other is workflow variability. For each classified variability, we propose the three kind of modeling techniques, which are selection, plug in and externalization. Also detailed instructions for practical design and application are provided.