• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.653-661
• /
• 2006

Metallic sandwich plates with various inner cores have important new features with not only ultra-light material characteristics and load bearing function but also multifunctional characteristics. Because of production possibility on the large scale and a good geometric precision, sandwich plates with inner dimpled shell structure from a single material have advantages as compared with other solid sandwich plates. Inner dimpled shell structures can be fabricated with press or roll forming process, and then bonded with two face sheets by multi-point resistance welding or adhesive bonding. Elasto-plastic bending behavior of sandwich plates have been predicted analytically and measured. The measurements have shown that elastic perfectly plastic approximation can be conveniently employed with less than 10% error in elastic stiffness, collapse load, and energy absorption. The dominant collapse modes are face buckling and bonding failure after yielding. Sandwich plates with inner dimpled shell structure can absorb more energy than other types of sandwich plates during the bending behavior.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.285-288
• /
• 2007

레이저가공에서 나타나는 가공부위의 용융된 물질을 밀어내는 가스의 역할을 모사하기 위하여, 구멍이 있는 평판 상부에 충돌하는 마이크로 초음속 제트유동의 경계층 효과가 수치해석적으로 연구되었다. 충돌유동과 충격파의 구조 및 구멍통과 질량유량이 관찰되어 경계층 영향이 고려되지 않은 과거 연구와 비교되었다. 노즐내부 유동의 경계층 효과로 인하여 가공부위 상부에서 보다 강한 마하디스크가 생성되고, 아울러 구멍통과 질량유량도 줄어드는 것이 관찰되었다.

• Steel and Composite Structures
• /
• 제9권6호
• /
• pp.569-584
• /
• 2009

Corrosion of steel rebars in bridge decks which are faced to harsh conditions, is a common problem in construction industries due to the porosity of concrete. In this research, the behavior of one-way concrete slabs reinforced with Glass fiber reinforced polymer (GFRP) molded grating is investigated both theoretically and experimentally. In the analytical method, a closed-form solution for load-deflection behavior of a slab under four-point bending condition is developed by considering a concrete slab as an orthotropic plate and defining stiffness coefficients in principal directions. The available formulation for concrete reinforced with steel is expanded for concrete reinforced with GFRP molded grating to predict ultimate failure load. In finite element modeling, an exact nonlinear behavior of concrete along with a 3-D failure criterion for cracking and crushing are considered in order to estimate the ultimate failure load and the initial cracking load. Eight concrete slabs reinforced with steel and GFRP grating in various thicknesses are also tested to verify the results. The obtained results from the models and experiments are relatively satisfactory.

• Smart Structures and Systems
• /
• 제4권4호
• /
• pp.449-464
• /
• 2008

An array based, outward monitoring, ultrasonic guided wave based SHM technique using a single transmitter and multiple receivers (STMR), with a small footprint is discussed here. The previous implementation of such SHM arrays used a phase-reconstruction algorithm (that is similar to the beam-steering algorithm) for the imaging of reflectors. These algorithms were found to have a limitation during the imaging of defects/reflectors that are present in the "near-field" of the array. Here, the "near-field" is defined to be approximately 3-4 times the diameter of the compact array. This limitation is caused by approximations in the beam-steering reconstruction algorithm. In this paper, a migration-based reconstruction algorithm, with dispersion correction in the frequency domain, is discussed. Simulation and experimental studies are used to demonstrate that this algorithm improves the reconstruction in the "near-field" without decreasing the ability to reconstruct defects in the "far-field" in both isotropic and anisotropic plates.

• Advances in nano research
• /
• 제9권4호
• /
• pp.237-250
• /
• 2020

An accurate plate theory for assessing sandwich structures is of interest in order to provide precise results. Hence, this paper develops Layer-Wise (LW) theory for reaching precise results in terms of buckling and vibration behavior of Functionally Graded Carbon Nanotube-Reinforced Composite (FG-CNTRC) annular nanoplates. Furthermore, for simulating the structure much more realistic, its edges are elastically restrained against in-plane and transverse displacement. The nano structure is integrated with piezoelectric layers. Four distributions of Single-Walled Carbon Nanotubes (SWCNTs) along the thickness direction of the core layer are investigated. The Differential Quadrature Method (DQM) is utilized to solve the motion equations of nano structure subjected to the electric field. The influence of various parameters is depicted on both critical buckling load and frequency of the structure. The accuracy of solution procedure is demonstrated by comparing results with classical edge conditions. The results ascertain that the effects of different distributions of CNTs and their volume fraction are significant on the behavior of the system. Furthermore, the amount of in-plane and transverse spring coefficients plays an important role in the buckling and vibration behavior of the nano-structure and optimization of nano-structure design.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.120-131
• /
• 2007

