• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2022

With the spread of COVID-19 worldwide, non-face-to-face services have grown rapidly, but at the same time, the problem of plastic waste is getting worse. Accordingly, eco-friendly policies such as carbon neutrality and sustainable circular economy are being promoted worldwide. Due to the high demand for eco-friendly products, the packaging industry is trying to develop eco-friendly packaging materials using PLA and PBAT and create new business models. On the other hand, Ulva australis occurs in large quantities in the southern seas of Korea and off the coast of Jeju Island, causing marine environmental problems. In this study, lactic acid was produced through dilute acid pretreatment, enzymatic saccharification, and fermentation processes to utilize Ulva australis as a new alternative energy raw material. In general, seaweeds vary in carbohydrate content and sugar composition depending on the species, harvest location, and time. Seaweed is mainly composed of polysaccharides such as cellulose, alginate, mannan, and xylan, but does not contain lignin. It is difficult to expect high extraction yield of the complex polysaccharide constituting Ulva australis with only one process. However, the fusion process of dilute acid and enzymatic saccharification presented in this study can extract most of the sugars contained in Ulva australis. Therefore, the fusion process is considered to be able to expect high lactic acid production yield when a commercial-scale production process is established.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.2
• /
• pp.85-93
• /
• 2006

This study was conducted to evaluate the optimal processing conditions of smoke-dried powdered oysters and to determine their shelf-life during storage for development of a natural oyster flavoring substance. The optimal conditions for processing of smoke-dried oyster powder with freshy oyster were as follows. Raw shelled oysters were rinsed with 3% saline solution, drained, boiled for 10 minutes at $98^{\circ}C$, and then smoked for 1 hour at $50^{\circ}C$, followed by drying for 4 hours at $80^{\circ}C$ Smoke-dried oyster powder with oyster scraps were prepared as flavoring material. The smoked oyster scraps were submerged in oyster sauce far 10 minutes at room temperature and then dried with hot air for 5 hours at $50^{\circ}C$. The smoke-dried oysters and smoke-dried oyster scraps were then pulverized to 50 mesh and packed in tea bags or vacuum-packed in laminated plastic film bags (PE/PVDC/CPP, $12{\mu}m/15{\mu}m/50{\mu}m$). Compared to non smoke-dried powdered oysters, the smoking and dipping in oyster sauce enhanced the flavor and prevented lipid oxidation of the smoke-dried powdered oyster product. Shelf-life tests indicated that the vacuum-packaging method preserved the quality of smoke-dried powdered oysters stored for 150 days at room temperature.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.63-69
• /
• 2019

Soldering technology has been used in electronic industry for a long time. However, due to solder fatigue characteristics, automotive electronics are searching the semi-permanent interconnection technology such as press-fit method. Press fit interconnection is a joining technology that mechanically inserts a press fit metal terminal into a through hole in a board, and induces a strong bonding by closely contacting the inner surface joining of the through hole by plastic deformation of press-fit terminal. In this paper, the bonding properties of press-fit interconnection are investigated with PCB hole size and surface finishes. In order to compare interconnection reliability between the press fit and soldering, the change in resistance of the press-fit and soldering joints was observed during thermal shock test. After thermal cycling, the failure modes are investigated to reveal the degradation mechanism both press-fit and soldering technology.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.239-246
• /
• 2017

Recently fiber-reinforced thermoplastic composites have attracted great interest from industry and study because they offer unique properties such as high strength, modulus, impact resistance, corrosion resistance, and damping reduction which are difficult to obtain in single-component materials. The demand for plastics is steadily increasing not only in household goods, packaging materials, but also in high-performance engineering plastic and recycling. As a result, the technology of recycling plastic is also attracting attention. In particular, many paper have studied recycling systems based on recycled thermoplastics. In this paper, properties of Glass Fiber Reinforced Thermoplastic(GFRTP) materials were evaluated using recycled PET for injection molding bicycle frame. The effect on thermal and mechanical properties of recycled PET reinforced glass chop fiber according to fiber cross section and fiber content ratio were studied. And it was compared void volume and torque energy by glass fiber cross section, which is round section and flat section. Mechanical characteristics of resulting in GF/rPET has been increased by increasing fiber contents, than above a certain level did not longer increased. And mechanical properties of flat glass fiber reinforced rPET with low void volume were most excellent.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.51-57
• /
• 2023

Because of the global pollution caused by plastic disposal, demand for eco-friendly transformation in the packaging industry is increased. As part of that, the utilization of polylactic acid (PLA) as a food packaging material is increased. However, it is necessary to improve the crystallinity of PLA by adding nucleating agents or to improve the modulus by adding fillers because of the excessive brittleness of the PLA matrix. Thus, the cellulose nanofiber (CNF) was fabricated and dried to obtain a powder form and applied to the CNF/PLA nanocomposite. The effect of CNF on the morphological, thermal, rheological, and dynamic mechanical properties of the composite was analyzed. We can confirm the impregnated CNF particle in the PLA matrix through the field emission scanning electron microscope (FE-SEM). Differential scanning calorimetry (DSC) analysis showed that the crystallinity of not annealed CNF/PLA nanocomposite was increased approximately 2 and 4 times in the 1st and 2nd cycle, respectively, with the shift to lower temperature of cold crystallization temperature (T_cc) in the 2nd cycle. Moreover, the crystallinity of annealed CNF/PLA nanocomposite increased by 13.4%, and shifted T_cc was confirmed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.816-822
• /
• 2001

The thermoforming process is widely used in the plastics industry to produce articles for the packaging, automotive, domestic construction and leisure industries. The microcellular foaming process appeared at M.I.T. in 1980s to save a quantity of polymer materials and increase their mechanical properties. The glass transition temperature of polymer materials is one of many important process variables in appling the microcellular foaming process to the conventional thermoforming process. The goal of this research is to evaluate the relation between gas absorption and glass transition temperature in batch process using microcellular foaming process. The weight gain ratio of polymer materials has a conception of gas absorption. Polymers such as acrylonitrile-butadiene-styrene(ABS), polystyrene(PS) have been used in this experiment. According to conventional Chows model and Cha-Yoon model, it was estimated with real experimental result to predict a change of glass transition temperature as a function of the weight gain ratio of polymer materials in batch process to gain microcellular foamed plastic products.

• Journal of Sensor Science and Technology
• /
• v.14 no.2
• /
• pp.69-77
• /
• 2005

The electronic nose (e-nose) has been used in food industry and quality controls in plastic packaging. Recently it finds its applications in medical diagnosis, specifically on detection of diabetes, pulmonary or gastrointestinal problem, or infections by examining odors in the breath or tissues with its odor characterizing ability. Moreover, the use of portable e-nose enables the on-site measurements and analysis of vapors without extra gas-sampling units. This is expected to widen the application of the e-nose in various fields including point-of-care-test or e-health. In this study, a PDA-based portable e-nose was developed using micro-machined gas sensor array and miniaturized electronic interfaces. The rich capacities of the PDA in its computing power and various interfaces are expected to provide the rapid and application specific development of the diagnostic devices, and easy connection to other facilities through information technology (IT) infra. For performance verification of the developed portable e-nose system, Six different vapors were measured using the system. Seven different carbon-black polymer composites were used for the sensor array. The results showed the reproducibility of the measured data and the distinguishable patterns between the vapor species. Additionally, the application of two typical pattern recognition algorithms verified the possibility of the automatic vapor recognition from the portable measurements. These validated the portable e-nose based on PDA developed in this study.