• Tunnel and Underground Space
• /
• v.28 no.1
• /
• pp.59-71
• /
• 2018

Since the generalized Hoek-Brown (GHB) function predicts the strength of the jointed rock mass in a systematic manner by use of GSI index, it is widely used in rock engineering practices. In this study, a series of 2D elasto-plastic FE analysis, which adopts the GHB criterion as a yield function, was carried out to investigate the radial convergence characteristics of circular tunnel excavated in the GHB rock mass. The effect of the plastic potential function on the elasto-plastic displacement was also examined. In the analysis, the wide range of both the $K(={\sigma}_h/{\sigma}_v)$ and GSI values are considered. For each K value, the variation of the ratio of sidewall displacement to roof displacement was calculated with varying GSI values and the obtained displacement patterns were analysed. The calculation results show that the displacement ratio significantly depends not only on the K value but also on the range of GSI value. In particular, for lower range of GSI value, the displacement ratio pattern calculated in the elasto-plastic regime is opposite to that predicted by the elasticity theory. In addition, the variation of the radial displacement ratio with GSI value for different types of plastic potential function showed similar trend.

• Geomechanics and Engineering
• /
• v.12 no.3
• /
• pp.347-360
• /
• 2017

The problem of cylindrical cavity expansion incorporating deformation dependent of intermediate principal stress in rock or soil mass is investigated in the paper. Assumptions that the initial axial total strain is a non-zero constant and the axial plastic strain is not zero are defined to obtain the numerical solution of strain which incorporates deformation-dependent intermediate principal stress. The numerical solution of plastic strains are achieved by the 3-D plastic potential functions based on the M-C and generalized H-B failure criteria, respectively. The intermediate principal stress is derived with the Hook's law and plastic strains. Solution of limited expansion pressure, stress and strain during cylindrical cavity expanding are given and the corresponding calculation approaches are also presented, which the axial stress and strain are incorporated. Validation of the proposed approach is conducted by the published results.

• Archives of Plastic Surgery
• /
• v.42 no.4
• /
• pp.478-483
• /
• 2015

Due to the fact that it reliably results in positive outcomes, lymph node flap transfer is becoming an increasingly popular surgical procedure for the prevention and treatment of lymphedema. This technique has been shown to stimulate lymphoangiogenesis and restore lymphatic function, as well as decreasing infection rates, minimizing pain, and preventing the recurrence of lymphedema. In this article, we investigate possible additional benefits of lymph node flap transfer, primarily the possibility that sentinel lymph nodes may be used to detect micrometastasis or in-transit metastasis and may function as an additional lymphatic station after the excision of advanced skin cancer.

• Structural Engineering and Mechanics
• /
• v.57 no.6
• /
• pp.1015-1038
• /
• 2016

In the current research an advanced criterion with non-associated flow rule (non-AFR) for depicting the behavior of anisotropic sheet metals is presented to consider the strength differential effects (SDEs) for these materials. Owing to the fact that Lou et al. (2013) yield function is dependent on structure of an anisotropic material (BCC, FCC and HCP), an advanced yield function with inspiring of Yoon et al. (2014) yield function is proposed which is dependent upon anisotropic structures. Furthermore, to compute Lankford coefficients, a new pressure sensitive plastic potential function which would be dependent to anisotropic structure is presented and coupled with the proposed yield function with employing a non-AFR in a novel criterion which is called here 'dvanced criterion'. Totally eighteen experimental data are required to calibrate the criterion contained of directional tensile and compressive yield stresses for the yield function and directional Lankford coefficients for the plastic potential function. To verify the criterion, three anisotropic sheet metals with different structures are taken as case studies such as Al 2008-T4 (a BCC material), Al 2090-T3 (a FCC material) and AZ31 (a HCP material).

• Geotechnical Engineering
• /
• v.11 no.3
• /
• pp.81-90
• /
• 1995

Based on the close investigation of Lade elasto -plastic model, this study proposes a new elasto -plastic constitutive model for foundation composed of granular soils. The new model contains 1st stress invariant in plastic potential function as well as yield function, which is different from Lade original model. Both these functions called a correction function include a correction term. To validate the new analytical model, it was compered with some previous models. Comparison between the test results and numerical results using Lade and new model was carried out concerning Sacramento River sand, U.S.A and Backma River sand. The conclusion was obtained that more refined model well be deft.eloped throughout this research.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.821-825
• /
• 2007

In this study, the single hardening model with stress history-dependent plastic potential, which has been most recently proposed based on the critical state soil mechanics and needs few model parameters, was verified for the normally, lightly, and heavily over-consolidated clayey specimens. The triaxial compression tests were strictly conducted. The predictions using the single hardening model generally agree with the measurement. The discrepancy exists on its main focusing on the principal stress rotation; however, the plastic work H and the principal stress rotation angle ${\beta}$ are found to be effective indicators of loading history for the plastic potential function of the stress path dependent materials.

• Geotechnical Engineering
• /
• v.12 no.2
• /
• pp.95-106
• /
• 1996

In this study, a constitutive model which can describe the anisotropic and plastic behaviors of natural cohesive soils, was developed based on anisotropic bounding surface theory. The model was fomulated by the concepts of the improved anisotropic bounding surface function, nonassociated flow rule with new plastic potential function, anisotropic hardening rule, and new mapping rule governing the plastic behavior inside bounding sutraface. Comparing with the results of Ku consolidation and triaxial shearing tests, the predictions by the proposed model agree quite well with real soil responses.

• Journal of Powder Materials
• /
• v.29 no.4
• /
• pp.303-308
• /
• 2022

The plastic deformation behavior of additively manufactured anisotropic structures are analyzed using the finite element method (FEM). Hill's quadratic anisotropic yield function is used, and a modified return-mapping method based on dual potential is presented. The plane stress biaxial loading condition is considered to investigate the number of iterations required for the convergence of the Newton-Raphson method during plastic deformation analysis. In this study, incompressible plastic deformation is considered, and the associated flow rule is assumed. The modified return-mapping method is implemented using the ABAQUS UMAT subroutine and effective in reducing the number of iterations in the Newton-Raphson method. The anisotropic tensile behavior is computed using the 3-dimensional FEM for two tensile specimens manufactured along orthogonal additive directions.

• Archives of Plastic Surgery
• /
• v.47 no.5
• /
• pp.382-391
• /
• 2020

Facial palsy has a broad clinical presentation and the effects on psychosocial interaction and facial functions can be devastating. Pediatric facial palsy, in particular, introduces unique familial and technical considerations as anatomy, future growth potential, and patient participation influence treatment planning. Though some etiologies of pediatric facial palsy are self-limiting, congenital and long-standing facial palsies pose difficult challenges that require a combination of surgical, adjunctive, and rehabilitative techniques to achieve facial reanimation. Given the spectrum of ages and symptom severity, as well as the various surgical options available for facial palsy, a tailored approach needs to be developed for each child to restore facial balance and function. Here, we review the etiologies, workup, and treatment of pediatric facial palsy and present our novel algorithmic approach to treatment.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.4
• /
• pp.315-321
• /
• 1992

Tumors arising from nerve tissue are uncommon in the oral maxillofacial regions. Neurofibroma, a benign neurogenic tumor, can occur as circumscribed solitary or multiple lesions. A solitary neurofibroma is seldom undergo sarcomatous transformation, but fibromatosis is common. Therefore, it is important that we observe the oral and radiographic changes to help minimize the tremendous potential of the disease for facial disfigurement and altered function. The tumors were excised and there are no evidence of recurrence. The patients are satisfied with function and esthetic aspects.