• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 하계 학술대회 논문집
• /
• pp.360-365
• /
• 2003

최적화의 개념은 목적에 따라 다양하겠으나 수치해석에서는 기본적으로 설계변수를 움직여 목적함수를 최소화 혹은 최대화하는데 있다. 열전달에서는 최소온도, motor를 설계할 때는 최대토크 등이 있고, 구조물설계에 있어서는 최소무게(Weight or Volume) 혹은 최대의 Frequency를 구하는데 최적화 수치해석이 이용되고 있다. 오늘날 컴퓨터하드웨어의 발달과 더불어 전산수치해석의 영역이 급속히 높아져가고 있으며 PC에서의 계산처리능력이 90년대의 work station급을 초가 함으로써 보다 쉽게 전산수치해석이 가능하게 되었다. (중략)

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.17.1-17.1
• /
• 2011

Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as a type of implantable LED biosensor and as a therapy tool.

• 신재생에너지
• /
• 제5권4호
• /
• pp.52-58
• /
• 2009

Upgrading of pyrolysis wax oil using HZSM-5 catalyst has been conducted in a continuous fixed bed reactor at $450^{\circ}C$, 1hour, LHSV 3.5/h. The catalytic degradation was studied with a function of catalyst amount and reaction temperature. The raw pyrolysis wax oil shows relatively high boiling point distribution ranging from around $300^{\circ}C$ to $550^{\circ}C$, which has considerably higher boiling point distribution than that of commercial diesel. The catalytic degradation using HZSM-5 catalyst shows the high conversion of pyrolysis wax oil to light hydrocarbons. The liquid product obtained shows high gasoline range fraction as around 90% fraction and considerably high aromatic fraction in liquid product. Here, the experimental variable such as catalyst amount and reaction temperature was influenced on the product distribution.

• Journal of Electrochemical Science and Technology
• /
• 제14권1호
• /
• pp.85-95
• /
• 2023

In recent years, solid-state Li metal batteries (SSLBs) have attracted significant attention as the next-generation batteries with high energy and power densities. However, uncontrolled dendrite growth and the resulting pulverization of Li during repeated plating/stripping processes must be addressed for practical applications. Herein, we report a plastic-crystal-based polymer/ceramic composite solid electrolyte (PCCE) to resolve these issues. To fabricate the one-side ceramic-incorporated PCCE (CI-PCCE) film, a mixed precursor solution comprising plastic-crystal-based polymer (succinonitrile, SN) with garnet-structured ceramic (Li₇La₃Zr₂O₁₂, LLZO) particles was infused into a thin cellulose membrane, which was used as a mechanical framework, and subsequently solidified by using UV-irradiation. The CI-PCCE exhibited good flexibility and a high room-temperature ionic conductivity of over 10^-3 S cm^-1. The Li symmetric cell assembled with CI-PCCE provided enhanced durability against Li dendrite penetration through the solid electrolyte (SE) layer than those with LLZO-free PCCEs and exhibited long-term cycling stability (over 200 h) for Li plating/stripping. The enhanced Li⁺ transference number and lower interfacial resistance of CI-PCCE indicate that the ceramic-polymer composite layer in contact with the Li anode enabled the uniform distribution of Li⁺ flux at the interface between the Li metal and CI-PCCE, thereby promoting uniform Li plating/stripping. Consequently, the Li//LiFePO₄ (LFP) full cell constructed with CI-PCCE demonstrated superior rate capability (~120 mAh g^-1 at 2 C) and stable cycle performance (80% after 100 cycles) than those with ceramic-free PCCE.

