• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.4
• /
• pp.117-124
• /
• 2012

The purpose of this study is the impact of the typhoon damage to housing and facilities in rural areas. House of damage, as well as the only including damage of facilities in rural areas, particularly greenhouse(Glass greenhouse, Plastic greenhouse, Vinyl greenhouse) leads to damage of crops the scale of the damage increases. In this study, focused on Jeollabuk-do area, accompanying him, the number of gale damage and evaluate the extent of the damage to the typhoon. And aims to provide basic data for the rural areas of strong winds and typhoons preparedness and facility design based on the results. Judging from the results of the analysis of natural disasters caused by typhoons and strong winds, the city formed mainly in the area than in the plains or coastal rural areas compared to other areas more damage can appear. In recent years, many design maximum wind speed of 40m/s wind over because disaster type, even if the standard installation, preferably determined through a precise structural analysis to ensure the structural history of acting urgently.

• Korean Journal of Plant Resources
• /
• v.23 no.6
• /
• pp.503-512
• /
• 2010

Anther derived double haploids (DHs) from sweet pepper genotypes ('Special', 'Derby', 'Bossanova', 'Fiesta', 'Debora' and 'Minipaprika') were used to study the agronomic variation in 2006. Ninety-nine successful DHs regenerants (32 from 'Special', 25 from 'Derby', 23 from 'Bossanova', 10 from 'Fiesta', 6 from 'Debora' and 3 from 'Minipaprika') were transplanted at plastic house and studied on their agronomic characters. Variation in agronomic characters was observed within the DHs of each genotype. DHs obtained from 'Derby' and 'Fiesta' exhibited wide variation in fruit yield $plant^{-1}$ whereas averaged fruit yield $plant^{-1}$ was highest in 'Derby' (1608 g) and less variation was observed in DHs of 'Bossanova'. Based on the agronomic characters expressed in DHs population at this environment, SP55, SP56, SP60, and SP116 from 'Special', SP8, SP10, SP14, SP16, and SP34 from 'Derby', SP115, SP119, SP142, SP143, SP196, and SP199 from 'Bossanova', SP41, SP45, and SP114 from 'Fiesta', SP21 from 'Debora' and SP91 from 'Minipaprika' identified as elite inbred lines and these DH lines could be used for commercial hybrids production in sweet pepper. Genetic relationship among the selected inbred lines using molecular markers and their response to diseases are further recommended to study.

• Journal of Environmental Science International
• /
• v.25 no.3
• /
• pp.337-343
• /
• 2016

The present study aimed to determine the influence of various root restriction media on seedling quality and early growth of strawberry after transplanting. The root activity of the seedlings, measured 20 days after fixation, was considerably higher (0.096, 0.090, and $0.063mg{\cdot}g^{-1}{\cdot}h^{-1}$ at 420, 450, and 480 nm, respectively) in expanded rice hull (ERH) treatment than in the sandy loam and loamy sand treatments. The volumetric water content (VWC) of the root media tested across 3 irrigation regimes (15 d, 30 d, 45 d) in the nursery field was highest in sandy loam (65.0-66.8%), followed by 59.4-61.3% in loamy sand and 38.6-45.3% in ERH. When growth parameters of runner plantlets were compared, ERH treatment was found to result in the highest crown thickness and fresh weights of root and above-ground parts. This had a favorable influence on above-ground tissue growth after transplanting to plastic house soil. As mentioned above, ERH treatment resulted in the highest seedling quality and early growth after transplanting. The results of this study would serve as useful on-site data for the production of high-quality strawberry seedlings.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.9
• /
• pp.815-824
• /
• 2015

In this study, we conducted the approximate multi-objective optimization of gap sizes of pressurized-water reactor (PWR) annular fuels. To determine the contacting tendency of the inner-outer gaps between the annular fuel pellets and cladding, thermoelastic-plastic-creep (TEPC)analysis of PWR annular fuels was performed, using in-house FE code. For the efficient heat transfer at certain levels of stress, we investigated the tensile, compressive hoop stress and temperature, and optimized the gap sizes using the non-dominant sorting genetic algorithm (NSGA-II). For this, response surface models of objective and constraint functions were generated, using central composite (CCD) and D-optimal design. The accuracy of approximate models was evaluated through $R^2$ value. The obtained optimal solutions by NSGA-II were verified through the TEPC analysis, and we compared the obtained optimum solutions and generated errors from the CCD and D-optimal design. We observed that optimum solutions differ, according to design of experiments (DOE) method.

• Transactions of Materials Processing
• /
• v.23 no.4
• /
• pp.231-237
• /
• 2014

In the current study, a rate-dependent crystal plasticity finite element method (CPFEM) was used to simulate flow stress behavior and texture evolution of a body-centered cubic (BCC) crystalline material during plastic deformation at room temperature. To account for crystallographic slip and rotation, a rate-dependent crystal constitutive law with a hardening model was incorporated into an in-house finite element program, CAMPform3D. Microstructural heterogeneity and anisotropy were handled by assigning a crystallographic orientation to each integration point of the element and determining the stiffness matrix of the individual crystal. Uniaxial tensile tests of single crystals with different crystallographic orientations were simulated to determine the material parameters in the hardening model. The texture evolution during four different deformation modes - uniaxial tension, uniaxial compression, channel die compression, and simple shear deformation - was investigated based on the comparison with experimental data available in the literature.

