• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1705-1711
• /
• 2008

Analysis of settlement of foundation under the cyclic loading is very important element in the field construction. The fatigue of construct is inflicted by wheel load of mobile unit with railroad and superhighway. The settlement behavior under the cyclic loading is investigated through Power Model by Li and Selig. However, the settlement tendency of foundation appears to be the settlement of general Europe cohesive soil. In this study, the Power Model was used to determine the plastic deformation for sandy soil. Based on the laboratory cyclic loading test a, m, b parameters, for using in the Power Model were presented.

• 한국지반신소재학회논문집
• /
• 제11권3호
• /
• pp.1-9
• /
• 2012

흙노반으로 이루어진 철도 구간의 경우 반복적인 하중재하에 따라 탄성상태로 복귀하는 회복변형과 영구 변형이 동시에 발생한다. 따라서 열차하중이 반복적으로 작용하는 철도하부 지반에서의 변형예측을 위하여 반복하중에 대한 장기변형 예측이 필요하다. 본 논문에서는 최적함수비 범위에서의 최적함수비의 일반토사를 대상으로 진동삼축압축시험과 원형토조시험을 통해 반복하중에 따른 변형 특성을 비교하였으며, 파워함수 모델을 이용하여 각 재료별 축차응력과 반복횟수를 고려한예측모델식을 제안하였다.

• 한국지반공학회논문집
• /
• 제29권9호
• /
• pp.55-69
• /
• 2013

본 설계법은 기존 탄성이론에 근거한 강화노반 설계방법의 대안으로 노반의 소성침하와 열차 반복하중에 따른 응력-변형 특성을 고려한 노반 설계 방법이다. 특징은 설계자가 요구하는 허용설계기준에 따라 교통하중과 열차 년간 통과톤수에 따라 노반의 탄성변위 뿐만 아니라 소성침하량을 평가할 수 있다. 본 설계법을 이용하여 허용 탄성 및 소성 침하량, 열차 속도 및 총통과톤수등의 설계조건을 고려하여 호남고속철도 표준노반단면에 적용하였다. 그 결과 노반의 회복탄성계수 모델인자($A_E$), 일축압축강도, 흙 재료 종류 등의 요구수준 등을 평가할 수 있다.

• 한국지반환경공학회 논문집
• /
• 제16권12호
• /
• pp.13-22
• /
• 2015

노후된 하수관의 누수로 인해 발달된 지하공동은 지표침하를 발생시키고 그로 인한 포장재의 취성파괴를 유발시킨다. 이러한 도심지 지반함몰 현상은 최근 5년간 그 빈도수가 꾸준히 증가하고 있는 추세이다. 도심지 지표면은 대부분 아스팔트 또는 콘크리트로 포장이 되어 있어 지하공동의 발생에 따른 지반침하 또는 함몰을 예측하기 어려운 실정이다. 따라서 이 연구는 파손된 하수관의 누수로 인해 발생되는 지하공동의 진행에 따른 지표침하량, 지표면의 영향범위 등 지반거동 및 하수관의 침하를 유한요소해석을 이용하여 분석하였다. 또한 침하 또는 함몰이 발생된 지반을 보강하기 위한 보강재로 가소성유동화토를 사용하였을 때의 보강효과를 수치해석 프로그램을 이용하여 비교 분석하였으며 강도정수 산정을 위해 가소성유동화토의 직접전단시험을 수행하였다.

• Geomechanics and Engineering
• /
• 제20권5호
• /
• pp.371-384
• /
• 2020

A settlement prediction method based on shear wave velocity measurements and soil nonlinearity was recently developed and verified by means of centrifuge tests. However, the method was only applicable to heavily overconsolidated soil deposits under enlarged yield surfaces. In this study, the settlement evaluation method was refined to consider the stress history of the sublayer, based on an overconsolidation ratio evaluation technique, and thereby incorporate irrecoverable plastic deformation in the settlement calculation. A relationship between the small-strain shear modulus and overconsolidation ratio, which can be determined from laboratory tests, was adopted to describe the stress history of the subsurface. Based on the overconsolidation ratio determined, the value of an empirical coefficient that reflects the effect of plastic deformation over the elastic region is determined by comparing the overconsolidation ratio with the stress increment transmitted by the surface design load. The refined method that incorporate this empirical coefficient was successfully validated by means of centrifuge tests, even under normally consolidated loading conditions.

