• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.10
• /
• pp.789-796
• /
• 2016

The weight of an antenna system pointing satellite on the mobile platform is restricted by the weight limit of the mobile platform. The maximum power of the actuator driving the antenna system is thus limited because a high power actuator needs a heavier weight. Thus, a drive system is designed to have a low torque requirement by reducing the gravitational torque depending on gravity or acceleration of the mobile platform, including vibration, shock, and accelerated motion. To reduce the gravitational torque, the mathematical model of the gravitational torque is preferentially obtained. However, the method to directly estimate the mathematical model in an antenna system has not previously been reported. In this paper, a method is proposed to estimate the gravitational torque as a mathematical model in the antenna system. Additionally, a method is also proposed to calculate the optimal weight of the balancing weight to compensate for the gravitational torque.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.49-59
• /
• 1999

The mechanism of Stewart platform has many advantages for kinematic analysis and control. Thus there have been many research about employing this mechanism in the new type of machine tool. Since the vibration caused during the manufacturing process has a severely adverse effect on the machining precision. it is very important to enhance the vibrational characteristics. However. it is not easy to use finite element model for the vibration analysis. That is because the vibration behaviors of the structure vary in a complicated manner according as the length of links varies. In this paper, a Stewart platform type of machine tool is modeled in finite element method and then updated by using the experimental modal data. Finally. the static and dynamic characteristics of the finite element model are predicted and then discussed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.213-225
• /
• 2020

Floating Offshore Wind Turbines (FOWT) installed in the deep sea regions where stable and strong wind flows are abundant would have significantly improved energy production capacity. When designing FOWT, it is essential to understand the stability and motion performance of the floater. Water tank model tests are required to evaluate these aspects of performance. This paper describes a model test and numerical simulation for a 750-kW semi-submersible platform wind turbine model-II. In the previous model test, the 750-kW FOWT model-I suffered slamming phenomena from extreme wave conditions. Because of that, the platform freeboard of model-II was increased to mitigate the slamming load on the platform deck structure in extreme conditions. Also, the model-I pitch Response Amplitude Operators (RAO) of simulation had strong responses to the natural frequency region. Thus, the hub height of model-II was decreased to reduce the pitch resonance responses from the low-frequency response of the system. Like the model-I, 750-kW FOWT model-II was built with a 1/40 scale ratio. Furthermore, the experiments to evaluate the performance characteristics of the model-II wind turbine were executed at the same location and in the same environment conditions as were those of model-I. These tests included a free decay test, and tests of regular and irregular wave conditions. Both the experimental and simulation conditions considered the blade rotating effect due to the wind. The results of the model tests were compared with the numerical simulations of the FOWT using FAST (Fatigue, Aerodynamics, Structures, and Turbulence) code from the National Renewable Energy Laboratory (NREL).

• Cartoon and Animation Studies
• /
• s.45
• /
• pp.127-146
• /
• 2016

The most presentative case would be functional evolution of webtoon as a contents business model, which has taken a initiating role in both innovated strategic experiments and outcomes. Most of all, There are the launch of PPS(Page Profit Sharing) sevice in NAVER webtoon, the paid service model implementation in KAKAOpage and potential business as an exclusive application in Lezhin entertainment This study to analyze these phenomina and results can figure out how the business model in the webtoon platform is developed in various fields diversely and what makes this model evolved and extended. Especially, the diversification of the webtoon platform has been received attention since it pursued the grouped spin off through horizontal convergence and transformational expansion among similar platforms, and also this shows that which factors enhance these phenomina to be controled and expanded. On the basis of the result of this study, we try to find the way to connect business vision of the domestic webtoon platform with affiliated business. Furthermore, it proposes the interrelationship between this and the business strategy for overseas in the globalized platform.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2382-2389
• /
• 2012