• 한국식품과학회지
• /
• 제18권6호
• /
• pp.479-484
• /
• 1986

농가(農家) 규모에서 활용(活用)이 가능한 경제적(經濟的)이며 제작(製作)이 간편한 태양열(太陽熱) 건조장치(乾燥裝置)로 평판식(平板式)과 튜브식(式) 집열기(集熱器)를 설계 제작하고 이들의 열이용(熱利用) 효율(效率)을 비교 분석(分析)하였는데, 집열판(集熱板)으로 흑색(黑色) 도색 함석판과 흑색(黑色) 비닐 필름을 사용하였을때 이들의 열이용(熱利用)의 효율(效率)은 평판식(平板式)에서 최대 48.2%, 평균 42.8%였고, 튜브식(式)에서 최대 25.4%, 평균 22.9%였다. 평판식(平板式)과 튜브식(式) 집열기(集熱器)에서 일사량(日射量), 방향계수, 공기의 풍량(風量)을 측정(測定)하여 공기의 온도상승도(溫度上昇度)를 예측(豫測)할 수 있는 실험식(實驗式)을 구하여, 필요한 건조(乾燥) 조건에 따라 집열면적(集熱面積)및 풍량(風量)을 결정할 수 있었다. 튜브식(式) 집열기(集熱器)를 사용해 고추를 건조(乾燥)한 결과(結果) 건조조작(乾燥操作)을 수행할 수 있었으며 건조속도(乾燥速度)는 노천건조(露天乾燥)에 比(비)헤 2배에 달하였다. 따라서 튜브식(式) 집열기(集熱器)를 농가(農家) 규모에서도 태양열(太陽熱) 이용(利用) 건조(乾燥)시설로 활용할 수 있었다.

• 한국주조공학회지
• /
• 제34권5호
• /
• pp.170-178
• /
• 2014

Using the Gleeble test, the effects of [Mn/S] ratios and the presence of sulfides on the high-temperature fracture morphology of heavy-section steel castings were analysed via the observations of the microstructures. The specimens for which the [Mn/S] ratio was in the range of 60~80 showed a ductile fracture morphology with an area reduction of more than 60%, while some specimens with similar [Mn/S] ratios showed a brittle fracture morphology with an area reduction of 0.0% due to the liquidation of sulfides at the grain boundary. The fracture morphology was classified into three types in the Gleeble high-temperature tensile test specimens. The first type showed dimple formation at the grain boundary, the formation of globular MnS sulfides, and plastic deformation of sulfides at an elevated temperature, indicating a needle-point type of ductile fracture with area reductions of 96.0~97.8%. The second type was a knife-edge type brittle fracture with an area reduction of 0.0% due to the film-type liquidation of sulfides at the grain boundary, band-type liquidation, and the liquidation of a terraced nipple pattern. The third type was the typical ductile fracture with an area reduction of 31.3~81.0%, in accordance with the mixture of dimples with in the grains and terraced nipple pattern at the grain boundary.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.389.2-389.2
• /
• 2016

The flexible solid state device has been widely studied as portable and wearable device applications such as display, sensor and curved circuits. A zero-bias operation without any external power consumption is a highly-demanding feature of semiconductor devices, including optical communication, environment monitoring and digital imaging applications. Moreover, the flexibility of device would give the degree of freedom of transparent electronics. Functional and transparent abrupt p/n junction device has been realized by combining of p-type NiO and n-type ZnO metal oxide semiconductors. The use of a plastic polyethylene terephthalate (PET) film substrate spontaneously allows the flexible feature of the devices. The functional design of p-NiO/n-ZnO metal oxide device provides a high rectifying ratio of 189 to ensure the quality junction quality. This all transparent metal oxide device can be operated without external power supply. The flexible p-NiO/n-ZnO device exhibit substantial photodetection performances of quick response time of $68{\mu}s$. We may suggest an efficient design scheme of flexible and functional metal oxide-based transparent electronics.

• 대한치과의사협회지
• /
• 제54권7호
• /
• pp.563-574
• /
• 2016

A clear overlay appliance is a type of a removable appliance made from transparent thermoplastic plastic film that covers the entire dentition to move the teeth. It is one of the most favored orthodontic methods opted for by adult patients; this treatment is esthetic, does not cause discomfort and allows oral hygiene to be easily managed when compared to other conventional fixed treatment methods. However, the use of clear overlay appliances, such as invisalign or clear aligner, is associated with various clinical challenges. In particular, the appliances require longer treatment periods compared to fixed treatment, and due to the structural characteristics of the appliances, it is difficult to make proper posterior occlusion and certain type of tooth movement, including extrusion, rotation and tip. Thus, the clear overlay appliances are regarded as supplementary appliances by most orthodontists and have been used for simple orthodontic treatments, such as partial anterior alignments or orthodontic relapse cases. Owing to the remarkable advancement in the field of 3D digital technology over a period of 15 years, the accuracy and convenience of modern clear overlay appliances have continuously improved. Moreover, orthodontic outcomes have also been greatly improved by the introduction of new materials and successful application of various biomechanical methods from conventional orthodontic treatments in the design of clear overlay appliances. This study investigates the clinical limitations that should be considered during the application of clear overlay appliances and also examines the efforts and methods used to overcome these challenges.

