• International Journal of Computer Science & Network Security
• /
• 제24권6호
• /
• pp.89-98
• /
• 2024

Due to the increase in population and consequently the increase in the production of plastic waste, recovery of this part of the waste is an undeniable necessity. On the other hand, the recycling of plastic waste, if it is placed in a systematic process and controlled, can be effective in creating jobs and maintaining environmental health. Waste collection in many large cities has become a major problem due to lack of proper planning with increasing waste from population accumulation and changing consumption patterns. Today, waste management is no longer limited to waste collection, but waste collection is one of the important areas of its management, i.e. training, segregation, collection, recycling and processing. In this study, a systematic method based on machine vision for sorting plastic bottles in different colors for recycling purposes will be proposed. In this method, image classification and segmentation techniques were presented to improve the performance of plastic bottle classification. Evaluation of the proposed method and comparison with previous works showed the proper performance of this method.

• 자원리싸이클링
• /
• 제22권3호
• /
• pp.50-56
• /
• 2013

폐 디스플레이에서 발생하는 플라스틱을 재활용하여 실용적이고 경제성 있는 재생복합소재의 개발에 기여할 목적으로 ABS/PE(50/50과 20/80), ABS/GF (90/10) 복합 소재의 조성이 연신율에 미치는 효과를 연구하였다. PE 함량을 50%에서 80%로 증가시킨 폐플라스틱 재생복합소재의 인장시험 결과 전반적으로 연신율이 2.4%에서 13%로 증가하는 것이 관찰되었으나 유리섬유 첨가 시 인장강도와 연신율 모두 현저하게 감소하였다. 이러한 사실에 비추어 볼 때 PE의 함량에 따라 인장강도 등 다양한 기계적 특성의 조절이 가능함을 알 수 있었고 무엇보다도 플라스틱 사출성형에 투입되는 재생복합소재의 특성 중 아주 중요한 연신율을 향상시키는데 PE의 효과가 현저함을 알 수 있었다. 이는 ABS 자체의 우세한 비정질성이 결정성을 띈 PE의 첨가로 인해서 광범위하게 결정화된 결과 폐플라스틱 입자들 사이의 전단 응력이 감소하기 때문인 것으로 간주된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1546-1549
• /
• 2006

We have developed $EPLaR^{TM}$, a new way of making flexible electrophoretic displays. The TFTs have the same good performance, reliability and mature manufacturing processes as TFTs used in LCD monitors and LCD-TVs. We are working with partners to show that plastic displays can be made in existing TFT-LCD factories alongside glass LCDS. In this talk we describe the EPLaR process and show results for TFT arrays on plastic made in a factory by standard ${\alpha}$-Si TFT processing.

• 소성∙가공
• /
• 제6권6호
• /
• pp.489-499
• /
• 1997

The injection molding process is analyzed to get the information on the mold design parameters and the optimum process conditions for automotive plastic front fender. The gate position, runner size and cooling channel are determined by the estimation of the flow balance, packing time, uniform cooling and shrinkage and warpage in the injection molding analyses. The procedure can be used in the mold design in the early stage when developing plastic parts.

• 소성∙가공
• /
• 제28권6호
• /
• pp.354-360
• /
• 2019

The plastic strain ratio is one of the factors that affect the deep drawability of metal sheets. The plastic strain ratio of fully annealed Cu sheet is low because its texture has {001}<100>. In order to improve the deep drawability of Cu sheet, it is necessary to increase the plastic strain ratio of Cu sheet. This study investigate the increase of plastic strain ratio of a Cu sheet after the first asymmetry rolling and annealing, and the second asymmetry rolling and annealing in air and Ar gas conditions. The average plastic strain ratio (R_m) was 0.951 and |ΔR| value was 1.27 in the initial Cu sheet. After the second 30.1% asymmetric rolling and annealing of Cu sheet at 1000℃ in air condition, the average plastic strain ratio (R_m) was 1.03 times higher. However, |ΔR| was 0.12 times lower than that of the initial specimen. After the second 18.8% asymmetric rolling and annealing of Cu sheet at 630℃ in Ar gas condition, the average plastic strain ratio (R_m) was 1.68 times higher and |ΔR| was 0.82 times lower than that of the initial specimen. These results are attributed to the change of the texture of Cu sheet due to the different annealing conditions.

• 소성∙가공
• /
• 제28권5호
• /
• pp.287-293
• /
• 2019

The plastic strain ratio is one of the factors of the deep drawability of metal sheets. The plastic strain ratio of Al sheet is low value. Therefore, it is necessary to increase the plastic strain ratio in order to improve the deep drawability of the Al sheet. This study investigated the increase in the plastic strain ratio and the texture change of AA1050 Al sheet after the hot asymmetric rolling. The average plastic strain ratio of initial AA1050 Al sheets was 0.41. After 84% hot asymmetric rolling at $400^{\circ}C$, the average plastic strain ratio was 0.77. The average plastic strain ratio of 84% hot asymmetrically rolled AA1050 Al sheet at $400^{\circ}C$ is 1.9 times higher than that of initial AA1050 Al sheet. The ${\mid}{\Delta}R{\mid}$ of 84% hot asymmetrically rolled AA1050 Al sheet at $400^{\circ}C$ is 1/2 times lower than that of initial AA1050 Al sheet. This result is due to the development of the intensity of the ${\gamma}-fiber$ texture and the decrease of the intensity of {001}<100> texture after the hot asymmetric rolling of AA1050 Al sheet.