• Horticultural Science & Technology
• /
• v.29 no.2
• /
• pp.156-159
• /
• 2011

A new bright yellow gerbera (Gerbera hybrida Hort.), 'Sunmyo' was bred from a cross between red medium-gerbera 'Beauty' and yellow gerbera 'Tamara' in 2001. Characteristics trials were conducted three times from 2004 to 2006. Bred cultivar 'Sunmyo' showed bright yellow color (YG12B), black center, semi-double type, and middle size flower with stable flower shape. The average yield of 'Sunmyo' increased up to 37% (70.0 stems per year) as compared to control cultivar 'Biro' (51.0 stems per year). The vase life is 7.5 days. The survival rate is 85.0%, and days to first flowering are 95 in the plastic house passing the winter season.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.285-287
• /
• 2005

During fabrication of deck house block in passenger ships, the problem of unexpected large deformation and distortion frequently occurs. In this case, line and spot heating method were widely used to correct the distortion of thin plate structure. Spot heating was especially used for the case under 5mm thickness. Few papers are available on the working conditions of spot heating method but only little information on deformation control. In this study, evaluation was carried out on the temperature distribution of spot heating methods using FEA and practical experiments for various heating time. IIn FEA, heat input model was established using Tsuji's double Gaussian heat input mode (Tsuji, I., 1988). This model was verified by comparing with experimental data. Also radial shrinkage and angular distortion due to spot heating were determined and compared with experimental results. Thermo elasto-plastic analysis was performed using commercial FE code, MSC/MARC. Radial shrinkage and angular distortion were measured using 3D measuring apparatus. Based on these results, simplified analysis model for deformation by spot heating was established.

• The Journal of Natural Sciences
• /
• v.4
• /
• pp.161-177
• /
• 1991

This experiment was carrid out to investigate the effect of organic fertilizer and plant growth regulators application on the growth and quality of tomato. The results are summarized as follows. 1. Plant height of tomato was recorded highest when chemical fertilizer plus organic fertilizer was applied, and did not have significant effects in number of leaf. But stem diameter was positively effected by chemical plus organic fertilizer application than chemical fertilizer alone. 2. Flower formation, flower weight, anther weight and ovary weight were generally increased by organic fertilizer application. 3. Fruit-set and number of flower were significantly increased by organic fertilizer application. 4. Deformity fruit was the lowest rate at chemical plus organic fertilizer application when it was 14.7 percent, and it was increased by chemical fertilizer application. 5. Days of ripening was slightly delayed by organic fertilizer application and also flowering date shortened by chemical fertilizer application. 6. Plant growth regulators had positive effects on number of flower, flower weight, anther weight, and ovary weight, and variations of their effect by cluster were apparent. 7. Fruit-set was increased by 2,4-D 10ppm and BA 20ppm treatments but was decreased by treatments of Ethephon 10ppm and control. 8. By the BA 20ppm and 2,4-D 10ppm treatments, the rate of deformity fruit was decreased and fruit ripening date was also shortened.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.642-649
• /
• 2015

Resistance Spot Welding (RSW) is the method for joining two overlapped base materials when high pressure and current is applied from electrodes. Due to the safety problem such high pressure and voltage, automation should be early adopted. In this paper, the spot welding is developed as a computational model of wheel house from GM Korea and the welding condition such as weld sequence is considered. The computational analysis is preceded as a static and elasto-plastic procedure and used thermal expansion coefficient represents a dependency of spot volume between two panels. In case of welding sequence, the efficiency which depends on the distance between current spot point and the other is calculated in several cases.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.149-152
• /
• 2011

To improve the soil condition for no-tillage organic pepper cultivation, four different green manure crops were cultivated. Fertilizer supply was depended on the biomass of the cultivated green manure crops, nitrogen supplies were 314kg in Vicia villosa and 341kg $ha^{-1}$ in Vicia angustifolia. In the microbial community analyzed by phospholipid fatty acid (PLFA) method, soil microbe populations were different among the green manure crops and fungi group was increased at Vicia angustifloia and Vicia villosa. The biological ratio indexes of fatty acids in the soils, the ratio of Gram-negative to Gram-positive bacterial PLFA and Ratio of aerobes to anaerobes were high at Vicia hirsute and Vicia tetrasperma suggesting the enrich of the aerobic conditions. The ratio of saturated to unsaturated fatty acids increased at Vicia angustifloia and Vicia villosa suggesting anaerobic conditions. Abundant biomass and uncomposted organic matter, the ratio of fungi to bacteria was increased at Vicia angustifloia and Vicia villosa.