A comprehensive short channel analytical model has been proposed for High Electron Mobility Transistor (HEMT) to obtain higher cut-off frequency maintaining the reliability of the device. The model has been proposed to consider generalized doping variation in the directions perpendicular to and along the channel. The effect of field plates and different gate-insulator geometry (T-gate, etc) have been considered by dividing the area between gate and the high band gap semiconductor into different regions along the channel having different insulator and metal combinations of different thicknesses and work function with the possibility that metal is in direct contact with the high band gap semiconductor. The variation obtained by gate-insulator geometry and field plates in the field and channel potential can be produced by varying doping concentration, metal work-function and gate-stack structures along the channel. The results so obtained for normal device structure have been compared with previous proposed model and numerical method (finite difference method) to prove the validity of the model.

• 대한구순구개열학회지
• /
• 제8권1호
• /
• pp.23-29
• /
• 2005

The facial cleft and duplicated maxilla are lire congenital anomaly. After Rushton and Walker had reported a unilateral facial cleft with excess tooth and bone formation in 1937, few authors described similar cases. The etiology of this anomaly is not well understood, but considered embryologically as a neurocristopathy. A neurocristopathy is defined as a condition arising from aberrations in early migration, growth and differentiation of neural crest cells. This aberrations result in facial malformation such as facial clefts and loss or duplication of facial structures. We experienced a male newborn baby with bilateral facial cleft and duplicated maxilla. The cleft was surgically corrected when he was 5 months old. The function and appearance of lip are improved. Duplicated maxilla will be surgically removed. We report this case with review of literatures.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.35-39
• /
• 2006

With a growing concern about the state of infrastructure worldwide, the demand for the development of reliable nondestructive testing techniques (NDT) is ever increasing. Among possible NDT techniques. microwave method is proven to be effective in fast and non-contact inspection of concrete structures and inclusions inside concrete. It is also found that the microwave method has a potential in detecting the delamination between fiber reinforced polymer (FRP) plate and concrete. On the other hand, ultrasonic method can be another way to find the delamination. In this paper, the research work needed for the development of a reliable microwave method and ultrasonic method is studied in actual measurements of concrete specimens reinforced with FRP. Concrete specimens are made with FRP and artificial delamination inside. A microwave measurement system with horn antennas with high center frequency and broad frequency bandwidth are used to image inside concrete specimens for the detection of debonding. between concrete and FRP. Also, the equipment of ultrasonic method which is commercialized are used at the same condition. Both of the results are analyzed in comparison of each other. Microwave and ultrasonic methods have been used for the detection of debonding between concrete and fiber-reinforced plastic (FRP).

• 대한조선학회논문집
• /
• 제39권2호
• /
• pp.61-68
• /
• 2002

K-a 관계가 동일하면, 선형파괴역학적 견지에서 균열개구 거동이 같다고 가정할 수 있다. 본 연구에서는 실제 구조물과 같은 K-a 관계를 주는 무한판 관통균열의 응력분포를 등가분포응력으로 정의한다. 실제 구조물과 동일한 K-a 관계가 구현되는 응력분포를 간단한 시험편에 작용시켜, 피로균열전파 해석을 수행하면 실제 구조요소의 피로전파수명 추정이 가능하다. 구조물에 대한 K-a 관계는 유한요소법 등의 이산화 수법 혹은 간이 추정법 등에 의하여 추정이 가능하다. 등가분포응력을 이용하여 유효 균열진전 음력을 구하는 방법의 타당성을 검토한다.

• 대한조선학회논문집
• /
• 제30권4호
• /
• pp.83-92
• /
• 1993

본고에서는 type B 독립구형 MRV 방식 LNG탱크의 극저온에 대한 구조안전성 평가기법을 연구 하였다. 여기에는 다음과 같은 3가지의 검토과정이 포함된다. 1) 탱크판을 관통하는 균열의 진전과정에서 누설되는 LNG의 양을 추정하고, 이에 따른 선체구조의 안전성을 보장하기 위하여 2차방벽의 설치범위를 결정한다. 2) 구형 LNG탱크시스템에 대한 정상상태 열전달해석 모형을 이용하여 화물창 및 스커트에 대한 온도분포해석을 수행하였다. 3) (2)항의 해석결과 가장 급격한 온도변화를 보이는 탱크와 스커트시스템의 연결부에 대한 열응력의 분포를 해석하였다.