The retaining wall with the relieving platform can be constructed as an alternative to the concrete retaining wall in which the economic and stability are decreased as height increases. The relieving platform has the advantage of decreasing the total lateral earth pressure on the retaining wall and increasing the overall stability of the structure. In this study, model tests were performed to determine the distribution of the earth pressure on the retaining wall with and without the relieving platform which located at a depth of 0.4H from the ground surface. And model tests results were compared with analyzed results by 2-D finite element method and values driven from theoretical equation. As the result of this study, comparing model test results with those of numerical analysis and theoretical equation show that the reduction of the lateral earth pressure on wall was indicated clearly on the retaining wall with a relieving platform.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.61
• /
• pp.249-272
• /
• 2014

The purpose of this study is to seek the revitalization plans of export platform for supporting export enterprise of the domestic public services. To activate the export platform, alternatives to two aspects are required as follows. First of all, a governance plan of export platform should be established. At present, an operation entity of export platform, which is still developing stage, is not yet established. In this situation, even though export platform developed, it will faced with inefficient operation. Therefore, an operation entity and appropriate business model are important to the platform activation. second, to activate platform, it is necessary to support export process of life cycle. In particular, the service, which can support the business strategies setting and project implementation stage, is required. In addition, in order to activate the export platform is need to operate with he government's support program.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.175-178
• /
• 1997

This study was carried out to obtain an analytical expression for the specifications of the Stewart Platform that minimize the maximum force acting on the hydraulic cylinder. The position and orientation of the platform were calculated by means of the inverse kinematic analysis. The maximum force to be exerted on a cylinder was calculated using the Newton's second law for the case when the platform is moved along a horizontal axis with 0.6 g, the maximum translational acceleration possible. This paper suggests a mathematical model to minimize the maximum actuating force using radius and angle ratios as design variables. Finally, a fuzzy set for the minimum actuating force is proposed for this dynamic optimal design problem.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.181-184
• /
• 2002

In this paper, an algorithm is proposed for the automatic movement of the platform on a ladder lift which operates by using hydraulic force. Experimental data of the manual movement operated by experts are acquired and analyzed. The length of movement of the platform is estimated by the number of pulses from an encoder while the platform is moving. The operating characteristics have been extracted from the data. The number of pulses varies whenever the weight of load varies. We propose a model to compensate the difference of the number of pulses. An automatic movement algorithm based on the model is proposed. The platform can start and stop smoothly at the starting point and the destination point. Experimental results show that the error distance at the destination point is less than 5 cm when the length of the ladder is 23 m.

• Management & Information Systems Review
• /
• v.15
• /
• pp.187-222
• /
• 2004

The existing fixed telematics facilities for car were restricting of efficiency, utilization, communication, possibility, so it become disconnected with reality in the domestic and foreign market within thy near future, like as the case of 'car-phone'. It is too difficult to make a various business model on the restrict basis. To solve these problems, We suggested Tablet PC system as a new mobile telematics platform. The telematics platform based on the Tablet PC realize the perfect office, because it shows an excellent portability, high power and extension, various input equipment, and environment of communication in the car. To realize this concreteness, it needs a proper marketing strategy for a new business model. For this purpose, We analyzed the structure of industry, selected a proper target market, and established the strategy of marketing. Additionally, We proposed new business models ; particularly Portal site, Car-Home network, Car Software Tuning, and T-Vaccine(Intelligent Car Inspection System). These are made possible by the only Tablet PC platform.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.3 no.3
• /
• pp.178-186
• /
• 2022

In order to support biomimicry technology development, it is necessary to develop an omnidirectional service platform which can recommend principles of biomimicry and business ideas, providing experts' networks and carrying out their relevant education and promotion on the ground of baseline data and application research materials related to biomimicry. This study was conducted to establish any probable plans for construction and utilization of the future open-platform which will collect and serve the technology of biomimicry. Accordingly, biological and ecological information databases were examined along with the appreciation of construction and management of major biomimicry DB, and, based on the materials from the interview of related experts, a customer journey map was schematized. Lastly, in order to suggest a mid-to-long-term target-model, the roles of a future biomimicry knowledge service-platform were determined along with the potential plans for its construction and management based on case analysis and customers' needs.