• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.5
• /
• pp.367-372
• /
• 2000

The film-type specimen of poly ethylene terephthalate (PET) was stepwise elongated under tension with various speed range of about 0.5~500 mm/min, and then the necking behavior during its plastic deformation was observed. When elongated at the speed range of about 20~100 mm/min, stress oscillation was apparently occurred in the stress-strain curve. When elongated at the speed range of about 200~500 mm/min, stress oscillation was not did. The transparent/opaque zone and cross-section area in the specimen elongated at the speed of about 50 mm/min were examined using the optical microscopy and scanning electron microscopy. The corrosion characteristic of the specimen elongated at the speed of about 50 mm/min in 3.8 M NaOH alkali solution was examined using the optical microscopy.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.268-273
• /
• 2004

Deformation of single crystals was studied using finite element analysis to investigate the orientation dependence of plastic deformation observed in NiAl single crystals. Investigation of mechanical properties of single crystals is closely related with the understanding of deformation processes in single crystals. Orientation dependence of material behavior in NiAl single crystals was studied by rotating loading directions from 'hard' orientation. The maximum nominal compressed stress in NiAl single crystals was ranged in a quite wide scope depending on the misalignment from 'hard' orientation. As the compressed axis set closer to 'hard' orientation, the maximum nominal compressed stress rapidly increased and made <100> slips difficult to activate. Therefore, non-<100> slips will be activated instead of <100> slips for 'hard' orientation.

• Interaction and multiscale mechanics
• /
• v.4 no.2
• /
• pp.139-153
• /
• 2011

In this paper we develop a fully anisotropic pressure and temperature dependent model to investigate the effect of the microstructure on the shock response of ${\beta}$-HMX molecular single and polycrystals. This micromechanics-based model can account for crystal orientation as well as crystallographic twinning and slip during deformation and has been calibrated using existing gas gun data. We observe that due to the high degree of anisotropy of these polycrystals, certain orientations are more favorable for plastic deformation - and therefore defect and dislocation generation - than others. Loading along these directions results in highly localized deformation and temperature fields. This observation confirms that most of the temperature rise during high rates of loading is due to plastic deformation or dislocation pile up at microscale and not due to volumetric changes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1763-1766
• /
• 2007

Three technical obstacles must be overcome to build a fruitful business in the nascent industry of flexible microelectronics: the self-heating effect of thin film transistors (TFTs), the thermal and mechanical durability of flexible devices, and the cost issue. The self-heating effect is controlled through TFT shape, TFT electrical performance, dimensional reduction and energy-efficient circuits. Plastic engineering is one of the keys to solving thermal and mechanical durability problems faced by flexible microelectronics devices. For the Suftla flexible microelectronics business to be viable, Suftla transfer yield must be sufficiently high to keep down device cost. Improving the transfer yield is not easy, but it is the same challenge already faced and cleared in the TFT liquid crystal display industry.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.03a
• /
• pp.90-106
• /
• 1995

The "O"S' BONDING make metallic and non-metalic crystal structures and form localized superconducting orbitals , which induce electrical conduction , semi-conduction, and superconduction. The orbitals are proced by Ampere's law, Faraday's law , Meissner effect, highcritical temperature of thecopper oxide layers. abnomal trans-membrane signal in cancer cell and plastic deformations bytwins and dislocations, In the case of alloying metals, the most deterimentla cases of electrical conduction are those of solid solution and intermetalic compound . The highest case for the hardness are also those of solid solution and intermetallic compound. It explains the contributions of the "O"S' BONDING for conduction bands and plastic deformation by twins and dislocations.ns and dislocations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.476-479
• /
• 2005

We developed a plastic bistable LCD based on the suspension of sub-micron ferroelectric particles in a cholesteric liquid crystal. 2.5 inch $160{\times}160$ pixel display with enhanced contrast and improved electro-optical characteristics was achieved. The display is extremely light and possesses good flexibility, demonstrating multifold bending in a radius about 1.5 cm.

• Nuclear Engineering and Technology
• /
• v.32 no.5
• /
• pp.457-464
• /
• 2000

In this paper, we describe the results of various calculations performed for a design of the thickness gauges that use the gamma-ray backscattering method. The radiation source is assumed to be the $_{24}$1Am(60keV gamma-ray) and the detector is a single crystal scintillator in a cylindrical form. The source is located at the center of the detector with the collimator of a cylindrical shape. First, when gamma-rays are incident on a material with a constant angle, we compute the variations of the spectrum for the photons scattered into different angular intervals. Next, we compute for an optimal size for the collimator cylinder for a fixed detector size and an optimal distance from the detector to the material. Finally, we compute the number of observed photons for different thickness of two different materials, a plastic film and an Al foil.

• Transactions of Materials Processing
• /
• v.30 no.4
• /
• pp.186-194
• /
• 2021

Finite element simulation is a widely applied method for practical purpose in various metal forming process. However, in the simulation of elasto-plastic behavior of porous material or in crystal plasticity coupled multi-scale simulation, it requires much calculation time, which is a limitation in its application in practical situations. A machine learning model that directly outputs the constitutive equation without iterative calculations would greatly reduce the calculation time of the simulation. In this study, we examined the possibility of artificial intelligence based constitutive equation with the input of existing state variables and current velocity filed. To introduce the methodology, we described the process of obtaining the training data, machine learning process and the coupling of machine learning model with commercial software DEFROM^TM, as a preliminary study, via rigid plastic finite element simulation.

• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.285-290
• /
• 2012

In spite of progress in predicting ductile failure, the development of a macroscopic yield criterion to describe damage evolution in HCP (hexagonal close-packed) materials remains a challenge. HCP materials display strength differential effects (i.e., different behavior in tension versus compression) in their plastic response due to twinning. Cazacu and Stewart(2009) developed an analytical yield criterion for porous material containing randomly distributed spherical voids in an isotropic, incompressible matrix that shows tension-compression asymmetry. The goal of the calculations in this paper is to investigate the effect of the tension-compression asymmetry on necking induced by void nucleation, evolution and consolidation. In order to investigate the effect of the tension-compression asymmetry of the matrix on necking and fracture initiation, three isotropic materials A, B, and C were examined with different ratios of tension-compression asymmetry. The various types of material had BCC, FCC, and HCP crystal structures, respectively. The ratio between tension and compression in plastic flow significantly influences the fracture shape produced by damage propagation as well as affecting the localized neck.

• Transactions of Materials Processing
• /
• v.26 no.5
• /
• pp.286-292
• /
• 2017

Magnesium alloy shows strong anisotropy and asymmetric behavior in tension and compression curve, especially at room temperature. These characteristics limit the application of finite element method (FEM) which is based on conventional continuum mechanics. To accurately predict the material behavior of magnesium alloy at microstructural level, a methodology of fully coupled multiscale simulation is presented and a crystal plasticity model as a constitutive equation in the simulation of metal forming process is introduced in this study. The existing constitutive equation for rigid plastic FEM is modified to accommodate deviatoric stress component and its derivatives with respect to strain rate components. Viscoplastic self-consistent (VPSC) polycrystal model was selected as a constitutive model because it was regarded as the most robust model compared to Taylor model or Sachs model. Stiffness matrix and load vector were derived based on the new approach and implemented into $DEFORM^{TM}-3D$ via a user subroutine handling stiffness matrix at an elemental level. The application to extrusion and rolling process of pure magnesium is presented in this study to assess the validity of the proposed multiscale process.