• 소성∙가공
• /
• 제28권5호
• /
• pp.281-286
• /
• 2019

The plastic strain ratio is one of the factors of the deep drawability of metal sheets. The plastic strain ratio of Al sheet is low value. Therefore, it is necessary to increase the plastic strain ratio in order to improve the deep draw ability of the Al sheet. This study investigated the increase of the plastic strain ratio and the texture change of AA3003 sheet after the hot asymmetric rolling. The average plastic strain ratio of the initial AA3003 sheets was 0.69. After 83% hot asymmetric rolling at $200^{\circ}C$, the average plastic strain ratio was 0.83. The average plastic strain ratio of the 83% hot asymmetrically rolled AA3003 sheet at $200^{\circ}C$ is 1.2 times higher than that of the initial AA3003 sheet. The ${\mid}{\Delta}R{\mid}$ of 83% hot asymmetrically rolled AA3003 sheet at $200^{\circ}C$ is 0.83 times lower than that of the initial AA3003 sheet. This result is due to the development of the intensity of ${\gamma}-fiber$ texture and reduces the intensity of {001}<110> and {001}<100> textures after hot asymmetric rolling of AA3003 sheet.

• 한국가구학회지
• /
• 제18권2호
• /
• pp.143-146
• /
• 2007

This study was carried out to assess the dimensional stability of wood material treated by plastic processing for bentwood and compression wood. The evaluation method was different between two wood materials, but the treatments for them were very similar to each other. One of the main methods is heat treatment with sufficient water vapor. In bentwood, the used species were painted maple (Acer mono), bitter wood (Picrasma quassioides) and birch (Betula schmidtii). Steaming was the worst treatment method for dimensional stabilization of bentwood. The best results could be attained with PEG treatment for dimensional stabilization of bentwood. Dimensional stability of bitter wood was found to be conspicuous. However the steaming treatment at lower temperatures, i.e., about $130^{\circ}C$ was not suitable for dimensional stability of bentwood. In compression wood, the used specimen was Italian poplar wood (Populus euramericana). Two heat compressive pressing conditions, an open-press system and an air-tighten closed-press system, were used. The recovery rate was measured after boiling and/or absorbing in water to estimate the dimensional stability of heat compressed wood. The best dimensional stability of compressed wood in the air-tighten closed-press system was found to be better at $200^{\circ}C$ than $180^{\circ}C$. The best compression rate for dimensional stability was 73 percent.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.569-571
• /
• 2010

본 논문에서는 플라스틱 제품의 공정 과정에서 발생하는 미성형, 이물질, 찍힘 등의 제품 불량을 검사하기 위한 비전 검사 시스템을 개발한다. 본 시스템의 검사 알고리즘은 플라스틱 제품의 곡면구조를 고려한 영상 2치화, 모폴로지 연산을 이용한 영상의 노이즈 제거 및 후보영역 구분을 위한 레이블링 기법, 최종 결함 유무 판단을 위한 영상 필터링 및 캘리브레이션(Calibration) 방법 등으로 구성된다. 또한 사용자를 고려한 GUI(Graphical User Interface) 기반의 고속 영상처리 알고리즘 개발을 통해 검사 효율 및 성능을 향상시킨다. 본 검사 시스템의 정확도, 검사 알고리즘 처리 시간 등의 평가를 통해 시스템의 유효성을 확인하였다.

• Archives of Plastic Surgery
• /
• 제40권2호
• /
• pp.134-140
• /
• 2013

Background The purpose of this study is to analyze the current attitudes toward professionalism, the core values, and the type of professionalism among plastic surgeons in Korea to establish a code of ethics regarding the role of professionalism for plastic and reconstructive surgeons. Methods From March 9, to July 1, 2012, face-to-face and mail surveys were conducted targeting the 325 participants (256 specialists and 69 residents) who are registered members of the Korean Society of Plastic and Reconstructive Surgeons. The proportion of each response given to an item was obtained through statistical processing through frequency analysis. The Mann-Whitney U test was used to compare the differences in the responses between the resident group and the specialist group. Results The survey results on the perception of professionalism in plastic surgery showed that a high proportion (90.5%) of the respondents viewed the future of plastic surgeons as bright. Through evaluation of the importance of the value items,"professional dominance" (4.58 pts), "autonomy" (4.45 pts), "lifestyle" (4.34 pts), and "commercialism" (4.31 pts) were assessed as critical values. "Altruism" (3.84 pts), "interpersonal competence" (3.79 pts), and "social justice" (3.61 pts) were viewed as lesser values. This difference showed the characteristics of an entrepreneurial outlook. Conclusions Plastic surgeons should pursue excellence, humanism, accountability, and altruism in order to overcome the crisis of professionalism in plastic surgery. In order to develop the necessary competencies of professionals, vocational education should be arranged by the Korean Society of Plastic Surgeons, and an appropriate code of ethics should be established.