• Archives of Pharmacal Research
• /
• 제28권4호
• /
• pp.493-501
• /
• 2005

Effect of solvents on physical characteristics and release characteristics of monolithic acetaminophen (APAP) hydroxypropylmethylcellulose (HPMC) matrix granules and tablets were examined. Various types and amounts of solvents were employed for granulation and coating. APAP and other excipients were mixed and were then wet-granulated in a high-speed mixer. The dried granules were then directly compressed and film-coated with low viscosity grade HPMC. As the amount of water increased, the size of granules also increased, showing more spherical and regular shape. However, manufacturing problems such as capping and lamination in tableting occurred when water was used alone as a granulating solvent. The physical properties of HPMC matrix granules were not affected by the batch size. The initial release rate as well as the amount of APAP dissolved had a tendency to decrease as the water level increased. Addition of nonaqueous solvent like ethanol to water resulted in good physical properties of granules. When compared to water/ethanol as a coating solvent, the release rate of film-coated HPMC matrix tablets was more sensitive to the conditions of coating and drying in methylene chloride/ethanol. Most of all, monolithic HPMC matrix tablet when granulated in ethanol/water showed dual release with about $50\%$ drug release immediately within few minutes followed by extended release. It was evident that the type and amount of solvents (mainly water and ethanol) were very important for wet granulation and film-coating of monolithic HPMC matrix tablet, because the plastic deforming and fragmenting properties of material were changed by the different strengths of the different solvents.

• 한국포장학회지
• /
• 제12권1호
• /
• pp.63-73
• /
• 2006

한국의 시유 포장은 1937년 7월부터 현재 서울우유협동조합(그 당시 경성우유동업조합)이 1홉(hob : 180 ml, 0.048 standard gallon) 유리병에 지전(paper cap) 또는 콜크마개(cork cap)로 사용한 것이 최초였다. 그 이후(1945$\sim$1972)로 2홉 유리병 360 ml도 생산되었고 마개도 철전(iron cap)이나 plastic film을 씌운 뚜겅이 관모(egret, pappus)형태로 바뀌었다. 그 밖에 우유병이 부족하면 사이다병, 맥주병 등 유색유리용기가 사용되기도 하였다. 우유생산업체는 한국에서 서울우유협동조합만이 유일하게 있다가 1964년 3월 남양유업(주)이 창립되고, 1969년 현재 해태유업(그 당시 대한식품공사)이 설립, 1971년 5월 현재 매일유업(주)(그 당시 한국낙농유업) 등 여러 업체들이 점진적으로 설립되어 각 종의 낙농제품(dairy products, dairy manufactures)이 포장되어 생산되기 시작하였다. 그리고 1971년에 서울우유협동조합에서 처음으로 삼각형 폴리 에틸렌필름용기가 사용되었고 1972년에는 남양유업(주)의 종이용기인 Tetra pak 멸균팩을 수입하여 최초 사용하였다. 1974년경부터 사각형 폴리에틸렌필름포장과 플라스틱병 용기가 처음 선보였으며, 1977년에는 종이포장인 게이블톱 카튼팩(gable top carton pack)이 서주산업(주)에 의해 최초로 소개된 후 급격히 시장점유율이 확대되었고 용량에서도 180 ml에서 200 ml, 250 ml, 500 ml, 1,000 ml의 대형으로 서서히 바뀌었으며 그에 맞춰 소비량도 변화되었다. 그리고 파스퇴르 우유 490 ml의 포장을 1987년 9월에 국내 최초로 몸체는 고밀도 폴리에틸렌병(high density polyethylene bottle), 뚜껑은 저밀도 폴리에틸렌을 사용하였고 1992년 7월 남양유업은 다우(DOW)란 상품명으로 polyethylene병에 235g, 450g, 930g을 넣어 4각형 형태로는 최초 시판하였다.