• Geomechanics and Engineering
• /
• 제20권4호
• /
• pp.275-285
• /
• 2020

Excavation usually induces considerable ground settlement in soft ground, which may result in damage of adjacent buildings. Generally, the settlement is predicted through elastic-plastic finite element method and empirical method with defects. In this paper, an analytical solution for predicting ground settlement induced by excavation is developed based on the definition of three basic modes of wall displacement: T mode, R mode and P model. A separation variable method is employed to solve the problem based on elastic theory. The solution is validated by comparing the results from the analytical method with the results from finite element method(FEM) and existing measured data. Good agreement is obtained. The results show that T mode and R mode will result in a downward-sloping ground settlement profile. The P mode will result in a concave-type ground settlement profile.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.92-98
• /
• 1998

Nonlinear finite element analyses of one dimensional consolidation problem were performed using an anisotropic hardening constitutive model. For the analyses, the anisotropic hardening elasto-plastic constitutive model based on the generalized isotropic hardening(GIH) rule was implemented into a nonlinear finite element analysis program, PLASTIC. In order to preserve the accuracy of the finite element solution for nonlinear problems, an implicit stress integration algorithm was employed. A consistent tangent moduli could also ensure the quadratic convergence of Newton's method. As a result, the nonlinear solution was accurately calculated and was converged to be asymptotically quadratic. In a consolidation problem, the relationship between load and settlement and between settlement and time vertical was analyzed comparing with results using the Cam-clay type model and the final consolidation settlement and the duration of primary consolidation could be evaluated rigorously using the GIH constitutive model.

• 한국철도학회논문집
• /
• 제5권2호
• /
• pp.70-76
• /
• 2002

In this study, performance of reinforced railroad roadbeds with the reinforced roadbed materials were investigated through the real scale roadbed tests. It was also found that the reinforced roadbed with reinforced roadbed materials has less elastic and plastic settlement than the one with soil. The slag roadbed was more effective than the crushed stone roadbed with the same condition for load distribution. Therefore considering overall characteristics of reinforced roadbed material, the optimum thickness was recommended as 50 cm. Furthermore the real scale model test under the simulated rainfall condition, the settlement in the slag roadbed was about 8 times smaller than the settlement in the soil roadbed.

• 한국철도학회논문집
• /
• 제2권4호
• /
• pp.20-31
• /
• 1999

When a foundation on the ground with tunnel is constructed, the ultimate bearing capacity of a footing is reduced by tunnel. In practice, structure may bate a considerable damage because of large settlement. This study shows that the settlement which is caused by variety of the ultimated bearing capacity leads fatal damages to the footing above tunnel. Therefore, it is necessary to study on the reduction both of the ultimate bearing capacity which leads a failure and of tolerable settlement which satisfies the safety of the building. For this reason, the variety of ultimated bearing capacity was analyzed using tub-dimensional elasto-plastic finite difference method in this paper. As a result, bearing capacity of the foundation above tunnel should be determined after establishing limit of allowable settlement and considering reduction-ratio of bearing capacity.

• 한국항해항만학회지
• /
• 제33권2호
• /
• pp.119-125
• /
• 2009

The effect of plastic board drains (PBDs)on ground improvement was checked out considering three crucial factors: ground settlement, undrained shear strength, and residual water head. First, the settlement analysis including initial settlement induced by reclamation of sand mat was conducted by back calculation analysis with measured data. Its result showed toot the PBDs used for this site worked well on improving soft ground. Secondly, the undrained shear strength was investigated by laboratory and in-situ tests including unconsolidated-undrained triaxial compression (UU) tests, unconfined compression tests, in-situ vane tests, and cone penetration tests. From the test results, they showed that the undrained shear strength of the improved ground by PBDs was significantly increased as well as the strength increasing ratio especially $10{\sim}15m$ below the ground surface on site. Thirdly, the residual water head measurement from the in situ dissipation test was found the same as the static water head, which indicated primary consolidation was completed and the effect of soil improvement with PBDs can be confirmed.